K2-Kan outer form fittings with PP

ID-Form Fittings

A wide selection of K2-Kan external sewage fittings, non-pressurized PP with different dimensions and operating parameters for installation of sewage systems, draining of household and commercial sewage. It consists of fittings in diameters up to fi 160mm to fi 1000mm in orange color. 

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

Two-socket knee-length K2-Kan with PP
Two-socket knees
Corrugated tees with a departure to the smooth pipe K2-Kan with PP
Tees with a smooth pipe
Crimed Fittings K2-Kan with PP
Fittings
Corrugated K2-Kan with PP
Sleeves
Crimed reducers K2-Kan with PP
Reductions
Crimed Fittings for Cup K2-Kan with PP
Fittings for Chalks
Crimed fittings for K2-Kan PP plain pipes
Plain Pipe Fittings
Single-hull knees K2-Kan with PP
Monorelic Knees
K2-Kan Pass Tees with PP
Tees
Crimed plugs K2-Kan with PP
Plugs
Crimed Saddle K2-Kan with PP
PP Fifth Wheel Connection
Pipe Seals K2-Kan
Seals
Fifth Wheel connection with PP DN 400-200mm
Out-of-Stock
Fifth Wheel connection with PP DN 400-200mm
The K2-Kan fifth Wheel connection with a diameter of 400-200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the connection of mechanical pipes in the construction of sanitary and non-sewage sewer. The connection made of the highest quality plastic with gasket, is durable and tight in joints.
Details View details  
Crimed Cork (structural) with PP DN 400mm
Out-of-Stock
Crimed Cork (structural) with PP DN 400mm
Crimped Cork (Universal) K2-Kan with a diameter of fi 400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for sealing the ends of sewage systems in sanitary construction and Combined. Cork made of the highest quality plastic without gasket, is sturdy and sealed in joints.
Details View details  
Transition tight Corrugated (structural) with PP DN 400mm
Out-of-Stock
Transition tight Corrugated (structural) with PP DN 400mm
The passage of a tight corrugated (structural) K2-Kan with an internal diameter of fi 400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for a sealed connection of any type of sewer pipe, with Concrete wells. The transition made of the highest quality plastics without gasket, is durable and tight in joints.
Details View details  
Corrugated (structural) Reduction K2-Kan BK with PP DN 400/300mm
Out-of-Stock
Corrugated (structural) Reduction K2-Kan BK with PP DN 400/300mm
The corrugated (structural) reduction of the K2-Kan BK with a diameter of fi 400/300mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the flow pipes in the construction of sanitary and general sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  
Details View details  
Corrugated reduction (structural) with PP DN 300/250mm
Out-of-Stock
Corrugated reduction (structural) with PP DN 300/250mm
The corrugated (structural) reduction of K2-Kan with a diameter of fi 300/250mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary and general sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  
Details View details  
Crimper nipple (with PVC Cup) with PP DN 400/400mm
Out-of-Stock
Crimper nipple (with PVC Cup) with PP DN 400/400mm
Corrugated (structural) coupling with the entrance to the smooth pipe with a cup of PVC K2-Kan with a diameter of fi 400/400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the flow pipes in the construction Sanitary sewer system. The coupling is made of the highest quality plastic without gasket, it is durable and tight in joints.
Details View details  
Crimper Nipple (for PVC Cup) with PP DN 400/400mm
Crimper Nipple (for PVC Cup) with PP DN 400/400mm
Corrugated (structural) coupling with the entry into the cup of PVC K2-Kan with a diameter of fi 400/400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic without gasket, it is durable and tight in joints.
Details View details  
Corrugated (structural) cap with PP DN 400mm
Out-of-Stock
Corrugated (structural) cap with PP DN 400mm
A corrugated (structural) K2-Kan with a diameter of fi 400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The cap is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Crimed coupling (structural) with PP DN 400mm
Out-of-Stock
Crimed coupling (structural) with PP DN 400mm
Corrugated (structural) coupling K2-Kan with a diameter of fi 400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and general sewer. The coupling is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Flake Tee (structural) with PP DN 250/250 angle 90 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 250/250 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 250/250mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake Tee (structural) with PP DN 250/250 angle 45 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 250/250 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 250/250mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Corrugated (structural) elbow with PP DN 200 angle 15 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 200 angle 15 degree
Corrugated (structural) Elbow K2-Kan with a diameter of 15 degrees fi 200mm, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and non-float sewer. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
GASKET PP CORED Pipe DN 500mm
Out-of-Stock
GASKET PP CORED Pipe DN 500mm
A seal for the (corrugated) flow pipe K2-Kan with a diameter of fi 500mm, double-lip, with the Polish standard PN-EN 13476-3, in black, is intended for the watertight joining of the pass pipes in the construction of sanitary and general sewer. Gasket made of the highest quality plastics, it is durable and tight in joints.
Details View details  
Fifth Wheel connection with PP DN 500-160mm
Out-of-Stock
Fifth Wheel connection with PP DN 500-160mm
The K2-Kan fifth Wheel connection with a diameter of 500-160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the connection of mechanical pipes in the construction of sanitary and non-sewage sewer. The connection made of the highest quality plastic with gasket, is durable and tight in joints.
Details View details  
Crimed Cork (structural) with PP DN 500mm
Out-of-Stock
Crimed Cork (structural) with PP DN 500mm
Crimped Cork (Universal) K2-Kan with a diameter of fi 500mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for sealing the ends of sewage systems in sanitary construction and Combined. Cork made of the highest quality plastic without gasket, is sturdy and sealed in joints.
Details View details  
Transition tight Corrugated (structural) with PP DN 500mm
Out-of-Stock
Transition tight Corrugated (structural) with PP DN 500mm
The passage of a tight corrugated (structural) K2-Kan with an inner diameter of fi 500mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for a sealed connection of any type of sewer pipe, with Concrete wells. The transition made of the highest quality plastics without gasket, is durable and tight in joints.
Details View details  
Corrugated (structural) Reduction K2-Kan BK with PP DN 500/300mm
Out-of-Stock
Corrugated (structural) Reduction K2-Kan BK with PP DN 500/300mm
The corrugated (structural) reduction of the K2-Kan BK with a diameter of fi 500/300mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the flow pipes in the construction of sanitary and general sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  
Details View details  
Corrugated reduction (structural) with PP DN 400/250mm
Out-of-Stock
Corrugated reduction (structural) with PP DN 400/250mm
The corrugated (structural) reduction of K2-Kan with a diameter of fi 400/250mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the flow pipes in the construction of sanitary and general sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  
Details View details  
Crimper nipple (with PVC Cup) with PP DN 500/500mm
Out-of-Stock
Crimper nipple (with PVC Cup) with PP DN 500/500mm
Corrugated (structural) coupling with the entrance to the smooth pipe with a cup of PVC K2-Kan with a diameter of fi 500/500mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction Sanitary sewer system. The coupling is made of the highest quality plastic without gasket, it is durable and tight in joints.
Details View details  
Crimper Nipple (for PVC Cup) with PP DN 500/500mm
Out-of-Stock
Crimper Nipple (for PVC Cup) with PP DN 500/500mm
Corrugated (structural) coupling with the entry into the cup of PVC K2-Kan with a diameter of fi 500/500mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for joining the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic without gasket, it is durable and tight in joints.
Details View details  
Corrugated (structural) cap with PP DN 500mm
Out-of-Stock
Corrugated (structural) cap with PP DN 500mm
A corrugated (structural) K2-Kan with a diameter of fi 500mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the flow pipes in the construction of sanitary and general sewer. The cap is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Crimed coupling (structural) with PP DN 500mm
Out-of-Stock
Crimed coupling (structural) with PP DN 500mm
A corrugated (structural) coupling K2-Kan with a diameter of fi 500mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Flake Tee (structural) with PP DN 300/200 angle 90 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 300/200 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 300/200mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake Tee (structural) with PP DN 300/200 angle 45 degrees
Flake Tee (structural) with PP DN 300/200 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 300/200mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Corrugated (structural) elbow with PP DN 200 angle 30 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 200 angle 30 degree
Corrugated (structural) Elbow K2-Kan with a diameter of 30 degrees fi 200mm, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
GASKET PP CORED Pipe DN 600mm
Out-of-Stock
GASKET PP CORED Pipe DN 600mm
A seal for the (corrugated) flow pipe K2-Kan with a diameter of fi 600mm, double-lip, with the Polish standard PN-EN 13476-3, in black, is intended for the watertight joining of the pass pipes in the construction of sanitary and general sewer. Gasket made of the highest quality plastics, it is durable and tight in joints.
Details View details  
Fifth Wheel connection with PP DN 500-200mm
Out-of-Stock
Fifth Wheel connection with PP DN 500-200mm
The K2-Kan fifth Wheel connection with a diameter of 500-200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the connection of mechanical pipes in the construction of sanitary and non-sewage sewer. The connection made of the highest quality plastic with gasket, is durable and tight in joints.
Details View details  
Crimed Cork (structural) with PP DN 600mm
Out-of-Stock
Crimed Cork (structural) with PP DN 600mm
Crimped Cork (Universal) K2-Kan with a diameter of fi 600mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for sealing the ends of sewage systems in sanitary construction and Combined. Cork made of the highest quality plastic without gasket, is sturdy and sealed in joints.
Details View details  
Transition tight Corrugated (structural) with PP DN 600mm
Out-of-Stock
Transition tight Corrugated (structural) with PP DN 600mm
The passage of a tight corrugated (structural) K2-Kan with an internal diameter of fi 600mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for a sealed connection of any type of sewer pipe, with Concrete wells. The transition made of the highest quality plastics without gasket, is durable and tight in joints.
Details View details