Welded Fittings PP-RCT

Welded PP-RCT fittings are designed for indoor installation. The system is based on grey or white fittings in diameters from fi 16mm to fi 40mm. Durability and usability make these products widely used in residential and general construction.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

Knee
Knee-length Knees
GW Knee
Elbow GZ
GW Knee Hanger
Tees
Reducers
GW Tees
GZ Tees
Mufy
Reductive
GW
GZ
Caps
Welded elbow PP-RCT fi 20mm angle 45 degrees
Out-of-Stock
Welded elbow PP-RCT fi 20mm angle 45 degrees
Welded knee PP-RCT diameter fi 20mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded nipple, PP-RCT fi 20mm angle 45 degrees
Out-of-Stock
Welded nipple, PP-RCT fi 20mm angle 45 degrees
Welded PP-RCT with a diameter of fi 20mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Elbow with internal thread PP-RCT fi 20x1/2 "
Out-of-Stock
Elbow with internal thread PP-RCT fi 20x1/2
Elbow with internal thread PP-RCT diameter fi 20x1/2 ", angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for the installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Elbow with external thread PP-RCT fi 20x1/2 "mm
Out-of-Stock
Elbow with external thread PP-RCT fi 20x1/2
Elbow with external thread PP-RCT diameter fi 20x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Elbow GW Hanger PP-RCT fi 20x1/2 "mm
Out-of-Stock
Elbow GW Hanger PP-RCT fi 20x1/2
Knee hanger with internal thread PP-RCT diameter fi 20x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for the installation of central heating and transmission of hot water and Cold inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PP-RCT fi 20mm angle 90 degrees
Out-of-Stock
Welded Tee PP-RCT fi 20mm angle 90 degrees
Welded Tee PP-RCT with diameter fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building . The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with internal thread PP-RCT fi 20x1/2 "mm angle 90 degrees
Out-of-Stock
Tee with internal thread PP-RCT fi 20x1/2
Tee with internal thread PP-RCT diameter fi 20x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with external thread PP-RCT fi 20x1/2 "mm angle 90 degrees
Out-of-Stock
Tee with external thread PP-RCT fi 20x1/2
The tee with external thread PP-RCT diameter fi 20x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded PP-RCT fi 25mm
Out-of-Stock
Welded PP-RCT fi 25mm
PP-RCT welded with a diameter of fi 25mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
with internal thread PP-RCT fi 20x1/2 mm
Out-of-Stock
with internal thread PP-RCT fi 20x1/2
with internal thread PP-RCT diameter fi 20x1/2 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Details View details  
with external thread PP-RCT fi 20x1/2 mm
Out-of-Stock
with external thread PP-RCT fi 20x1/2
with external thread PP-RCT diameter fi 20x1/2 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building . The made of the highest quality plastic is durable and resistant to heat. 
Details View details  
PP Plug-RCT fi 20mm
Out-of-Stock
PP Plug-RCT fi 20mm
PP-RCT fi 20mm plug, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant. 
Details View details  
Welded elbow PP-RCT fi 25mm angle 45 degrees
Out-of-Stock
Welded elbow PP-RCT fi 25mm angle 45 degrees
Welded knee PP-RCT diameter fi 25mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PP-RCT fi 32mm angle 45 degrees
Out-of-Stock
Welded elbow PP-RCT fi 32mm angle 45 degrees
Welded knee PP-RCT diameter fi 32mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PP-RCT fi 40mm angle 45 degrees
Out-of-Stock
Welded elbow PP-RCT fi 40mm angle 45 degrees
Welded knee PP-RCT diameter fi 40mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PP-RCT fi 20mm angle 90 degrees
Out-of-Stock
Welded elbow PP-RCT fi 20mm angle 90 degrees
Welded knee PP-RCT diameter fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PP-RCT fi 25mm angle 90 degrees
Out-of-Stock
Welded elbow PP-RCT fi 25mm angle 90 degrees
Welded knee PP-RCT diameter fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PP-RCT fi 32mm angle 90 degrees
Out-of-Stock
Welded elbow PP-RCT fi 32mm angle 90 degrees
Welded knee PP-RCT diameter fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PP-RCT fi 40mm angle 90 degrees
Out-of-Stock
Welded elbow PP-RCT fi 40mm angle 90 degrees
Welded knee PP-RCT diameter fi 40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded nipple, PP-RCT fi 25mm angle 45 degrees
Out-of-Stock
Welded nipple, PP-RCT fi 25mm angle 45 degrees
Welded steel PP-RCT with diameter fi 25mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded nipple, PP-RCT fi 20mm angle 90 degrees
Out-of-Stock
Welded nipple, PP-RCT fi 20mm angle 90 degrees
Welded PP-RCT with a diameter of fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded nipple, PP-RCT fi 25mm angle 90 degrees
Out-of-Stock
Welded nipple, PP-RCT fi 25mm angle 90 degrees
Welded steel PP-RCT with diameter fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded studs PP-RCT fi 32mm angle 90 degrees
Out-of-Stock
Welded studs PP-RCT fi 32mm angle 90 degrees
Welded PP-RCT with a diameter of fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Elbow with internal thread PP-RCT fi 20x3/4 "
Out-of-Stock
Elbow with internal thread PP-RCT fi 20x3/4
Elbow with internal thread PP-RCT diameter fi 20x3/4 ", angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for the installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Elbow with internal thread PP-RCT fi 25x1/2 "
Out-of-Stock
Elbow with internal thread PP-RCT fi 25x1/2
Elbow with internal thread PP-RCT diameter fi 25x1/2 ", angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Elbow with internal thread PP-RCT fi 25x3/4 "
Out-of-Stock
Elbow with internal thread PP-RCT fi 25x3/4
Elbow with internal thread PP-RCT diameter fi 25x3/4 ", angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Elbow with external thread PP-RCT fi 20x3/4 "mm
Out-of-Stock
Elbow with external thread PP-RCT fi 20x3/4
Elbow with external thread PP-RCT diameter fi 20x3/4mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Elbow with external thread PP-RCT fi 25x1/2 "mm
Out-of-Stock
Elbow with external thread PP-RCT fi 25x1/2
Elbow with external thread PP-RCT diameter fi 25x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for the installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Elbow with external thread PP-RCT fi 25x3/4 "mm
Out-of-Stock
Elbow with external thread PP-RCT fi 25x3/4
Elbow with external thread PP-RCT diameter fi 25x3/4mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for the installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Elbow with external thread PP-RCT fi 32x1 "mm
Out-of-Stock
Elbow with external thread PP-RCT fi 32x1
Elbow with external thread PP-RCT, diameter fi 32x1mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Elbow GW Hanger PP-RCT fi 25x1/2 "mm
Out-of-Stock
Elbow GW Hanger PP-RCT fi 25x1/2
Knee hanger with internal thread PP-RCT diameter fi 25x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for the installation of central heating and transmission of hot water and Cold inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PP-RCT fi 25mm angle 90 degrees
Out-of-Stock
Welded Tee PP-RCT fi 25mm angle 90 degrees
Welded Tee PP-RCT with diameter fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building . The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PP-RCT fi 32mm angle 90 degrees
Out-of-Stock
Welded Tee PP-RCT fi 32mm angle 90 degrees
PP-RCT welded tee with a diameter of fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building . The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PP-RCT fi 32mm angle 90 degrees
Out-of-Stock
Welded Tee PP-RCT fi 40mm angle 90 degrees
Welded Tee PP-RCT with diameter fi 40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building . The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with internal thread PP-RCT fi 25x1/2 "mm angle 90 degrees
Out-of-Stock
Tee with internal thread PP-RCT fi 25x1/2
The tee with PP-RCT in diameter fi 25x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
External thread Tee PP-RCT fi 25x1/2 "mm angle 90 degrees
Out-of-Stock
Tee with external thread PP-RCT fi 25x1/2
Male thread with PP-RCT diameter fi 25x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details