Pass-through sewer with PP K2

Sewer System

External corrugated sewer with PP K2-Kan is designed for plumbing and sewer systems. The system is based on orange pipes and fittings in diameters from fi 110mm to fi 2400mm. Durability and usability make our products widely used in residential and general construction.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

K2-canalization pipe with PP
Flow pipes
Perforated SN8
Perforated pipes
OD-Form Fittings
OD-Form Fittings
K2-Kan outer form fittings with PP
ID-Form Fittings

Active filters

Corrugated (structural) elbow with PP DN 400 angle 15 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 400 angle 15 degree
Corrugated (structural) Elbow K2-Kan with diameter fi 400mm angle 15 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Corrugated (structural) elbow with PP DN 400 Angle 30 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 400 Angle 30 degree
Corrugated (structural) Elbow K2-Kan with diameter fi 400mm angle 30 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Corrugated (structural) knee with PP DN 400 angle 45 degrees
Out-of-Stock
Corrugated (structural) knee with PP DN 400 angle 45 degrees
Corrugated (structural) Elbow K2-Kan with diameter fi 400mm angle 45 degrees, double-edging, with Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, it is designed for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Corrugated (structural) knee with PP DN 400 angle 90 degrees
Out-of-Stock
Corrugated (structural) knee with PP DN 400 angle 90 degrees
Corrugated (structural) Elbow K2-Kan with diameter fi 400mm angle 90 degrees, double-edging, with Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, it is designed for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Crimed coupling (structural) with PP DN 400mm
Out-of-Stock
Crimed coupling (structural) with PP DN 400mm
Corrugated (structural) coupling K2-Kan with a diameter of fi 400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and general sewer. The coupling is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Corrugated (structural) cap with PP DN 400mm
Out-of-Stock
Corrugated (structural) cap with PP DN 400mm
A corrugated (structural) K2-Kan with a diameter of fi 400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The cap is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Crimed Cork (structural) with PP DN 400mm
Out-of-Stock
Crimed Cork (structural) with PP DN 400mm
Crimped Cork (Universal) K2-Kan with a diameter of fi 400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for sealing the ends of sewage systems in sanitary construction and Combined. Cork made of the highest quality plastic without gasket, is sturdy and sealed in joints.
Details View details  
GASKET PP CORED Pipe DN 400mm
Out-of-Stock
GASKET PP CORED Pipe DN 400mm
GASKET for the (corrugated) pass pipe K2-Kan with a diameter of fi 400mm, double-lip, with the Polish standard PN-EN 13476-3, in Black, is designed for watertight joining of pass pipes in the construction of sanitary and general sewer. Gasket made of the highest quality plastics, it is durable and tight in joints.
Details View details  
Pass-through pipe (double-walled) PP DN 400x3000mm
Out-of-Stock
Pass-through pipe PP SN8 DN/OD 400x3000mm
Corrugated pipe (structural) with an external diameter fi 400mm with a length of 3 meters, with the Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy-duty type SN 8, in Orange, is designed for the construction of sanitary and universal sewer. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Details View details  
Pass-through pipe PP SN8 DN/OD 400x6000mm
Out-of-Stock
Pass-through pipe PP SN8 DN/OD 400x6000mm
Corrugated pipe (structural) with an external diameter fi 400mm with a length of 6 meters, with the Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy-duty type SN 8, in Orange, is designed for the construction of sanitary and universal sewer. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Details View details  
Plain pipe coupling with PP DN 400mm
Out-of-Stock
Plain pipe coupling with PP DN 400mm
The coupling (ring with gasket) with the entrance to the smooth PVC pipe with a diameter of DN 400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
PVC Cup coupling with PP DN 400mm
Out-of-Stock
PVC Cup coupling with PP DN 400mm
The PVC Cup coupling with the entrance to a PVC smooth pipe with a diameter of DN 400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary and general sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
GASKET with PP DN 400mm
Out-of-Stock
GASKET with PP DN 400mm
Gasket with entrance to PVC smooth pipe with DN 400mm diameter, with Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, it is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Connector with PP DN 400mm
Out-of-Stock
Connector with PP DN 400mm
The coupling with the entrance to the smooth PVC pipe with a diameter of DN 400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary and general sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Cap with PP DN 400mm
Out-of-Stock
Cap with PP DN 400mm
The cap with the entrance to the smooth PVC pipe with a diameter of DN 400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Knee with PP DN 400 angle 15
Out-of-Stock
Knee with PP DN 400 angle 15
Pass-through elbow with a diameter of DN 400mm, Angle 15, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary and general sewer. The fittings are made of high quality plastic with gasket, it is durable and tight in joints.
Details View details  
Knee with PP DN 400 Angle 30
Out-of-Stock
Knee with PP DN 400 Angle 30
Pass-through elbow with a diameter of DN 400mm, Angle 30, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary and general sewer. Made of high quality plastic with gasket, it is durable and tight in joints.
Details View details  
Knee with PP DN 400 angle 45
Out-of-Stock
Knee with PP DN 400 angle 45
Pass-through elbow with a diameter of DN 400mm, Angle 45, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary and general sewer. Made of high quality plastic with gasket, it is durable and tight in joints.
Details View details  
Knee with PP DN 400 angle 87
Out-of-Stock
Knee with PP DN 400 angle 87
Pass-through elbow with a diameter of DN 400mm, Angle 87, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary and general sewer. Made of high quality plastic with gasket, it is durable and tight in joints.
Details View details  
Cork with PP DN 400mm
Out-of-Stock
Cork with PP DN 400mm
Cork with the entrance to the smooth PVC pipe with a diameter of DN 400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Leak-proof passage with PP DN 400mm
Out-of-Stock
Leak-proof passage with PP DN 400mm
The leak-tight passage with the entrance to the smooth PVC pipe with a diameter of DN 400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary and general sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Drain pipe PP DN 400mm TP (360 °) SN8 (6 m section)
Out-of-Stock
Drain pipe PP DN 400mm TP (360 °) SN8 (6 m section)
TP Drain Pipe (360st perforation) fully sown, SN 8 with a diameter of 6mb fi 400mm, with Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas around Airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 400mm LP (220 °) SN8 (6 m section)
Out-of-Stock
Drain pipe PP DN 400mm LP (220 °) SN8 (6 m section)
LP Drain Pipe (220st perforation) semi-tangle, SN 8 diameter fi 400mm with a length of 6MB, with Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas around Airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 400mm MP (120 °) SN8 (6 m section)
Out-of-Stock
Drain pipe PP DN 400mm MP (120 °) SN8 (6 m section)
The MP drain pipe (120st perforation), SN 8 with a diameter of 6mb fi 400mm, with Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas around Airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 400mm MP (120 °) SN8 ID (6 m stretch)
Out-of-Stock
Drain pipe PP DN 400mm MP (120 °) SN8 ID (6 m stretch)
MP Drain Pipe (120st perforation) fully sown, SN 8 ID with diameter fi 400mm with a length of 6MB, with Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas around Airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 400mm LP (220 °) SN8 ID (6 m section)
Out-of-Stock
Drain pipe PP DN 400mm LP (220 °) SN8 ID (6 m section)
LP Drain Pipe (220st perforation) semi-tangle, SN 8 ID with diameter fi 400mm with a length of 6MB, with Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas around Airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 400mm TP (360 °) SN8 ID (6 m section)
Out-of-Stock
Drain pipe PP DN 400mm TP (360 °) SN8 ID (6 m section)
TP Drain Pipe (360st perforation) fully sown, SN 8 ID with diameter fi 400mm with a length of 6MB, with Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas around Airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 400mm TP (360 °) SN8 ID in geotarking (6 m stretch)
Out-of-Stock
Drain pipe PP DN 400mm TP (360 °) SN8 ID in geotarking (6 m stretch)
TP Drain Pipe (360st perforation) fully oozing, SN 8 ID in geotartry with a diameter fi 400mm with a length of 6MB, with the Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas around Industrial areas, airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 400mm LP (220 °) SN8 ID in geotarking (6 m stretch)
Out-of-Stock
Drain pipe PP DN 400mm LP (220 °) SN8 ID in geotarking (6 m stretch)
LP Drain Pipe (220st perforation) partly oozing, SN 8 ID in geotartry with a diameter fi 400mm with a length of 6MB, with the Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas Around industrial sites, airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 400mm MP (120 °) SN8 ID in geotarking (6 m stretch)
Out-of-Stock
Drain pipe PP DN 400mm MP (120 °) SN8 ID in geotarking (6 m stretch)
MP Drain Pipe (120st perforation) fully oozing, SN 8 ID in geotartry with a diameter fi 400mm with a length of 6MB, with the Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is intended for drainage of land and areas around Industrial areas, airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 400mm TP (360 °) SN8 ID in geotarking with elevated perforation (6 m stretch)
Out-of-Stock
Drain pipe PP DN 400mm TP (360 °) SN8 ID in geotarking with elevated perforation (Section 6 m)
TP Drain Pipe (360st perforation) fully oozing, SN 8 ID in geotarking with raised perforation of a diameter of 6mb fi 400mm, with Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is intended for Dewatering of land and areas around industrial sites, airports, roads and motorways and farmlands, etc. Pipes made of high-quality plastics guarantee protection against water in
Details View details