Best sellers

Pipe PEX/AL/PE fi 16x2, 0mm
Multilayer pressure pipe with a diameter of fi 16mm, with a wall of 2, 0mm with a maximum pressure of 1 MPa (10 bar), in a standard length of 200MB, with the Polish standard PN-EN ISO 21003. Made of polyethylene (PEX), aluminium (AL), polyethylene (PE), white, it is intended for installation in systems for the transmission of water for consumption, for economic purposes and in heating systems (CO
Welded elbow PP-R fi 20mm angle 90 degrees
Welded Knee diameter fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
STABI GLASS PP-R/GF fi 20mm pipe
Welded STABI pipe with glass fibre PN-20 with a diameter of fi 20mm, with a wall of 2, 8mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings.  Tub
Welded elbow PP-R fi 25mm angle 90 degrees
Welded Knee diameter fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
STABI GLASS PP-R/GF fi 25mm Tube
STABI pipe welded with glass fibre PN-20 with a diameter of fi 25mm, with a wall of 3, 5mm length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are
Welded PP-R fi 20mm
Welded with a diameter of fi 20mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Holder fi 20mm
The holder fi 20mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating inside the building. The handle made of the highest quality plastic is durable and resistant to heat. 
Welded elbow PP-R fi 32mm angle 90 degrees
Welded Knee diameter fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
PE Pipe HD 80 DN 32x2, 4mm
The pressure pipe PN 10 SDR 13.6 with a diameter of fi 32mm, with a wall of 2, 4mm with a length of 150MB, with the Polish standard PN-EN 13244-2, made of polyethylene (PE HD) in blue, is intended for the transmission of treated drinking water and social-household sewage. Pipes made of the highest quality plastics can be combined with a wide range of pressure fittings.
PodanPrice per metre. Fo
Welded Tee PP-R fi 20mm angle 90 degrees
Welded tee with a diameter of fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Holder fi 25mm
The holder fi 25mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating inside the building. The handle made of the highest quality plastic is durable and resistant to heat. 
Welded PP-R fi 25mm
Welded with a diameter of fi 25mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Sewer Knee fi 50 angle 45 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left"> 
STABI GLASS PP-R/GF fi 32mm Tube
Welded STABI pipe with glass fibre PN-20 with a diameter of fi 32mm, with 4, 4mm wall length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings.  Tubes are shipp
Elbow GW Hanger PP-R fi 20x1/2
Knee hanger with inner thread diameter fi 20x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
with external thread PP-R fi 20x1/2
with external thread diameter fi 20x1/2 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Welded elbow PP-R fi 20mm angle 45 degrees
Welded Knee diameter fi 20mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
PE Pipe HD 80 DN 32x3, 0mm
Pressure Pipe PN 12.5 SDR 11 with a diameter of fi 32mm, with a wall of 3, 0mm with a length of 150MB, with the Polish standard PN-EN 13244-2, made of polyethylene (PE HD) in blue, is intended for the transmission of treated drinking water and social-household sewage. Pipes made of the highest quality plastics can be combined with a wide range of pressure fittings.
PodanPrice per metre. For wh
Sewer Knee fi 50 angle 67 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left"> 
Welded pipe PP-R PN-20 fi 20mm
Welded pipe PPR PN-20 SDR-6 with a diameter of fi 20mm, with a wall of 3, 4mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and a central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
T
Sewer Knee fi 50 angle 90 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
STABI GLASS PP-R/GF fi 50mm pipe
STABI pipe welded with glass fibre PN-20 with a diameter of fi 50mm, with a wall of 6, 9mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Welded elbow PP-R fi 40mm angle 90 degrees
Welded knee diameter fi 40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Sewer Knee fi 50 angle 30 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 30 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Welded nylon PP-R fi 20mm angle 90 degrees
Welded nipple with a diameter of fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
PE Pipe HD 80 DN 20x 2.0 mm
Pressure Pipe PN 12.5 SDR 11 with a diameter of fi 20mm, with a wall of 2, 0mm with a length of 150MB, with the Polish standard PN-EN 13244-2, made of polyethylene (PE HD) in blue, is intended for the transmission of treated drinking water and social-household sewage. Pipes made of the highest quality plastics can be combined with a wide range of pressure fittings.
PodanPrice per metre. For wh
Welded Tee PP-R fi 25mm angle 90 degrees
Welded tee with a diameter of fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded pipe PP-R PN-20 fi 50mm
Welded pipe PPR PN-20 SDR-6 with a diameter of fi 50mm, with a wall of 8, 3mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tub
Welded PP-R fi 32mm
Welded with a diameter of fi 32mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Sewer Knee fi 110 angle 45 degrees
The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.