PE HD pressure Pipes and fittings

Pressure System PE

Pipes and fittings made of polyethylene PE HD 80, PE HD 100 and PE HD 100 RC are intended for m.in. For the construction of water networks, sewage networks and for transporting aggressive liquids. Pipes and fittings can be combined with the following methods: Butt welding, welding with electrofusion joints, and by means of clamping fittings.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

PE HD 80 pressure pipes for water mains.
PE HD 80 Tubes
PE HD 100 pressure pipes for water mains.
PE HD 100 Tubes
PE HD 100RC sandwich tubes for piping and sewer pipelines.
PE HD 100RC Tubes
Twisted Fittings PE
Twisted Fittings PE
PE HD 100 pressure fittings for water mains.
Segment PE Fittings
PE HD Butt Fittings
PE HD Butt Fittings
PE HD electrofusion Fittings
PE HD electrofusion Fittings
PE HD Pipe 100 DN 20x2, 0mm
Out-of-Stock
PE HD Pipe 100 DN 20x2, 0mm
The pressure pipe PN 16 SDR 11 with a diameter of fi 20mm, with a wall of 2, 0mm with a length of 150MB, with the Polish standard PN-EN 12201-2, made of polyethylene (PE HD) in blue, is intended for the transmission of treated drinking water and social-household sewage. Pipes made of the highest quality plastics can be combined with a wide range of pressure fittings.
PodanPrice per metre. For
Details View details  
Flange PP-Steel PE100 PN 16 fi 20/25mm
Out-of-Stock
Flange PP-Steel PE100 PN 16 fi 20/25mm
PP-Steel Flange PE100 PN 16 SDR 11 with a diameter of 20/25mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Flange PP-Steel PE100 PN 10 fi 20/25mm
Out-of-Stock
Flange PP-Steel PE100 PN 10 fi 20/25mm
PP-Steel Flange PE100 PN 10 SDR 17 with a diameter of 20/25mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Loose galvanised flange PE100 PN 16 fi 20/25mm
Out-of-Stock
Loose galvanised flange PE100 PN 16 fi 20/25mm
Loose galvanised Flange PE100 PN 16 SDR 11 with a diameter of fi 20/25mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Loose galvanised flange PE100 PN 10 fi 20/25mm
Out-of-Stock
Loose galvanised flange PE100 PN 10 fi 20/25mm
Loose galvanised Flange PE100 PN 10 SDR 17 with a diameter of fi 20/25mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Flange BUSHING SPECIAL PE100 PN 16 fi 65/90mm
Out-of-Stock
Flange BUSHING SPECIAL PE100 PN 16 fi 65/90mm
Special Flange sleeve PE100 PN 16 SDR 11 with a diameter of 65/90mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Special Flange sleeve PE100 PN 10 fi 65/90mm
Out-of-Stock
Special Flange sleeve PE100 PN 10 fi 65/90mm
Special Flange sleeve PE100 PN 10 SDR 17 with a diameter of 65/90mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Flange bushing PE100 PN 16 fi 20mm
Out-of-Stock
Flange bushing PE100 PN 16 fi 20mm
Flange bushing PE100 PN 16 SDR 11 with a diameter of fi 20mm with standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Flange bushing PE100 PN 10 fi 50mm
Out-of-Stock
Flange bushing PE100 PN 10 fi 50mm
Flange sleeve PE100 PN 10 SDR 17 with a diameter of fi 50mm with standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Reduction PE100 PN 16 fi 25/20mm
Out-of-Stock
Reduction PE100 PN 16 fi 25/20mm
The reduction of PE100 PN 16 SDR 11 with a diameter of fi 25/20mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Reduction PE100 PN 10 fi 50/32mm
Out-of-Stock
Reduction PE100 PN 10 fi 50/32mm
Reduction of PE100 PN 10 SDR 17 with a diameter of fi 50/32mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Parallel Tee PE100 PN 16 fi 63mm Angle 45 °
Out-of-Stock
Parallel Tee PE100 PN 16 fi 63mm Angle 45 °
The parallel tee PE100 PN 16 SDR 11 with a diameter of fi 63mm, an angle of 45 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Reducer Tee PE100 PN 16 fi 63/50mm
Out-of-Stock
Reducer Tee PE100 PN 16 fi 63/50mm
Reducing tee PE100 PN 16 SDR 11 with a diameter of fi 63/50mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Parallel tee PE100 PN 10 fi 63mm
Out-of-Stock
Parallel tee PE100 PN 10 fi 63mm
The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 63mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Parallel tee PE100 PN 10 fi 63mm Angle 45 °
Out-of-Stock
Parallel tee PE100 PN 10 fi 63mm Angle 45 °
The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 63mm, an angle of 45 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Cap (cover cap) PE100 PN 16 fi 20mm
Out-of-Stock
Cap (cover cap) PE100 PN 16 fi 20mm
The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 20mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Cap (cover cap) PE100 PN 10 fi 50mm
Out-of-Stock
Cap (cover cap) PE100 PN 10 fi 50mm
Cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 50mm with standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Reducer Tee PE100 PN 10 fi 63/50mm
Out-of-Stock
Reducer Tee PE100 PN 10 fi 63/50mm
Reducing tee PE100 PN 10 SDR 17 with a diameter of fi 63/50mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Parallel Tee PE100 PN 16 fi 20mm
Out-of-Stock
Parallel Tee PE100 PN 16 fi 20mm
The parallel tee PE100 PN 16 SDR 11 with a diameter of fi 20mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 32 Angle 11 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 32 Angle 11 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 32 Angle 22 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 32 Angle 22 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, angle 22 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 32 angle 30 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 32 angle 30 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 32 angle 45 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 32 angle 45 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 32 angle 60 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 32 angle 60 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, angle 60 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 32 Angle 90 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 32 Angle 90 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 63 Angle 90 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 63 Angle 90 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 63 angle 60 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 63 angle 60 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, angle 60 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 63 angle 45 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 63 angle 45 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 63 Angle 30 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 63 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 63 Angle 22 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 63 Angle 22 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, angle 22 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 63 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 63 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 16 fi 20 Angle 90 °
Out-of-Stock
Butt elbow Long PE100 PN 16 fi 20 Angle 90 °
Butt Knee Long PE 100, PN 16 SDR 11 diameter fi 20mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 16 fi 20 angle 45 °
Out-of-Stock
Butt elbow Long PE100 PN 16 fi 20 angle 45 °
Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 20mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 16 fi 32 angle 30 °
Out-of-Stock
Butt elbow Long PE100 PN 16 fi 32 angle 30 °
Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 32mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 16 fi 32 Angle 15 °
Out-of-Stock
Butt elbow Long PE100 PN 16 fi 32 Angle 15 °
Butt elbow Long PE 100 PN 16 SDR 11 with a diameter of fi 32mm, angle of 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 10 fi 63 Angle 90 °
Out-of-Stock
Butt elbow Long PE100 PN 10 fi 63 Angle 90 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 63mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details