PP-R welded pipes and fittings-10 YEARS WARRANTY

Pressure System PP-R

Welded PPR Pipes and fittings System is designed for the installation of cold and hot water and central heating inside the building. The system is based on tubes and fittings in light grey or white in diameters from fi 16mm to fi 90mm. Durability and usability make these products widely used in residential and general construction.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

PP-R welded pipes PN10, PN16 and PN20-WARRANTY 10 YEARS
PP-R Pipes
STABI tubes with glass fibre, PP-R welded-10 YEARS WARRANTY
PP-R Glass-fibre pipes
PP-RCT tubes with glass fibre-reinforced
PP-RCT tubes with fiberglass
STABI Aluminium pipes
Welded PPR Fittings
PP-R Welded fittings
Welded Fittings PP-RCT
Tools for PP-R welding system
Tools
Welded PPR fi 32mm
Welded PP-R fi 32mm
Welded with a diameter of fi 32mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Male tee with external thread PPR fi 16x1/2 "mm angle 90 degrees
Tee with external thread PP-R fi 16x1/2
A tee with external thread diameter fi 16x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded PPR fi 40mm
Out-of-Stock
Welded PP-R fi 40mm
Welded with a diameter of fi 40mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Tee with internal thread PPR fi 16x1/2 "mm angle 90 degrees
Tee with internal thread PP-R fi 16x1/2
A tee with internal thread of diameter fi 16x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded PPR Fi 50mm
Welded PP-R fi 50mm
Welded with a diameter of fi 50mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Ball valve PPR fi 20mm angle
Out-of-Stock
Ball valve PP-R fi 20mm
A ball valve with a diameter of fi 20mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The ball valve made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Welded Studs PPR fi 20mm angle 45 degrees
Welded nylon PP-R fi 20mm angle 45 degrees
Welded nipple with a diameter of fi 20mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
with external thread PPR fi 16x1/2 mm
with external thread PP-R fi 16x1/2
with external thread diameter fi 16x1/2 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Welded PPR fi 63mm
Welded PP-R fi 63mm
Welded with a diameter of fi 63mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
with internal thread PP fi 16x1/2 mm
with internal thread PP-R fi 16x1/2
with Internal thread fi 16x1/2 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Welded PPR Fi 75mm
Out-of-Stock
Welded PP-R fi 75mm
Welded with a diameter of fi 75mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Screw with external thread PPR fi 20x1/2 "mm
Screw with external thread PP-R fi 20x1/2
Screw with external thread diameter fi 20x1/2 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Welded nipple-Welding PPR fi 25mm angle 45 degrees
Welded nipple PP-R fi 25mm angle 45 degrees
Welded nipple with a diameter of fi 25mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Screw with internal thread PPR fi 20x1/2 "mm
Out-of-Stock
Screw with internal thread PP-R fi 20x1/2
Screw with internal thread fi 20x1/2 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Welded PPR Fi 90mm
Out-of-Stock
Welded PP-R fi 90mm
Welded with a diameter of fi 90mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Semi-screw with internal thread PPR fi 20x3/4 "mm
Semi-screw with internal thread PP-R fi 20x3/4
Semi-screw with inner thread diameter fi 20x3/4 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The semi-screw made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Studs PPR fi 32mm angle 45 degrees
Welded nipple PP-R fi 32mm angle 45 degrees
Welded nipple with a diameter of fi 32mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Knee PPR fi 25mm angle 90 degrees
Out-of-Stock
Welded elbow PP-R fi 25mm angle 90 degrees
Welded Knee diameter fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 20mm angle 90 degrees
Welded Tee PP-R fi 20mm angle 90 degrees
Welded tee with a diameter of fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PPR fi 32mm angle 90 degrees
Out-of-Stock
Welded elbow PP-R fi 32mm angle 90 degrees
Welded Knee diameter fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 25mm angle 90 degrees
Welded Tee PP-R fi 25mm angle 90 degrees
Welded tee with a diameter of fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PPR fi 40mm angle 90 degrees
Out-of-Stock
Welded elbow PP-R fi 40mm angle 90 degrees
Welded knee diameter fi 40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 32mm angle 90 degrees
Welded Tee PP-R fi 32mm angle 90 degrees
Welded tee with a diameter of fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PPR fi 50mm angle 90 degrees
Out-of-Stock
Welded elbow PP-R fi 50mm angle 90 degrees
Welded Knee diameter fi 50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 40mm angle 90 degrees
Welded Tee PP-R fi 40mm angle 90 degrees
Welded tee with a diameter of fi 40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Knee PPR fi 63mm angle 90 degrees
Welded elbow PP-R fi 63mm angle 90 degrees
Welded Knee diameter fi 63mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 50mm angle 90 degrees
Out-of-Stock
Welded Tee PP-R fi 50mm angle 90 degrees
Welded tee with diameter fi 50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Knee PPR fi 75mm angle 90 degrees
Out-of-Stock
Welded elbow PP-R fi 75mm angle 90 degrees
Welded Knee diameter fi 75mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 63mm angle 90 degrees
Welded Tee PP-R fi 63mm angle 90 degrees
Welded tee with a diameter of fi 63mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PPR fi 90mm angle 90 degrees
Out-of-Stock
Welded elbow PP-R fi 90mm angle 90 degrees
Welded Knee diameter fi 90mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with external thread PPR fi 20x1/2 "mm angle 90 degrees
Tee with external thread PP-R fi 20x1/2
The tee with external thread diameter fi 20x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 75mm angle 90 degrees
Out-of-Stock
Welded Tee PP-R fi 75mm angle 90 degrees
Welded tee with a diameter of 75mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with external thread PPR fi 20x3/4 "mm angle 90 degrees
Tee with external thread PP-R fi 20x3/4
The tee with external thread diameter fi 20x3/4 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 90mm angle 90 degrees
Out-of-Stock
Welded Tee PP-R fi 90mm angle 90 degrees
Welded tee with diameter fi 90mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
External thread Tee PPR fi 25x1/2 "mm angle 90 degrees
Tee with external thread PP-R fi 25x1/2
Tee with external thread diameter fi 25x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 25/16mm angle 90 degrees
Welded Reducer Tee PPR fi 25/16mm angle 90 degrees
Welded reduction tee with diameter fi 25/16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details