ID-Form Fittings

A seal for the (corrugated) flow pipe K2-Kan with a diameter of fi 160mm, double-lip, with the Polish standard PN-EN 13476-3, in black, is intended for the watertight joining of the pass pipes in the construction of sanitary and general sewer. Gasket made of the highest quality plastics, it is durable and tight in joints.

The K2-Kan saddle connection, with a diameter of 250-160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the connection of mechanical pipes in the construction of sanitary and universal sewer. The connection made of the highest quality plastic with gasket, is durable and tight in joints.

Corrugated Cork (inner to cup) K2-Kan with a diameter of fi 800mm, with Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for sealing closure of sewage systems in sanitary construction and Combined. Cork made of the highest quality plastic without gasket, is sturdy and sealed in joints.

Crimped Cork (external) K2-Kan with a diameter of fi 800mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for sealing the ends of sewage systems in sanitary and non-float construction . Cork made of the highest quality plastic without gasket, is sturdy and sealed in joints.

Crimped Cork (Universal) K2-Kan with a diameter of fi 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for sealing the ends of sewage systems in sanitary construction and Combined. Cork made of the highest quality plastic without gasket, is sturdy and sealed in joints.

The passage of a tight corrugated (structural) K2-Kan with an internal diameter of fi 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for a sealed connection of any type of sewer pipe, with Concrete wells. The transition made of the highest quality plastics without gasket, is durable and tight in joints.

Corrugated (structural) Reduction K2-Kan BK/KG with a diameter of fi 200/160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and general sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  

The corrugated (structural) reduction of the K2-Kan BK with a diameter of fi 250/200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  

The corrugated (structural) reduction of the K2-Kan with a diameter of fi 200/160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the flow pipes in the construction of sanitary and general sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  

Corrugated (structural) coupling with the entrance to the smooth pipe with a cup of PVC K2-Kan with a diameter of fi 160/160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the flow pipes in the construction Sanitary sewer system. The coupling is made of the highest quality plastic without gasket, it is durable and tight in joints.

Corrugated (structural) coupling with the entry into the cup of PVC K2-Kan with a diameter of fi 160/160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for joining the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic without gasket, it is durable and tight in joints.

Corrugated (structural) Elbow K2-Kan, diameter fi 1000mm, angle 15 degrees, single-hull, with Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange < span>Mis intended for the construction of sanitary and non-sewage sewer. The knee is made of the highest quality plastic with one cup without gasket, it is durable and tight in joints.

The K2-Kan corrugated (structural) cap with a diameter of fi 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The cap is made of the highest quality plastic without gaskets, is durable and tight in joints.

The K2-Kan corrugated (structural) coupling with a diameter of fi 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic without gaskets, is durable and tight in joints.

Corrugated Tee (structural) K2-Kan with a diameter of 160/160mm, angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.

Corrugated Tee (structural) K2-Kan with a diameter of 160/160mm, angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.

Corrugated Tee (structural) K2-Kan with a diameter of 160/160mm angle 90 degrees, with a departure to the smooth pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary and general sewage. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.

Corrugated Tee (structural) K2-Kan with a diameter of 160/160mm angle 45 degrees, with a departure to the smooth pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary and general sewage. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.

Corrugated (structural) Elbow K2-Kan with a diameter of 15 degrees fi 160mm, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and non-float sewer. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.

A seal for the (corrugated) pass pipe K2-Kan with a diameter of fi 200mm, double-lip, with the Polish standard PN-EN 13476-3, in Black, is designed for watertight joining of the pass pipes in the construction of sanitary and general sewer. Gasket made of the highest quality plastics, it is durable and tight in joints.

The K2-Kan saddle connection, with a diameter of 300-160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the connection of mechanical pipes in the construction of sanitary and non-sewage sewer. The connection made of the highest quality plastic with gasket, is durable and tight in joints.

Crimped Cork (inner to cup) K2-Kan with a diameter of fi 1000mm, with Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for sealing the ends of sewage systems in sanitary construction and Combined. Cork made of the highest quality plastic without gasket, is sturdy and sealed in joints.

Crimped Cork (external) K2-Kan with a diameter of fi 1000mm, with Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for sealing the ends of sewage systems in sanitary construction and Combined. Cork made of the highest quality plastic without gasket, is sturdy and sealed in joints.

Crimped Cork (Universal) K2-Kan with a diameter of fi 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for sealing the ends of sewage systems in sanitary construction and Combined. Cork made of the highest quality plastic without gasket, is sturdy and sealed in joints.

The passage of a tight corrugated (structural) K2-Kan with internal diameter fi 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for a sealed connection of any type of sewer pipe, with Concrete wells. The transition made of the highest quality plastics without gasket, is durable and tight in joints.

The corrugated (structural) reduction of K2-Kan BK/KG with a diameter of fi 250/160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the flow pipes in the construction of sanitary and general sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  

The corrugated (structural) reduction of K2-Kan BK with a diameter of fi 300/200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the flow pipes in the construction of sanitary and general sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  

Corrugated (structural) coupling with the entrance to the smooth pipe with a cup of PVC K2-Kan with a diameter of fi 200/200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction Sanitary sewer system. The coupling is made of the highest quality plastic without gasket, it is durable and tight in joints.

Corrugated (structural) coupling with the entry into the cup of PVC K2-Kan with a diameter of fi 200/200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for joining the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic without gasket, it is durable and tight in joints.

Corrugated (structural) Elbow K2-Kan with diameter fi 1000mm angle 30 degrees, single-hull, with Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange < span>Mis intended for the construction of sanitary and non-sewage sewer. The knee is made of the highest quality plastic with one cup without gasket, it is durable and tight in joints.

A corrugated (structural) K2-Kan with a diameter of fi 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The cap is made of the highest quality plastic without gaskets, is durable and tight in joints.

The K2-Kan corrugated (structural) coupling with a diameter of fi 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic without gaskets, is durable and tight in joints.

Corrugated Tee (structural) K2-Kan with a diameter of 200/160mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.

Corrugated Tee (structural) K2-Kan with a diameter of 200/160mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.

Corrugated Tee (structural) K2-Kan with a diameter of 200/160mm angle 90 degrees, with a departure to the smooth pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary and general sewage. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.

Corrugated Tee (structural) K2-Kan with a diameter of 200/160mm angle 45 degrees, with a departure to the smooth pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary and general sewage. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.