PP-R welded pipes and fittings-10 YEARS WARRANTY

Pressure System PP-R

Welded PPR Pipes and fittings System is designed for the installation of cold and hot water and central heating inside the building. The system is based on tubes and fittings in light grey or white in diameters from fi 16mm to fi 90mm. Durability and usability make these products widely used in residential and general construction.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

PP-R welded pipes PN10, PN16 and PN20-WARRANTY 10 YEARS
PP-R Pipes
STABI tubes with glass fibre, PP-R welded-10 YEARS WARRANTY
PP-R Glass-fibre pipes
PP-RCT tubes with glass fibre-reinforced
PP-RCT tubes with fiberglass
STABI Aluminium pipes
Welded PPR Fittings
PP-R Welded fittings
Welded Fittings PP-RCT
Tools for PP-R welding system
Tools
Welded reduction PPR fi 110/75mm
Out-of-Stock
PP-R fi 110/75mm welded reduction
Welded reduction with a diameter of fi 110/75mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
PP-RCT fi 32/25mm welded reduction
Out-of-Stock
PP-RCT fi 32/25mm welded reduction
PP-RCT reduction with fi 32/25mm diameter, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded reduction PPR fi 110/90mm
Out-of-Stock
PP-R fi 110/90mm welded reduction
Welded reduction with a diameter of fi 110/90mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
PP-RCT-Fi 40/25mm welded reduction
Out-of-Stock
PP-RCT-Fi 40/25mm welded reduction
PP-RCT reduction with fi 40/25mm diameter, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welding Tee PP-RCT fi 32/20mm angle 90 degrees
Out-of-Stock
Welding Tee PP-RCT fi 32/20mm angle 90 degrees
PP-RCT welded reduction tee with a diameter of fi 32/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reduction Tee PP-RCT fi 32/25mm angle 90 degrees
Out-of-Stock
Welded reduction Tee PP-RCT fi 32/25mm angle 90 degrees
PP-RCT welded reduction tee with a diameter of fi 32/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 110mm angle 90 degrees
Out-of-Stock
Welded Tee PP-R fi 110mm angle 90 degrees
Welded tee with a diameter of fi 110mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Reduction Tee Welded PP-RCT fi 40/20mm angle 90 degrees
Out-of-Stock
Reduction Tee Welded PP-RCT fi 40/20mm angle 90 degrees
PP-RCT welded reduction tee with a diameter of fi 40/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 110/50mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 110/50mm angle 90 degrees
Welded reduction tee with a diameter of fi 110/50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welding Tee PP-RCT fi 40/25mm angle 90 degrees
Out-of-Stock
Welding Tee PP-RCT fi 40/25mm angle 90 degrees
PP-RCT welded reduction tee, diameter fi 40/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 110/75mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 110/75mm angle 90 degrees
Welded reduction tee with a diameter of fi 110/75mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
PP-RCT-Fi 40/32mm Welded reduction
Out-of-Stock
PP-RCT-Fi 40/32mm Welded reduction
PP-RCT reduction with a diameter of fi 40/32mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded reducer Tee PPR fi 110/63mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 110/63mm angle 90 degrees
Welded reduction tee with a diameter of fi 110/63mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 110/90mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 110/90mm angle 90 degrees
Welded reduction tee with a diameter of fi 110/90mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
PPR fi 110mm Plug
Out-of-Stock
PP-R plug fi 110mm
PPR fi 110mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant. 
Details View details  
Compensation PP-R fi 20mm
Compensation PP-R fi 20mm
Welded compensation with a diameter of fi 20mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. Loop compensation for thermal elongation is made of the highest quality plastics.
Details View details  
Compensation PP-R fi 25mm
Compensation PP-R fi 25mm
Welded compensation with a diameter of fi 25mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. Loop compensation for thermal elongation is made of the highest quality plastics.
Details View details  
Compensation PP-R fi 32mm
Compensation PP-R fi 32mm
Welded compensation with a diameter of fi 32mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. Loop compensation for thermal elongation is made of the highest quality plastics.
Details View details  
Compensation PP-R fi 40mm
Out-of-Stock
Compensation PP-R fi 40mm
Welded compensation of the diameter fi 40mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. Loop compensation for thermal elongation is made of the highest quality plastics.
Details View details  
Elbow GW Hanger PPR fi 25x3/4 "mm
Elbow GW Hanger PP-R fi 25x3/4
Knee hanger with inner thread diameter fi 25x3/4mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Elbow GW Hanger PPR fi 25x1/2 "mm
Elbow GW Hanger PP-R fi 25x1/2
Knee hanger with inner thread diameter fi 25x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Elbow GW Hanger PPR fi 25x3/4 "mm
Out-of-Stock
Elbow GZ Hanger PP-R fi 25x3/4
Knee hanger with external thread diameter fi 25x3/4mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Studs PPR fi 16mm angle 45 degrees
Welded nipple PP-R fi 16mm angle 45 degrees
Welded nipple with a diameter of fi 16mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Holder fi 20mm
Bracket fi 16mm
Bracket fi 16mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for installation of central heating inside the building. The handle made of the highest quality plastic is durable and resistant to heat. 
Details View details