Flange PP-Steel PE100 PN 10 fi 20/25mm
Out-of-Stock
Flange PP-Steel PE100 PN 10 fi 20/25mm
PP-Steel Flange PE100 PN 10 SDR 17 with a diameter of 20/25mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Loose galvanised flange PE100 PN 10 fi 20/25mm
Out-of-Stock
Loose galvanised flange PE100 PN 10 fi 20/25mm
Loose galvanised Flange PE100 PN 10 SDR 17 with a diameter of fi 20/25mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Special Flange sleeve PE100 PN 10 fi 65/90mm
Out-of-Stock
Special Flange sleeve PE100 PN 10 fi 65/90mm
Special Flange sleeve PE100 PN 10 SDR 17 with a diameter of 65/90mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Flange bushing PE100 PN 10 fi 50mm
Out-of-Stock
Flange bushing PE100 PN 10 fi 50mm
Flange sleeve PE100 PN 10 SDR 17 with a diameter of fi 50mm with standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Reduction PE100 PN 10 fi 50/32mm
Out-of-Stock
Reduction PE100 PN 10 fi 50/32mm
Reduction of PE100 PN 10 SDR 17 with a diameter of fi 50/32mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Parallel tee PE100 PN 10 fi 63mm
Out-of-Stock
Parallel tee PE100 PN 10 fi 63mm
The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 63mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Parallel tee PE100 PN 10 fi 63mm Angle 45 °
Out-of-Stock
Parallel tee PE100 PN 10 fi 63mm Angle 45 °
The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 63mm, an angle of 45 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Cap (cover cap) PE100 PN 10 fi 50mm
Out-of-Stock
Cap (cover cap) PE100 PN 10 fi 50mm
Cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 50mm with standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Reducer Tee PE100 PN 10 fi 63/50mm
Out-of-Stock
Reducer Tee PE100 PN 10 fi 63/50mm
Reducing tee PE100 PN 10 SDR 17 with a diameter of fi 63/50mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 63 Angle 90 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 63 Angle 90 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 63 angle 60 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 63 angle 60 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, angle 60 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 63 angle 45 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 63 angle 45 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 63 Angle 30 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 63 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 63 Angle 22 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 63 Angle 22 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, angle 22 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 63 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 63 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 10 fi 63 Angle 90 °
Out-of-Stock
Butt elbow Long PE100 PN 10 fi 63 Angle 90 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 63mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 10 fi 90 Angle 30 °
Out-of-Stock
Butt elbow Long PE100 PN 10 fi 90 Angle 30 °
Butt elbow Long PE 100 PN 10 SDR 17 with diameter fi 90mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 10 fi 90 Angle 15 °
Out-of-Stock
Butt elbow Long PE100 PN 10 fi 90 Angle 15 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 90mm, an angle of 15 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 10 fi 63 angle 45 °
Out-of-Stock
Butt elbow Long PE100 PN 10 fi 63 angle 45 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 63mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Loose galvanised flange PE100 PN 10 fi 25/32mm
Out-of-Stock
Loose galvanised flange PE100 PN 10 fi 25/32mm
Loose galvanised Flange PE100 PN 10 SDR 17 with a diameter of fi 25/32mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Flange PP-Steel PE100 PN 10 fi 25/32mm
Out-of-Stock
Flange PP-Steel PE100 PN 10 fi 25/32mm
PP-Steel Flange PE100 PN 10 SDR 17 with a diameter of fi 25/32mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Special Flange sleeve PE100 PN 10 fi 80/110mm
Out-of-Stock
Special Flange sleeve PE100 PN 10 fi 80/110mm
Special Flange sleeve PE100 PN 10 SDR 17 with a diameter of FI 80/110mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 10 fi 90 Angle 30 °
Out-of-Stock
Butt elbow Long PE100 PN 10 fi 110 Angle 15 °
Butt elbow Long PE 100 PN 10 SDR 17 with a diameter of fi 110mm, angle of 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 10 fi 90 Angle 30 °
Out-of-Stock
Butt elbow Long PE100 PN 10 fi 110 Angle 30 °
Butt elbow Long PE 100 PN 10 SDR 17 with diameter fi 110mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Flange bushing PE100 PN 10 fi 63mm
Out-of-Stock
Flange bushing PE100 PN 10 fi 63mm
Flange sleeve PE100 PN 10 SDR 17 with a diameter of fi 63mm with standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Reduction PE100 PN 10 fi 50/32mm
Out-of-Stock
Reduction PE100 PN 10 fi 50/40mm
The reduction of PE100 PN 10 SDR 17 with a diameter of fi 50/40mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Cap (cover cap) PE100 PN 10 fi 50mm
Out-of-Stock
Cap (cover cap) PE100 PN 10 fi 63mm
The cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 63mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Parallel tee PE100 PN 10 fi 75mm Angle 45 °
Out-of-Stock
Parallel tee PE100 PN 10 fi 75mm Angle 45 °
The parallel tee PE100 PN 10 SDR 17 with a diameter of 75mm, an angle of 45 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Reducer Tee PE100 PN 10 fi 90/50mm
Out-of-Stock
Reducer Tee PE100 PN 10 fi 90/50mm
Reducing tee PE100 PN 10 SDR 17 with a diameter of fi 90/50mm with standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Parallel tee PE100 PN 10 fi 75mm
Out-of-Stock
Parallel tee PE100 PN 10 fi 75mm
The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 75mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 75 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 75 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of 75mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 75 Angle 22 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 75 Angle 22 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of 75mm, 22 degrees with EN 1555 standard, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 75 Angle 30 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 75 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of 75mm, an angle of 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 75 Angle 45 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 75 Angle 45 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of 75mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 75 Angle 60 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 75 Angle 60 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of 75mm, angle 60 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 75 Angle 90 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 75 Angle 90 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of 75mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details