External sewer fittings from fi 110 to fi 800mm

Sewer Fittings

A wide range of external, non-pressurized, PP and PVC sewer fittings with different dimensions and operating parameters for installation of sewage systems, draining of household and commercial sewage. It consists of fittings in diameters up to fi 110mm up to fi 800mm in orange-brown. 

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

External sewer knee with PP from fi 110mm to fi 800mm
Knee
External sewer tees from PP from fi 110mm to fi 800mm
Tees
External sewer sliding muzzle from PP from fi 110mm to fi 800mm
Sliding
with external limiter from PP from fi 110mm to fi 800mm
with Limiter
External sewer reducers from PP from fi 110mm to fi 800mm
Reductions
PP external multi-stage reduction
Multi-stage reduction
PP external sewer plugs from fi 110mm to fi 800mm
Plugs
External sewer plugs with PP
Caps
External sewer cleaning with PP
Controlfix
PP external sewer exhaust from fi 110mm to fi 200mm
Winnowings
External sewer sleeves from PP from fi 110mm to fi 800mm
Protective sleeves
Sewer Exhaust DN 160
Out-of-Stock
Fi 160 Sewer
The sewer system with a diameter of fi 160mm, with the Polish standard AT-06-0602 B, made of polypropylene (PP) in grey, is designed for ventilation systems, mounted in a cup of sewer pipe. The exhaust is made of the highest quality plastic, which removes the duct gases after the building. 
Details View details  
Sewage filler PP DN 110 (external)
PP fi 110 Sewage Filler
The sewer plug with a diameter of fi 110mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to blind the ends of the sewer systems outside the building. The cap is made of the highest quality plastic, durable and resistant to heat.
Details View details  
Sewage Plug DN 110 (external)
Out-of-Stock
Sewer Plug FI 110 - Z
The sewer plug with a diameter of fi 110mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for tight closure of the ends of the sewer systems outside the building. Cork made of the highest quality plastic, it is durable and resistant to heat.
Details View details  
Sewage cleaning-Revision DN 110 (external)
Sewage Cleaning-Fi 110
The sewer cleaner with a diameter of fi 110mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for inspection of the inside of the pipeline, draining the impurities outside the building. The Cleaner with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
with Limiter DN 110 (external)
Out-of-Stock
with Limiter FI 110
The sewer muzzle with a diameter of fi 110mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The with limiter and gasket made of the highest quality plastic, is durable and resistant to heat. 
Details View details  
Sliding DN 110 (external)
Sliding Fi 110
The sewer muzzle with a diameter of fi 110mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The sliding with gasket made of the highest quality plastic, is durable and resistant to heat. 
Details View details  
Multi-stage reduction DN 250/110 (external)
Out-of-Stock
Multi-stage reduction fi 250/110
Multi-stage reduction with a diameter of fi 250/110mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
Details View details  
Sewer reduction DN 160/110 (external)
Sewer reduction fi 160/110
The sewer reduction with a diameter of fi 160/110mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
Details View details  
Sewer Tee DN 110/110 angle 45 degrees (external)
Sewer Tee fi 110/110 angle 45 degrees- Z
The sewer tee with a diameter of fi 110/110mm, an angle of 45 degrees, with the Polish standard PN EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to connect sewer pipes at different angles, draining impurities outside Building. The tee with a cup and gasket made of the highest quality plastics, is durable and resistant to heat. 
Details View details  
Sewer Knee DN 110 Angle 15 degree (external)
Sewer Knee fi 110 Angle 15 degree - Z
The sewer knee with a diameter of fi 110mm, an angle of 15 degrees, with the Polish standard PN EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to connect sewer pipes at different angles, draining impurities outside Building. The knee with a cup and gasket made of the highest quality plastics, is durable and resistant to heat.
Details View details  
Sewage filler PP DN 160 (external)
PP fi 160 Sewage filler
The sewer plug with a diameter of fi 160mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to blind the ends of the sewage systems outside the building. The cap is made of the highest quality plastic, durable and resistant to heat.
Details View details  
Sewage Plug DN 160 (external)
Sewer Plug fi 160
The sewer plug with a diameter of fi 160mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for tight closure of the ends of the sewer systems outside the building. Cork made of the highest quality plastic, it is durable and resistant to heat.
Details View details  
Sewage cleaning-Revision DN 160 (external)
Out-of-Stock
Sewage Cleaning-Fi 160
The sewer cleaner with a diameter of fi 160mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for inspection of the inside of the pipeline, draining the impurities outside the building. The Cleaner with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
with Limiter DN 160 (external)
Out-of-Stock
with limiter fi 160
The sewer muzzle with a diameter of fi 160mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The with limiter and gasket made of the highest quality plastic, is durable and resistant to heat. 
Details View details  
Sliding DN 160 (external)
Sliding Fi 160
The sewer muzzle with a diameter of fi 160mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The sliding with gasket made of the highest quality plastic, is durable and resistant to heat. 
Details View details  
Multi-stage reduction DN 250/160 (external)
Out-of-Stock
Multi-stage reduction fi 250/160
Multi-stage reduction with a diameter of fi 250/160mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
Details View details  
Sewer reduction DN 200/160 (external)
Sewer reduction fi 200/160
The sewer reduction with a diameter of fi 200/160mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
Details View details  
Sewer Tee DN 160/110 angle 45 degrees (external)
Sewer Tee fi 160/110 angle 45 degrees
The sewer tee with a diameter of fi 160/110mm, an angle of 45 degrees, with the Polish standard PN EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to connect sewer pipes at different angles, draining impurities outside Building. The tee with a cup and gasket made of the highest quality plastics, is durable and resistant to heat. 
Details View details  
Sewer Knee DN 110 Angle 30 degree (external)
Sewer Knee fi 110 angle 30 degrees - Z
The sewer knee with a diameter of fi 110mm, an angle of 30 degrees, with the Polish standard PN EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to connect sewer pipes at different angles, draining impurities outside Building. The knee with a cup and gasket made of the highest quality plastics, is durable and resistant to heat.
Details View details  
Sewer Exhaust DN 50
Fi 50 Sewer

The sewer system with a diameter of fi 50mm, with a wall of 1, 8mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for ventilation systems, mounted in a cup of sewer pipe. The exhaust is made of the highest quality plastic, which removes the duct gases after the building. 
Details View details  
Sewage filler PP DN 200 (external)
PP fi 200 Sewage Filler
The sewer plug with a diameter of fi 200mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to blind the ends of the sewer systems outside the building. The cap is made of the highest quality plastic, durable and resistant to heat.
Details View details  
Sewage plug DN 200 (external)
Sewer Plug fi 200
The sewer plug with a diameter of fi 200mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for tight closure of the ends of the sewer systems outside the building. Cork made of the highest quality plastic, it is durable and resistant to heat.
Details View details  
Sewage cleaning-Revision DN 200 (external)
Out-of-Stock
Sewage Cleaning-Fi 200
The sewer cleaner with a diameter of fi 200mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for inspection of the inside of the pipeline, draining the impurities outside the building. The Cleaner with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
with Limiter DN 200 (external)
Out-of-Stock
with limiter FI 200
The sewer muzzle with a diameter of fi 200mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The with limiter and gasket made of the highest quality plastic, is durable and resistant to heat. 
Details View details  
Sliding DN 200 (external)
Sliding Fi 200
The sewer muzzle with a diameter of fi 200mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The sliding with gasket made of the highest quality plastic, is durable and resistant to heat. 
Details View details  
Multi-stage reduction DN 315/160 (external)
Out-of-Stock
Multi-stage reduction fi 315/160
Multi-stage reduction with a diameter of fi 315/160mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
Details View details  
Sewer reduction DN 250/200 (external)
Out-of-Stock
Sewer reduction fi 250/200
The sewer reduction with a diameter of fi 250/200mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
Details View details  
Sewer Tee DN 160/160 angle 45 degrees (external)
Sewer Tee fi 160/160 angle 45 degrees
The sewer tee with a diameter of fi 160/160mm, an angle of 45 degrees, with the Polish standard PN EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to connect sewer pipes at different angles, draining impurities outside Building. The tee with a cup and gasket made of the highest quality plastics, is durable and resistant to heat. 
Details View details  
Sewer Knee DN 110 Angle 45 degree (external)
Sewer Knee fi 110 angle 45 degrees - Z
The sewer knee with a diameter of fi 110mm, an angle of 45 degrees, with the Polish standard PN EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to connect sewer pipes at different angles, draining impurities outside Building. The knee with a cup and gasket made of the highest quality plastics, is durable and resistant to heat.
Details View details  
Sewer Exhaust DN 110
Out-of-Stock
Fi 110 Sewer
The sewer system with a diameter of fi 110mm, with a wall of 2, 7mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for ventilation systems, mounted in a cup of sewer pipe. The exhaust is made of the highest quality plastic, which removes the duct gases after the building. 
Details View details  
Sewage Plug DN 250 (external)
Out-of-Stock
Sewer Plug fi 250
The sewer plug with a diameter of fi 250mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for tight closure of the ends of the sewage systems outside the building. Cork made of the highest quality plastic, it is durable and resistant to heat.
Details View details  
Sewage cleaning-Revision DN 250 (external)
Out-of-Stock
Sewage Cleaning-Fi 250
The sewer cleaner with a diameter of fi 250mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for inspection of the inside of the pipeline, draining the impurities outside the building. The Cleaner with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details