Pass-through sewer with PP K2

Sewer System

External corrugated sewer with PP K2-Kan is designed for plumbing and sewer systems. The system is based on orange pipes and fittings in diameters from fi 110mm to fi 2400mm. Durability and usability make our products widely used in residential and general construction.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

K2-canalization pipe with PP
Flow pipes
Perforated SN8
Perforated pipes
OD-Form Fittings
OD-Form Fittings
K2-Kan outer form fittings with PP
ID-Form Fittings
Corrugated (structural) elbow with PP DN 1000 angle 30 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 1000 angle 30 degree
Corrugated (structural) Elbow K2-Kan with diameter fi 1000mm angle 30 degrees, single-hull, with Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange < span>Mis intended for the construction of sanitary and non-sewage sewer. The knee is made of the highest quality plastic with one cup without gasket, it is durable and tight in joints.
Details View details  
Corrugated (structural) cap with PP DN 200mm
Out-of-Stock
Corrugated (structural) cap with PP DN 200mm
A corrugated (structural) K2-Kan with a diameter of fi 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The cap is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Crimed coupling (structural) with PP DN 200mm
Out-of-Stock
Crimed coupling (structural) with PP DN 200mm
The K2-Kan corrugated (structural) coupling with a diameter of fi 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Flake Tee (structural) with PP DN 200/160 angle 90 degrees
Flake Tee (structural) with PP DN 200/160 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 200/160mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake Tee (structural) with PP DN 200/160 angle 45 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 200/160 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 200/160mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Corrugated (structural) elbow with PP DN 160 Angle 30 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 160 Angle 30 degree
The K2-Kan corrugated (structural) elbow is a diameter of 30 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and non-float sewer. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Corrugated pipe (structural) with PP DN/ID 200x3000mm
Out-of-Stock
Pass pipe (double-walled) PP DN/ID 200x3000mm
Corrugated pipe (structural) with an internal diameter of fi 200mm with a length of 3 meters, with the Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy-duty type SN 8, in Orange, is designed for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Details View details  
Corrugated pipe XXL with PE SN 8 DN 2400x6000mm
Out-of-Stock
PE Culvert Pipe SN8 DN 400x6000mm
Corrugated pipe (structural) XXL with an inner diameter of fi 400mm with a length of 6 meters, with the Polish standard PN-EN 13476-3, made of polyethylene (PE), heavy type SN 8, in black, is designed for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Details View details  
Drain pipe PP DN 300mm TP (360 °) SN8 ID in geotarking with elevated perforation (6 m stretch)
Out-of-Stock
Drain pipe PP DN 300mm TP (360 °) SN8 ID in geotarking with elevated perforation (6 m stretch)
TP Drainage pipe (360st perforation) fully oozing, SN 8 ID in geotarking with raised perforation of a diameter of 6MB, with Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is intended for Dewatering of land and areas around industrial sites, airports, roads and motorways and farmlands, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 200mm TP (360 °) SN8 ID in geotarking (6 m stretch)
Out-of-Stock
Drain pipe PP DN 200mm TP (360 °) SN8 ID in geotarking (6 m stretch)
TP Drain Pipe (360st perforation) fully oozing, SN 8 ID in geotartry with a diameter fi 200mm with a length of 6MB, with the Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is intended for drainage of land and areas around Industrial areas, airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 200mm LP (220 °) SN8 ID in geotarking (6 m stretch)
Out-of-Stock
Drain pipe PP DN 200mm LP (220 °) SN8 ID in geotarking (6 m stretch)
LP Drain Pipe (220st perforation) partially oozing, SN 8 ID in geotartry with a diameter of fi 200mm with a length of 6MB, with the Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering of land and areas Around industrial sites, airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water
Details View details  
Drain pipe PP DN 200mm MP (120 °) SN8 ID in geotarking (6 m stretch)
Out-of-Stock
Drain pipe PP DN 200mm MP (120 °) SN8 ID in geotarking (6 m stretch)
MP Drain Pipe (120st perforation) fully oozing, SN 8 ID in geotartry with fi 200mm diameter of 6MB, with Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for drainage of land and areas around Industrial areas, airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 110mm LP (220 °) SN8 in Geotarking (6 m stretch)
Out-of-Stock
Drain pipe PP DN 110mm LP (220 °) SN8 in Geotarking (6 m stretch)
LP Drain Pipe (220st perforation) partly oozing, SN 8 in geotartry with a diameter of 6mb fi 110mm, with Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is intended for drainage of land and areas Around industrial sites, airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 200mm TP (360 °) SN8 ID (6 m section)
Out-of-Stock
Drain pipe PP DN 200mm TP (360 °) SN8 ID (6 m section)
TP Drain Pipe (360st perforation) fully sown, SN 8 ID with a diameter of 6mb fi 200mm, with Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas around Airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 200mm LP (220 °) SN8 ID (6 m section)
Out-of-Stock
Drain pipe PP DN 200mm LP (220 °) SN8 ID (6 m section)
LP Drain Pipe (220st perforation) semi-tangle, SN 8 ID with a diameter of 6mb fi 200mm, with Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas around Airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 200mm MP (120 °) SN8 ID (6 m section)
Out-of-Stock
Drain pipe PP DN 200mm MP (120 °) SN8 ID (6 m section)
MP Drain Pipe (120st perforation) fully sown, SN 8 ID with a diameter of 6mb fi 200mm, with Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas around Airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Corrugated pipe (without chalch) with PP DN 300x3000mm
Out-of-Stock
Pass-through pipe (double-walled) PP DN 300x3000mm
Corrugated pipe (structural) without a cup of K2-Kan with an internal diameter of 3 meters fi 300mm, with Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy type SN 10, in Orange, is intended for the construction of sanitary sewer and Nationwide. Pipes made of the highest quality plastic with gasket consist of two sturdy layers in this single corrugated.
Details View details  
Corrugated pipe (structural) with PP SN 16 DN/ID 250x3000mm
Out-of-Stock
Pass-through pipe (double walled) PP SN 16 DN/ID 250x3000mm
Corrugated pipe (structural) with an internal diameter of 3 meters fi 250mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy type SN 16, in Orange, is designed for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Details View details  
Corrugated pipe (structural) with PP SN 12 DN/ID 250x3000mm
Out-of-Stock
Pass-through pipe (double walled) PP SN 12 DN/ID 250x3000mm
Corrugated pipe (structural) with an internal diameter of 3 meters fi 250mm, with Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy type SN 12, in Orange, is intended for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Details View details  
Fifth Wheel connection with PP DN 400/160
Out-of-Stock
Fifth Wheel connection with PP DN 400/160
The saddle connection with the entrance to the smooth PVC pipe with a diameter of DN 400/160, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Leak-proof transition from PP DN 250mm
Out-of-Stock
Leak-proof transition from PP DN 250mm
The passage sealed with the entrance to the smooth PVC pipe with a diameter of DN 250mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Cork with PP DN 250mm
Out-of-Stock
Cork with PP DN 250mm
Cork with the entrance to the smooth PVC pipe with a diameter of DN 250mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Reduction from PP DN 315/200
Out-of-Stock
Reduction from PP DN 315/200
The reduction from the entrance to the smooth PVC pipe with a diameter of DN 315/200, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the flow pipes in the construction of sanitary and general sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Tee with PP DN 200 angle 45
Out-of-Stock
Tee with PP DN 200 angle 45
The tee with the entrance to the smooth PVC pipe with a diameter DN 200mm angle 45, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Knee with PP DN 160 angle 45
Out-of-Stock
Knee with PP DN 160 angle 45
A pass-through elbow with a diameter of DN 160mm 45 angle, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary and general sewer. Made of high quality plastic with gasket, it is durable and tight in joints.
Details View details  
Cap with PP DN 250mm
Out-of-Stock
Cap with PP DN 250mm
The cap with the entrance to the smooth PVC pipe with a diameter of DN 250mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Coupling z PP DN 250mm
Out-of-Stock
Coupling z PP DN 250mm
The coupling with the entrance to the smooth PVC pipe with a diameter of DN 250mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
"In situ" four-lip gasket PP DN 200mm
Out-of-Stock
"In situ" four-lip gasket PP DN 200mm
The "in situ" four-lip gasket with the entrance to the PVC smooth pipe with a diameter of DN 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
GASKET with PP DN 250mm
Out-of-Stock
GASKET with PP DN 250mm
The gasket with the entrance to the smooth PVC pipe with a diameter of DN 250mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
PVC Cup coupling with PP DN 250mm
PVC Cup coupling with PP DN 250mm
The PVC Cup coupling with the entrance to the smooth PVC pipe with a diameter of DN 250mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary and general sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Plain pipe coupling with PP DN 250mm
Out-of-Stock
Plain pipe coupling with PP DN 250mm
The coupling (ring with gasket) with the entrance to the smooth PVC pipe with a diameter of DN 250mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Pass-through pipe PP SN8 DN/OD 200x3000mm
Out-of-Stock
Pass-through pipe PP SN8 DN/OD 200x3000mm
Corrugated (structural) pipe with an external diameter of 3 meters, with the Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy-duty type SN 8, in Orange, is intended for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Details View details