Pass-through sewer with PP K2

Sewer System

External corrugated sewer with PP K2-Kan is designed for plumbing and sewer systems. The system is based on orange pipes and fittings in diameters from fi 110mm to fi 2400mm. Durability and usability make our products widely used in residential and general construction.

Out-of-Stock
Flake Tee (structural) with PP DN 160/160 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 160/160mm, angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Out-of-Stock
Corrugated (structural) elbow with PP DN 160 angle 15 Degree
Corrugated (structural) Elbow K2-Kan with a diameter of 15 degrees fi 160mm, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and non-float sewer. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Out-of-Stock
Pass pipe (double-walled) PP DN/ID 200x6000mm
Corrugated pipe (structural) with an internal diameter of fi 200mm with a length of 6 meters, with the Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy-duty type SN 8, in Orange, is designed for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Out-of-Stock
PE Culvert Pipe SN8 DN 350x6000mm
Corrugated pipe (structural) XXL with an inner diameter of fi 350mm with a length of 6 meters, with the Polish standard PN-EN 13476-3, made of polyethylene (PE), heavy type SN 8, in black, is designed for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Out-of-Stock
Pass-through pipe (double-walled) PP DN 250x3000mm
Corrugated pipe (structural) without a glass of K2-Kan with an internal diameter of fi 250mm with a length of 3 meters, with Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy type SN 10, in Orange, is intended for the construction of sanitary sewer and Nationwide. Pipes made of the highest quality plastic with gasket consist of two sturdy layers in this single corrugated.
Out-of-Stock
Pass-through pipe PP SN10 DN/OD 160x6000mm
Corrugated pipe (structural) with an inner diameter of fi 160mm with a length of 6 meters, with the Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy-duty type SN 10, in Orange, is designed for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Out-of-Stock
Pass-through pipe (double walled) PP SN 16 DN/ID 200x6000mm
Corrugated pipe (structural) with an internal diameter of fi 200mm with a length of 6 meters, with the Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy type SN 16, in Orange, is designed for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Out-of-Stock
Pass-through pipe (double walled) PP SN 12 DN/ID 200x6000mm
Corrugated pipe (structural) with an internal diameter of fi 200mm with a length of 6 meters, with the Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy type SN 12, in Orange, is designed for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Out-of-Stock
Fifth Wheel connection with PP DN 315/160
The saddle connection with the entrance to the smooth PVC pipe with a diameter of DN 315/160, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Out-of-Stock
Leak-proof transition from PP DN 200mm
The passage sealed with the entrance to the smooth PVC pipe with a diameter of DN 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Out-of-Stock
Cork with PP DN 200mm
Cork with the entrance to the smooth PVC pipe with a diameter of DN 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Out-of-Stock
Reduction from PP DN 250/200
The reduction from the entrance to the smooth PVC pipe with a diameter of DN 250/200, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the flow pipes in the construction of sanitary and general sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Out-of-Stock
Tee with PP DN 200 angle 90
The tee with the entrance to the smooth PVC pipe with a diameter DN 200mm angle 90, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Out-of-Stock
Tee with PP DN 200/160 Angle 45
The tee with the entrance to the smooth PVC pipe with a diameter of DN 200/160mm The angle of 45, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Out-of-Stock
Knee with PP DN 160 angle 30
Pass-through elbow with a diameter of DN 160mm, Angle 30, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the flow pipes in the construction of sanitary and general sewer. Made of high quality plastic with gasket, it is durable and tight in joints.
Out-of-Stock
Cap with PP DN 200mm
The cap with the entrance to the smooth PVC pipe with a diameter of DN 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Out-of-Stock
Coupling with PP DN 200mm
The coupling with the entrance to the smooth PVC pipe with a diameter of DN 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Out-of-Stock
"In situ" four-lip gasket PP DN 160mm
The "in situ" four-lip gasket with the entrance to the smooth PVC pipe with a diameter of DN 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for joining the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Out-of-Stock
GASKET with PP DN 200mm
The gasket with the entrance to the smooth PVC pipe with a diameter of DN 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Out-of-Stock
PVC Cup coupling with PP DN 200mm
The PVC Cup coupling with the entrance to the smooth PVC pipe with a diameter of DN 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the flow pipes in the construction of sanitary and general sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Out-of-Stock
Plain pipe coupling with PP DN 200mm
The coupling (ring with gasket) with the entrance to the smooth PVC pipe with a diameter of DN 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Out-of-Stock
Pass-through pipe PP SN8 DN/OD 160x6000mm
Corrugated pipe (structural) with an external diameter fi 160mm with a length of 6 meters, with the Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy type SN 8, in Orange, is intended for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Out-of-Stock
Pass-through pipe (double-walled) PP DN 250x6000mm
Corrugated pipe (structural) without a glass of K2-Kan with an internal diameter of fi 250mm with a length of 6 meters, with Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy type SN 8, in Orange, is intended for the construction of sanitary sewer and Combined. Pipes made of the highest quality plastic with gasket consist of two sturdy layers in this single corrugated.
Out-of-Stock
Pass-through pipe (double wall) PP SN 10 DN/ID 200x6000mm
Corrugated pipe (structural) with an internal diameter of fi 200mm with a length of 6 meters, with the Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy type SN 10, in Orange, is designed for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Out-of-Stock
GASKET PP CORED Pipe DN 200mm
A seal for the (corrugated) pass pipe K2-Kan with a diameter of fi 200mm, double-lip, with the Polish standard PN-EN 13476-3, in Black, is designed for watertight joining of the pass pipes in the construction of sanitary and general sewer. Gasket made of the highest quality plastics, it is durable and tight in joints.
Out-of-Stock
Fifth Wheel connection with PP DN 300-160mm
The K2-Kan saddle connection, with a diameter of 300-160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the connection of mechanical pipes in the construction of sanitary and non-sewage sewer. The connection made of the highest quality plastic with gasket, is durable and tight in joints.
Out-of-Stock
Crimed Cork (internal) with PP DN 1000mm
Crimped Cork (inner to cup) K2-Kan with a diameter of fi 1000mm, with Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for sealing the ends of sewage systems in sanitary construction and Combined. Cork made of the highest quality plastic without gasket, is sturdy and sealed in joints.
Out-of-Stock
Crimed Cork (external) with PP DN 1000mm
Crimped Cork (external) K2-Kan with a diameter of fi 1000mm, with Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for sealing the ends of sewage systems in sanitary construction and Combined. Cork made of the highest quality plastic without gasket, is sturdy and sealed in joints.
Out-of-Stock
Crimed Cork (structural) with PP DN 200mm
Crimped Cork (Universal) K2-Kan with a diameter of fi 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for sealing the ends of sewage systems in sanitary construction and Combined. Cork made of the highest quality plastic without gasket, is sturdy and sealed in joints.
Out-of-Stock
Transition tight Corrugated (structural) with PP DN 200mm
The passage of a tight corrugated (structural) K2-Kan with internal diameter fi 200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for a sealed connection of any type of sewer pipe, with Concrete wells. The transition made of the highest quality plastics without gasket, is durable and tight in joints.
Out-of-Stock
Corrugated (structural) Reduction K2-Kan BK with PP DN 300/200mm
The corrugated (structural) reduction of K2-Kan BK with a diameter of fi 300/200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the flow pipes in the construction of sanitary and general sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  
Out-of-Stock
Crimper nipple (with PVC Cup) with PP DN 200/200mm
Corrugated (structural) coupling with the entrance to the smooth pipe with a cup of PVC K2-Kan with a diameter of fi 200/200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction Sanitary sewer system. The coupling is made of the highest quality plastic without gasket, it is durable and tight in joints.
Out-of-Stock
Crimper Nipple (for PVC Cup) with PP DN 200/200mm
Corrugated (structural) coupling with the entry into the cup of PVC K2-Kan with a diameter of fi 200/200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for joining the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic without gasket, it is durable and tight in joints.