Pass-through sewer with PP K2

Sewer System

External corrugated sewer with PP K2-Kan is designed for plumbing and sewer systems. The system is based on orange pipes and fittings in diameters from fi 110mm to fi 2400mm. Durability and usability make our products widely used in residential and general construction.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

K2-canalization pipe with PP
Flow pipes
Perforated SN8
Perforated pipes
OD-Form Fittings
OD-Form Fittings
K2-Kan outer form fittings with PP
ID-Form Fittings

Active filters

Corrugated (structural) elbow with PP DN 160 angle 15 Degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 160 angle 15 Degree
Corrugated (structural) Elbow K2-Kan with a diameter of 15 degrees fi 160mm, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and non-float sewer. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Corrugated (structural) elbow with PP DN 160 Angle 30 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 160 Angle 30 degree
The K2-Kan corrugated (structural) elbow is a diameter of 30 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and non-float sewer. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Corrugated (structural) knee with PP DN 160 angle 45 degrees
Out-of-Stock
Corrugated (structural) knee with PP DN 160 angle 45 degrees
Corrugated (structural) Elbow K2-Kan with a diameter of fi 160mm angle 45 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Corrugated (structural) knee with PP DN 160 angle 90 degrees
Out-of-Stock
Corrugated (structural) knee with PP DN 160 angle 90 degrees
Corrugated (structural) Elbow K2-Kan with a diameter of fi 160mm angle 90 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Crimed coupling (structural) with PP DN 160mm
Out-of-Stock
Crimed coupling (structural) with PP DN 160mm
The K2-Kan corrugated (structural) coupling with a diameter of fi 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Corrugated (structural) cap with PP DN 160mm
Out-of-Stock
Corrugated (structural) cap with PP DN 160mm
The K2-Kan corrugated (structural) cap with a diameter of fi 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The cap is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Crimed Cork (structural) with PP DN 160mm
Out-of-Stock
Crimed Cork (structural) with PP DN 160mm
Crimped Cork (Universal) K2-Kan with a diameter of fi 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for sealing the ends of sewage systems in sanitary construction and Combined. Cork made of the highest quality plastic without gasket, is sturdy and sealed in joints.
Details View details  
GASKET PP CORED Pipe DN 160mm
Out-of-Stock
GASKET PP CORED Pipe DN 160mm
A seal for the (corrugated) flow pipe K2-Kan with a diameter of fi 160mm, double-lip, with the Polish standard PN-EN 13476-3, in black, is intended for the watertight joining of the pass pipes in the construction of sanitary and general sewer. Gasket made of the highest quality plastics, it is durable and tight in joints.
Details View details  
Pass-through pipe PP SN8 DN/OD 160x3000mm
Out-of-Stock
Pass-through pipe PP SN8 DN/OD 160x3000mm
Corrugated (structural) pipe with an external diameter of 3 meters, with the Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy-duty type SN 8, in orange, it is designed for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Details View details  
Pass-through pipe PP SN8 DN/OD 160x6000mm
Out-of-Stock
Pass-through pipe PP SN8 DN/OD 160x6000mm
Corrugated pipe (structural) with an external diameter fi 160mm with a length of 6 meters, with the Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy type SN 8, in Orange, is intended for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Details View details  
Plain pipe coupling with PP DN 160mm
Out-of-Stock
Plain pipe coupling with PP DN 160mm
The coupling (ring with gasket) with the entrance to the smooth PVC pipe with a diameter of DN 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
PVC Cup coupling with PP DN 160mm
Out-of-Stock
PVC Cup coupling with PP DN 160mm
The PVC Cup coupling with the entrance to the smooth PVC pipe with a diameter of DN 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the flow pipes in the construction of sanitary and general sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
GASKET with PP DN 160mm
Out-of-Stock
GASKET with PP DN 160mm
The gasket with the entrance to the smooth PVC pipe with a diameter of DN 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Coupling z PP DN 160mm
Out-of-Stock
Coupling z PP DN 160mm
The coupling with the entrance to the smooth PVC pipe with a diameter of DN 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Cap with PP DN 160mm
Out-of-Stock
Cap with PP DN 160mm
The cap with the entrance to the smooth PVC pipe with a diameter of DN 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Tee with PP DN 160 angle 45
Out-of-Stock
Tee with PP DN 160 angle 45
The tee with the entrance to the smooth PVC pipe with a diameter of DN 160mm 45 angle, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Knee with PP DN 160 angle 15
Out-of-Stock
Knee with PP DN 160 angle 15
Pass-through elbow with a diameter of DN 160mm, Angle 15, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the flow pipes in the construction of sanitary and general sewer. Made of high quality plastic with gasket, it is durable and tight in joints.
Details View details  
Tee with PP DN 160 Angle 90
Out-of-Stock
Tee with PP DN 160 Angle 90
The tee with the entrance to the smooth PVC pipe with a diameter of DN 160mm 90 angle, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Cork with PP DN 160mm
Out-of-Stock
Cork with PP DN 160mm
Cork with the entrance to the smooth PVC pipe with a diameter of DN 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Leak-proof passage with PP DN 160mm
Out-of-Stock
Leak-proof passage with PP DN 160mm
The leak-tight passage with the entrance to the smooth PVC pipe with a diameter of DN 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary and general sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
"In situ" four-lip gasket PP DN 160mm
Out-of-Stock
"In situ" four-lip gasket PP DN 160mm
The "in situ" four-lip gasket with the entrance to the smooth PVC pipe with a diameter of DN 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for joining the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Details View details  
Knee with PP DN 160 angle 30
Out-of-Stock
Knee with PP DN 160 angle 30
Pass-through elbow with a diameter of DN 160mm, Angle 30, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the flow pipes in the construction of sanitary and general sewer. Made of high quality plastic with gasket, it is durable and tight in joints.
Details View details  
Knee with PP DN 160 angle 45
Out-of-Stock
Knee with PP DN 160 angle 45
A pass-through elbow with a diameter of DN 160mm 45 angle, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary and general sewer. Made of high quality plastic with gasket, it is durable and tight in joints.
Details View details  
Pass-through pipe PP SN8 DN/OD 160x2000mm
Out-of-Stock
Pass-through pipe PP SN8 DN/OD 160x2000mm
Corrugated (structural) pipe with an outside diameter of 2 meters fi 110mm, with Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy-duty type SN 8, in Orange, is designed for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Details View details  
Drain pipe PP DN 160mm LP (220 °) SN8 (6 m section)
Out-of-Stock
Drain pipe PP DN 160mm LP (220 °) SN8 (6 m section)
LP Drain Pipe (220st perforation) semi-tangle, SN 8 with a diameter of 6mb fi 160mm, with the Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas around the sites Airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 160mm MP (120 °) SN8 (6 m stretch)
Out-of-Stock
Drain pipe PP DN 160mm MP (120 °) SN8 (6 m stretch)
MP Drain Pipe (120st perforation) with a length of 6MB, SN 8 with a diameter of 6 mm, with Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas around Airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 160mm MP (120 °) SN8 in Geotarking (6 m stretch)
Out-of-Stock
Drain pipe PP DN 160mm MP (120 °) SN8 in Geotarking (6 m stretch)
The MP drain pipe (120st perforation) fully oozing, SN 8 in a nonwoven geotartry with a diameter of approximately 6mb, with the Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for drainage of land and areas around Industrial areas, airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow
Details View details  
Drain pipe PP DN 160mm LP (220 °) SN8 in Geotarking (6 m stretch)
Out-of-Stock
Drain pipe PP DN 160mm LP (220 °) SN8 in Geotarking (6 m stretch)
LP Drain Pipe (220st perforation) partly oozing, SN 8 in geotartry with a diameter of fi 160mm with a length of 6MB, with the Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas Around industrial sites, airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Drain pipe PP DN 160mm TP (360 °) SN8 in Geotarking (section 6 m)
Out-of-Stock
Drain pipe PP DN 160mm TP (360 °) SN8 in Geotarking (6 m stretch)
TP Drain Pipe (360st perforation) fully oozing, SN 8 in geotartry with a diameter of fi 160mm with a length of 6MB, with the Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas around Industrial areas, airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details