PP-R welded pipes and fittings-10 YEARS WARRANTY

Pressure System PP-R

Welded PPR Pipes and fittings System is designed for the installation of cold and hot water and central heating inside the building. The system is based on tubes and fittings in light grey or white in diameters from fi 16mm to fi 90mm. Durability and usability make these products widely used in residential and general construction.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

PP-R welded pipes PN10, PN16 and PN20-WARRANTY 10 YEARS
PP-R Pipes
STABI tubes with glass fibre, PP-R welded-10 YEARS WARRANTY
PP-R Glass-fibre pipes
PP-RCT tubes with glass fibre-reinforced
PP-RCT tubes with fiberglass
STABI Aluminium pipes
Welded PPR Fittings
PP-R Welded fittings
Welded Fittings PP-RCT
Tools for PP-R welding system
Tools
Welded Knee PPR fi 16mm angle 90 degrees
Welded elbow PP-R fi 16mm angle 90 degrees
Welded knee diameter fi 16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
STABI GLASS PPR/GF pipe PN-20 fi 20mm
STABI GLASS PP-R/GF fi 20mm pipe
Welded STABI pipe with glass fibre PN-20 with a diameter of fi 20mm, with a wall of 2, 8mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings.  Tub
Details View details  
Welded Knee PPR fi 16mm angle 45 degrees
Welded elbow PP-R fi 16mm angle 45 degrees
Welded knee diameter fi 16mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
STABI Pipe of PPR aluminium PN-25 fi 16mm
Out-of-Stock
STABI Pipe of PPR aluminium PN-25 fi 16mm
STABI pipe welded in aluminium PN-25 with a diameter of fi 16mm, with a wall of 2, 7mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fitting
Details View details  
Pipe Cutters
Pipe Cutters
The pipe cutter with the Polish standard PN-EN ISO 21003, made of gold-coloured brass, is intended for the installation of the PEX pipeline in systems for the transmission of water for consumption, for economic purposes and in heating installations (CO) and Industrial water circuits. The knee is characterized by total corrosion resistance, high durability and does not affect the quality of water
Details View details  
Welded Studs PPR fi 16mm angle 90 degrees
Welded nipple PP-R fi 16mm angle 90 degrees
Welded nipple with a diameter of fi 16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-10 fi 20mm
Welded pipe PP-R PN-10 fi 20mm
Welded pipe PPR PN-10 SDR-11o diameter fi 20mm, with a wall of 1, 9mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are shipp
Details View details  
Welded PPR fi 16mm
Welded PP-R fi 16mm
Welded with a diameter of fi 16mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
STABI GLASS PPR/GF pipe PN-20 fi 25mm
Out-of-Stock
STABI GLASS PP-R/GF fi 25mm Tube
STABI pipe welded with glass fibre PN-20 with a diameter of fi 25mm, with a wall of 3, 5mm length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are
Details View details  
Welded reduction PPR fi 16/20mm
PP-R fi 16/20mm reduction
Welded reduction with a diameter of fi 16/20mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
STABI GLASS PPR/GF pipe PN-20 fi 32mm
STABI GLASS PP-R/GF fi 32mm Tube
Welded STABI pipe with glass fibre PN-20 with a diameter of fi 32mm, with 4, 4mm wall length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings.  Tubes are shipp
Details View details  
Welded Tee PPR fi 16mm angle 90 degrees
Welded Tee PP-R fi 16mm angle 90 degrees
Welded tee with a diameter of fi 16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
STABI GLASS PPR/GF PN-20 fi 40mm pipe
STABI GLASS PP-R/GF fi 40mm pipe
Welded STABI pipe with glass fibre PN-20 with a diameter of fi 40mm, with a wall of 5, 6mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tub
Details View details  
Welded Reducer Tee PPR fi 20/16mm angle 90 degrees
Welded Reducer Tee PPR fi 20/16mm angle 90 degrees
Welded reduction tee with a diameter of 20/16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
STABI GLASS PPR/GF PN-20 fi 50mm pipe
Out-of-Stock
STABI GLASS PP-R/GF fi 50mm pipe
STABI pipe welded with glass fibre PN-20 with a diameter of fi 50mm, with a wall of 6, 9mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Details View details  
STABI GLASS PPR/GF pipe PN-20 fi 63mm
Out-of-Stock
STABI GLASS PP-R/GF fi 63mm Pipe
Welded STABI pipe with glass fibre PN-20 with a diameter of fi 63mm, with a wall of 8, 7mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings.
Details View details  
STABI GLASS PPR/GF pipe PN-20 fi 75mm
Out-of-Stock
STABI GLASS PP-R/GF fi 75mm Tube
STABI pipe welded with glass fiber PN-20 with a diameter of 75mm, with a wall of 10, 4mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
T
Details View details  
STABI GLASS PPR/GF pipe PN-20 fi 90mm
Out-of-Stock
STABI GLASS PP-R/GF fi 90mm Tube












Welded STABI pipe with glass fiber PN-20 with a diameter of 90mm, with a wall of 12, 5mm in length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings.  Tubes are
Details View details  
STABI Pipe of PPR aluminium PN-25 fi 20mm
Out-of-Stock
STABI Pipe of PPR aluminium PN-25 fi 20mm
STABI pipe welded in aluminium PN-25 with a diameter of fi 20mm, with a wall of 3, 4mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Details View details  
STABI Pipe of PPR aluminium PN-25 fi 25mm
Out-of-Stock
STABI Pipe of PPR aluminium PN-25 fi 25mm
STABI pipe welded in aluminium PN-25 with a diameter of fi 25mm, with a 4, 2mm wall with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
T
Details View details  
STABI Pipe of PPR aluminium PN-25 fi 32mm
Out-of-Stock
STABI Pipe of PPR aluminium PN-25 fi 32mm
STABI pipe welded in aluminium PN-25 with a diameter of fi 32mm, with a wall of 5, 4mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fitting
Details View details  
STABI Pipe of PPR aluminium PN-25 fi 40mm
Out-of-Stock
STABI Pipe of PPR aluminium PN-25 fi 40mm
STABI pipe welded in aluminium PN-25 with a diameter of fi 40mm, with a wall of 6, 7mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fitting
Details View details  
STABI Pipe of PPR aluminium PN-25 fi 50mm
Out-of-Stock
STABI Pipe of PPR aluminium PN-25 fi 50mm
STABI pipe welded in aluminium PN-25 with a diameter of fi 50mm, with a wall of 8, 4mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Details View details  
STABI Pipe of PPR aluminium PN-25 fi 63mm
Out-of-Stock
STABI Pipe of PPR aluminium PN-25 fi 63mm
STABI pipe welded in aluminum PN-25 with a diameter of fi 63mm, with a wall of 10, 5mm length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings.
PipeY
Details View details  
Welding Fittings PPR fi 20mm
Out-of-Stock
Welding fittings PP-R fi 20mm
Welded fittings with a diameter of fi 20mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic fittings are durable and heat resistant. 
Details View details  
STABI pipe in aluminium PPR PN-25 fi 75mm
Out-of-Stock
STABI pipe in aluminium PPR PN-25 fi 75mm
STABI pipe welded in aluminium PN-25 with a diameter of 75mm, with a wall of 12, 5mm in length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings.
Pipe
Details View details  
Elbow with external thread PP fi 16x1/2 "mm
Elbow with external thread PP-R fi 16x1/2
Elbow with external thread of diameter fi 16x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
STABI Tube in aluminium PPR PN-25 fi 90mm
Out-of-Stock
STABI Tube in aluminium PPR PN-25 fi 90mm
STABI pipe welded in aluminium PN-25 with a diameter of 90mm, with a wall of 15, 0mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings.
Details View details  
Elbow with internal thread PP fi 16x1/2 "
Elbow with internal thread PP-R fi 16x1/2
Elbow with internal thread of diameter fi 16x1/2 ", angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-10 fi 25mm
Welded pipe PP-R PN-10 fi 25mm
Welded pipe PPR PN-10 SDR-11o diameter fi 25mm, with a wall of 2, 3mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are shipp
Details View details  
Elbow GW Hanger PPR fi 16x1/2 "mm
Elbow GW Hanger PP-R fi 16x1/2
Knee hanger with inner thread diameter fi 16x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-10 fi 32mm
Welded pipe PP-R PN-10 fi 32mm
Welded pipe PPR PN-10 SDR-11o diameter fi 32mm, with a wall of 2, 9mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are shipp
Details View details  
Kolano GZ Hanger PPR fi 16x1/2 "mm
Elbow GZ Hanger PP-R fi 16x1/2
Knee hanger with external thread diameter fi 16x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-10 fi 40mm
Welded pipe PP-R PN-10 fi 40mm
Welded pipe PPR PN-10 SDR-11o diameter fi 40mm, with a wall of 3, 7mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are shipp
Details View details  
Mijanka PPR fi 16mm
Mijanka PP-R fi 16mm
The Mijanka with a diameter of fi 16mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The Mijanka made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-10 fi 50mm
Welded pipe PP-R PN-10 fi 50mm
Welded pipe PPR PN-10 SDR-11o diameter fi 50mm, with wall 4, 6mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are shipped in
Details View details