PP-R welded pipes and fittings-10 YEARS WARRANTY

Pressure System PP-R

Welded PPR Pipes and fittings System is designed for the installation of cold and hot water and central heating inside the building. The system is based on tubes and fittings in light grey or white in diameters from fi 16mm to fi 90mm. Durability and usability make these products widely used in residential and general construction.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

PP-R welded pipes PN10, PN16 and PN20-WARRANTY 10 YEARS
PP-R Pipes
STABI tubes with glass fibre, PP-R welded-10 YEARS WARRANTY
PP-R Glass-fibre pipes
PP-RCT tubes with glass fibre-reinforced
PP-RCT tubes with fiberglass
STABI Aluminium pipes
Welded PPR Fittings
PP-R Welded fittings
Welded Fittings PP-RCT
Tools for PP-R welding system
Tools
External thread Tee PPR fi 25x3/4 "mm angle 90 degrees
Tee with external thread PP-R fi 25x3/4
A tee with external thread of diameter fi 25x3/4 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 25/20mm angle 90 degrees
Out-of-Stock
Welded Reducer Tee PPR fi 25/20mm angle 90 degrees
Welded reduction tee with a diameter of fi 25/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with internal thread PPR fi 20x1/2 "mm angle 90 degrees
Tee with internal thread PP-R fi 20x1/2
Tee with inner thread diameter fi 20x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 32/16mm angle 90 degrees
Out-of-Stock
Welded Reducer Tee PPR fi 32/16mm angle 90 degrees
Welded reduction Tee with diameter fi 32/16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with internal thread PPR fi 20x3/4 "mm angle 90 degrees
Tee with internal thread PP-R fi 20x3/4
The tee with internal thread diameter fi 20x3/4 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 32/20mm angle 90 degrees
Welded Reducer Tee PPR fi 32/20mm angle 90 degrees
Welded reduction tee with a diameter of fi 32/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with internal thread PPR fi 25x1/2 "mm angle 90 degrees
Tee with internal thread PP-R fi 25x1/2
Tee with inner thread diameter fi 25x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 32/25mm angle 90 degrees
Out-of-Stock
Welded Reducer Tee PPR fi 32/25mm angle 90 degrees
Welded reduction tee with a diameter of fi 32/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with internal thread PPR fi 25x3/4 "mm angle 90 degrees
Tee with internal thread PP-R fi 25x3/4
Tee with inner thread diameter fi 25x3/4 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 40/20mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 40/20mm angle 90 degrees
Welded reduction tee with a diameter of fi 40/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Ball Valve PPR fi 25mm
Out-of-Stock
Ball valve PP-R fi 25mm
The ball valve, fi 25mm in diameter, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The ball valve made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 40/25mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 40/25mm angle 90 degrees
Welded reduction tee with diameter fi 40/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Ball Valve PPR fi 32mm
Out-of-Stock
Ball valve PP-R fi 32mm
The ball valve with a diameter of fi 32mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The ball valve made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 40/32mm angle 90 degrees
Welded reducer Tee PPR fi 40/32mm angle 90 degrees
Welded reduction tee with diameter fi 40/32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Ball Valve PPR fi 40mm
Out-of-Stock
Ball valve PP-R fi 40mm
The ball valve of the diameter fi 40mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The ball valve made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 50/16mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 50/16mm angle 90 degrees
Welded reduction tee with diameter fi 50/16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Ball Valve PPR fi 50mm
Ball valve PP-R fi 50mm
A ball valve with a diameter of fi 50mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The ball valve made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 50/20mm angle 90 degrees
Welded reducer Tee PPR fi 50/20mm angle 90 degrees
Welded reduction tee with a diameter of fi 50/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Screw with external thread PPR fi 20x3/4 "mm
Screw with external thread PP-R fi 20x3/4
Screw with external thread diameter fi 20x3/4 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Welded reducer Tee PPR fi 50/25mm angle 90 degrees
Welded reducer Tee PPR fi 50/25mm angle 90 degrees
Welded reduction tee with diameter fi 50/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Screw with external thread PPR fi 25x3/4 "mm
Screw with external thread PP-R fi 25x3/4
Screw with external thread diameter fi 25x3/4 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Welded reducer Tee PPR fi 50/32mm angle 90 degrees
Welded reducer Tee PPR fi 50/32mm angle 90 degrees
Welded reduction tee with diameter fi 50/32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Screw with external thread PPR fi 25x1 "mm
Out-of-Stock
Screw with external thread PP-R fi 25x1
Screw with external thread diameter fi 25x1 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Welded reducer Tee PPR fi 50/40mm angle 90 degrees
Welded reducer Tee PPR fi 50/40mm angle 90 degrees
Welded reduction tee with diameter fi 50/40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Screw with internal thread PPR fi 20x3/4 "mm
Out-of-Stock
Screw with internal thread PP-R fi 20x3/4
Screw with inner thread diameter fi 20x3/4 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Welded Reducer Tee PPR fi 63/32mm angle 90 degrees
Welded Reducer Tee PPR fi 63/32mm angle 90 degrees
Welded reduction tee with diameter fi 63/32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Screw with internal thread PPR fi 25x3/4 "mm
Out-of-Stock
Screw with internal thread PP-R fi 25x3/4
Screw with internal thread fi 25x3/4 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Welded Reducer Tee PPR fi 63/40mm angle 90 degrees
Welded Reducer Tee PPR fi 63/40mm angle 90 degrees
Welded reduction tee with diameter fi 63/40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Screw with internal thread PPR fi 25x1 "mm
Out-of-Stock
Screw with internal thread PP-R fi 25x1
Screw with inner thread diameter fi 25x1 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Welded Reducer Tee PPR fi 63/50mm angle 90 degrees
Welded Reducer Tee PPR fi 63/50mm angle 90 degrees
Welded reduction tee with diameter fi 63/50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Semi-screw with internal thread PPR fi 25x1 "mm
Out-of-Stock
Semi-screw with internal thread PP-R fi 25x1
Semi-screw with inner thread diameter fi 25x1 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The semi-screw made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 75/25mm angle 90 degrees
Out-of-Stock
Welded Reducer Tee PPR fi 75/25mm angle 90 degrees
Welded reduction tee with a diameter of fi 75/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
with external thread PPR fi 16x3/4 mm
Out-of-Stock
with external thread PP-R fi 16x3/4
with external thread diameter fi 16x3/4 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 75/32mm angle 90 degrees
Out-of-Stock
Welded Reducer Tee PPR fi 75/32mm angle 90 degrees
Welded reduction tee with a diameter of fi 75/32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
with external thread PPR fi 20x1/2 mm
Out-of-Stock
with external thread PP-R fi 20x1/2
with external thread diameter fi 20x1/2 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 75/40mm angle 90 degrees
Welded Reducer Tee PPR fi 75/40mm angle 90 degrees
Welded reduction tee with a diameter of fi 75/40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details