PP-R welded pipes and fittings-10 YEARS WARRANTY

Pressure System PP-R

Welded PPR Pipes and fittings System is designed for the installation of cold and hot water and central heating inside the building. The system is based on tubes and fittings in light grey or white in diameters from fi 16mm to fi 90mm. Durability and usability make these products widely used in residential and general construction.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

PP-R welded pipes PN10, PN16 and PN20-WARRANTY 10 YEARS
PP-R Pipes
STABI tubes with glass fibre, PP-R welded-10 YEARS WARRANTY
PP-R Glass-fibre pipes
PP-RCT tubes with glass fibre-reinforced
PP-RCT tubes with fiberglass
STABI Aluminium pipes
Welded PPR Fittings
PP-R Welded fittings
Welded Fittings PP-RCT
Tools for PP-R welding system
Tools
Holder fi 20mm
Out-of-Stock
Holder fi 20mm
The holder fi 20mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating inside the building. The handle made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-10 fi 63mm
Out-of-Stock
Welded pipe PP-R PN-10 fi 63mm
Welded pipe PPR PN-10 SDR-11o diameter fi 63mm, with 5, 8mm wall with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are shipped in
Details View details  
Welded pipe PPR PN-10 fi 75mm
Welded pipe PP-R PN-10 fi 75mm
Welded pipe PPR PN-10 SDR-11o diameter fi 75mm, with 6, 8mm wall with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are shipped in
Details View details  
PPR Plug fi 16mm
PP-R plug fi 16mm
PPR fi 16mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant. 
Details View details  
Welded pipe PPR PN-10 fi 90mm
Out-of-Stock
Welded pipe PP-R PN-10 fi 90mm
Welded pipe PPR PN-10 SDR-11o diameter fi 90mm, with a wall of 8, 2mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are shipp
Details View details  
Welded pipe PPR PN-16 fi 20mm
Out-of-Stock
Welded pipe PP-R PN-16 fi 20mm
Welded pipe PPR PN-16 SDR-7.4 with a diameter of fi 20mm, with a wall of 2, 8mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
T
Details View details  
Welded pipe PPR PN-16 fi 25mm
Out-of-Stock
Welded pipe PP-R PN-16 fi 25mm
Welded pipe PPR PN-16 SDR-7.4 with a diameter of fi 25mm, with a wall of 3, 5mm length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are sh
Details View details  
Welded pipe PPR PN-16 fi 32mm
Out-of-Stock
Welded pipe PP-R PN-16 fi 32mm
Welded pipe PPR PN-16 SDR-7.4 with a diameter of fi 32mm, with a wall 4, 4mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tube
Details View details  
Welded pipe PPR PN-16 fi 40mm
Welded pipe PP-R PN-16 fi 40mm
Welded pipe PPR PN-16 SDR-7.4 with a diameter of fi 40mm, with a 5, 5mm wall length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are s
Details View details  
Welded pipe PPR PN-16 fi 50mm
Welded pipe PP-R PN-16 fi 50mm
Welded pipe PPR PN-16 SDR-7.4 with diameter fi 50mm, with 6, 9mm wall with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are shipp
Details View details  
Welded elbow PPR fi 20mm angle 45 degrees
Welded elbow PP-R fi 20mm angle 45 degrees
Welded Knee diameter fi 20mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-16 fi 63mm
Welded pipe PP-R PN-16 fi 63mm
Welded pipe PPR PN-16 SDR-7.4 with a diameter of fi 63mm, with a wall of 8, 6mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
T
Details View details  
Welded Knee PPR fi 25mm angle 45 degrees
Welded elbow PP-R fi 25mm angle 45 degrees
Welded Knee diameter fi 25mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-16 fi 75mm
Welded pipe PP-R PN-16 fi 75mm
Welded pipe PPR PN-16 SDR-7.4 with a diameter of 75mm, with a wall of 10, 3mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tub
Details View details  
Welded elbow PPR fi 32mm angle 45 degrees
Out-of-Stock
Welded elbow PP-R fi 32mm angle 45 degrees
Welded Knee diameter fi 32mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-16 fi 90mm
Out-of-Stock
Welded pipe PP-R PN-16 fi 90mm
Welded pipe PPR PN-16 SDR-7.4 with a diameter of fi 90mm, with a wall of 12, 3mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings.
Details View details  
Welded elbow PPR fi 40mm angle 45 degrees
Welded elbow PP-R fi 40mm angle 45 degrees
Welded knee diameter fi 40mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PPR fi 50mm angle 45 degrees
Welded elbow PP-R fi 50mm angle 45 degrees
Welded Knee diameter fi 50mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-20 fi 16mm
Welded pipe PP-R PN-20 fi 16mm
Welded pipe PPR PN-20 SDR-6 with a diameter of fi 16mm, with a wall of 2, 7mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes a
Details View details  
Welded Knee PPR fi 63mm angle 45 degrees
Welded elbow PP-R fi 63mm angle 45 degrees
Welded Knee diameter fi 63mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-20 fi 20mm
Welded pipe PP-R PN-20 fi 20mm
Welded pipe PPR PN-20 SDR-6 with a diameter of fi 20mm, with a wall of 3, 4mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and a central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
T
Details View details  
Welded Knee PPR fi 75mm angle 45 degrees
Out-of-Stock
Welded elbow PP-R fi 75mm angle 45 degrees
Welded Knee diameter fi 75mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-20 fi 25mm
Welded pipe PP-R PN-20 fi 25mm
Welded pipe PPR PN-20 SDR-6 with a diameter of fi 25mm, with a wall of 4, 2mm length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are ship
Details View details  
Welded elbow PPR fi 90mm angle 45 degrees
Out-of-Stock
Welded elbow PP-R fi 90mm angle 45 degrees
Welded Knee diameter fi 90mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-20 fi 32mm
Welded pipe PP-R PN-20 fi 32mm
Welded pipe PPR PN-20 SDR-6 with a diameter of fi 32mm, with a wall of 5, 4mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tub
Details View details  
Welded Studs PPR fi 20mm angle 90 degrees
Welded nylon PP-R fi 20mm angle 90 degrees
Welded nipple with a diameter of fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-20 fi 40mm
Welded pipe PP-R PN-20 fi 40mm
Welded pipe PPR PN-20 SDR-6 with diameter fi 40mm, with 6, 7mm wall with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are shipped
Details View details  
Welded nipple-Welding PPR fi 25mm angle 90 degrees
Out-of-Stock
Welded nipple PP-R fi 25mm angle 90 degrees
Welded nipple with a diameter of fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-20 fi 50mm
Welded pipe PP-R PN-20 fi 50mm
Welded pipe PPR PN-20 SDR-6 with a diameter of fi 50mm, with a wall of 8, 3mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tub
Details View details  
Welded PPR Fi 20mm
Welded PP-R fi 20mm
Welded with a diameter of fi 20mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded pipe PPR PN-20 fi 63mm
Welded pipe PP-R PN-20 fi 63mm












Welded pipe PPR PN-20 SDR-6 with a diameter of fi 63mm, with a wall of 10, 5mm length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings.  Tubes are shi
Details View details  
Welded PPR Fi 25mm
Welded PP-R fi 25mm
Welded with a diameter of fi 25mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded pipe PPR PN-20 fi 75mm
Out-of-Stock
Welded pipe PP-R PN-20 fi 75mm
Welded pipe PPR PN-20 SDR-6 with a diameter of 75mm, with a wall of 12, 5mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes are
Details View details  
Welded Studs PPR fi 32mm angle 90 degrees
Out-of-Stock
Welded nipple PP-R fi 32mm angle 90 degrees
Welded nipple with a diameter of fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PPR fi 20mm angle 90 degrees
Out-of-Stock
Welded elbow PP-R fi 20mm angle 90 degrees
Welded Knee diameter fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-20 fi 90mm
Out-of-Stock
Welded pipe PP-R PN-20 fi 90mm
Welded pipe PPR PN-20 SDR-6 with diameter fi 90mm, with a wall of 15, 0mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tubes a
Details View details