Pass-through sewer with PP K2

Sewer System

External corrugated sewer with PP K2-Kan is designed for plumbing and sewer systems. The system is based on orange pipes and fittings in diameters from fi 110mm to fi 2400mm. Durability and usability make our products widely used in residential and general construction.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

K2-canalization pipe with PP
Flow pipes
Perforated SN8
Perforated pipes
OD-Form Fittings
OD-Form Fittings
K2-Kan outer form fittings with PP
ID-Form Fittings
Knee with PP DN 500 angle 30
Out-of-Stock
Knee with PP DN 500 angle 30
Pass-through elbow with a diameter of DN 500mm, Angle 30, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. Made of high quality plastic with gasket, it is durable and tight in joints.
Details View details  
Flake Tee (structural) with PP DN 1000/300 angle 90 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 1000/300 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 1000/300mm angle 90 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake Tee (structural) with PP DN 800/300 angle 45 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 800/300 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 800/300mm angle 45 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Corrugated (structural) elbow with PP DN 500 angle 15 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 500 angle 15 degree
Corrugated (structural) Elbow K2-Kan with a diameter of 15 degrees fi 500mm, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and non-float sewer. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Knee with PP DN 500 angle 45
Out-of-Stock
Knee with PP DN 500 angle 45
Pass-through elbow with a diameter of DN 500mm 45 angle, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary and general sewer. Made of high quality plastic with gasket, it is durable and tight in joints.
Details View details  
Flake Tee (structural) with PP DN 1000/300 angle 45 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 1000/300 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 1000/300mm angle 45 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Corrugated (structural) elbow with PP DN 500 angle 30 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 500 angle 30 degree
Corrugated (structural) Elbow K2-Kan with diameter fi 500mm angle 30 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Knee with PP DN 500 angle 87
Out-of-Stock
Knee with PP DN 500 angle 87
Pass-through elbow with a diameter of DN 500mm 87 angle, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary and general sewer. Made of high quality plastic with gasket, it is durable and tight in joints.
Details View details  
Corrugated (structural) knee with PP DN 500 angle 45 degrees
Out-of-Stock
Corrugated (structural) knee with PP DN 500 angle 45 degrees
Corrugated (structural) Elbow K2-Kan with a diameter of fi 500mm angle 45 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Knee with PP DN 630 angle 15
Out-of-Stock
Knee with PP DN 630 angle 15
Pass-through elbow with a diameter of DN 630mm, Angle 15, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the flow pipes in the construction of sanitary and general sewer. Made of high quality plastic with gasket, it is durable and tight in joints.
Details View details  
Corrugated (structural) knee with PP DN 500 angle 90 degrees
Out-of-Stock
Corrugated (structural) knee with PP DN 500 angle 90 degrees
Corrugated (structural) Elbow K2-Kan with a diameter of fi 500mm angle 90 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Knee with PP DN 630 angle 30
Out-of-Stock
Knee with PP DN 630 angle 30
Pass-through elbow with a diameter of DN 630mm, Angle 30, with Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the flow pipes in the construction of sanitary and general sewer. Made of high quality plastic with gasket, it is durable and tight in joints.
Details View details  
Corrugated (structural) elbow with PP DN 600 Angle 15 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 600 Angle 15 degree
Corrugated (structural) Elbow K2-Kan with a diameter of 15 degrees fi 600mm, the double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and non-float sewer. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Knee with PP DN 630 angle 45
Out-of-Stock
Knee with PP DN 630 angle 45
Pass-through elbow with a diameter of DN 630mm 45 angle, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the flow pipes in the construction of sanitary and general sewer. The fittings are made of high quality plastic with gasket, it is durable and tight in joints.
Details View details  
Corrugated (structural) elbow with PP DN 600 Angle 30 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 600 Angle 30 degree
Corrugated (structural) Elbow K2-Kan with a diameter of fi 600mm, the angle of 30 degrees, the double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and non-float sewer. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Knee with PP DN 630 angle 87
Out-of-Stock
Knee with PP DN 630 angle 87
A pass-through elbow with a diameter of DN 630mm 87 angle, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the flow pipes in the construction of sanitary and general sewer. The fittings are made of high quality plastic with gasket, it is durable and tight in joints.
Details View details  
Corrugated (structural) Knee with PP DN 600 angle 45 degrees
Out-of-Stock
Corrugated (structural) Knee with PP DN 600 angle 45 degrees
Corrugated (structural) Elbow K2-Kan with a diameter of fi 600mm angle 45 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Corrugated (structural) Knee with PP DN 600 angle 90 degrees
Out-of-Stock
Corrugated (structural) Knee with PP DN 600 angle 90 degrees
Corrugated (structural) Elbow K2-Kan with a diameter of fi 600mm angle 90 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Corrugated (structural) elbow with PP DN 800 angle 15 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 800 angle 15 degree
Corrugated (structural) Elbow K2-Kan with a diameter of 15 degrees fi 800mm, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Corrugated (structural) elbow with PP DN 800 angle 30 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 800 angle 30 degree
Corrugated (structural) Elbow K2-Kan with a diameter of 30 degrees fi 800mm, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and non-float sewer. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Corrugated (structural) Knee with PP DN 800 angle 45 degrees
Out-of-Stock
Corrugated (structural) Knee with PP DN 800 angle 45 degrees
Corrugated (structural) Elbow K2-Kan with a diameter of fi 800mm angle 45 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewer. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Corrugated (structural) Knee with PP DN 800 angle 90 degrees
Out-of-Stock
Corrugated (structural) Knee with PP DN 800 angle 90 degrees
Corrugated (structural) Elbow K2-Kan with a diameter of fi 800mm angle 90 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewer. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Flake Tee (structural) with PP DN 400/400 angle 90 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 400/400 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 400/400mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Saddle 90 degrees with PP DN 250-200mm
Out-of-Stock
Saddle 90 degrees with PP DN 250-200mm
Saddle K2-Kan with a diameter of 250-200mm, angle of 90 degrees, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the connection of mechanical pipes in the construction of sanitary and universal sewer. The saddle made of the highest quality plastic with gasket, is durable and tight in joints.
Details View details  
Saddle 90 degrees with PP DN 300-200mm
Out-of-Stock
Saddle 90 degrees with PP DN 300-200mm
Saddle K2-Kan with a diameter of 300-200mm, angle of 90 degrees, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the connection of mechanical pipes in the construction of sanitary and universal sewer. The saddle made of the highest quality plastic with gasket, is durable and tight in joints.
Details View details  
Saddle 90 degrees with PP DN 400-200mm
Out-of-Stock
Saddle 90 degrees with PP DN 400-200mm
Saddle K2-Kan with a diameter of 400-200mm, angle of 90 degrees, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the connection of mechanical pipes in the construction of sanitary and universal sewer. The saddle made of the highest quality plastic with gasket, is durable and tight in joints.
Details View details  
Saddle 90 degrees with PP DN 500-200mm
Out-of-Stock
Saddle 90 degrees with PP DN 500-200mm
Saddle K2-Kan with a diameter of 500-200mm, angle of 90 degrees, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the connection of mechanical pipes in the construction of sanitary and universal sewer. The saddle made of the highest quality plastic with gasket, is durable and tight in joints.
Details View details  
Hole Cutter DN 160/177mm
Out-of-Stock
Hole Cutter DN 160/177mm
The hole cutter 160/177mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the fifth-wheel connection with PP in the construction of sanitary and general sewage. The cutter is made of the highest quality plastic, it is sturdy and sealed in joints.
Details View details  
Hole Cutter DN 200/214, 5mm
Out-of-Stock
Hole Cutter DN 200/214, 5mm
The cutter for hole diameters 200/214, 5mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the fifth-wheel connection with PP in the construction of sanitary and general sewage. The cutter is made of the highest quality plastic, it is sturdy and sealed in joints.
Details View details