K2-Kan outer form fittings with PP

ID-Form Fittings

A wide selection of K2-Kan external sewage fittings, non-pressurized PP with different dimensions and operating parameters for installation of sewage systems, draining of household and commercial sewage. It consists of fittings in diameters up to fi 160mm to fi 1000mm in orange color. 

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

Two-socket knee-length K2-Kan with PP
Two-socket knees
Corrugated tees with a departure to the smooth pipe K2-Kan with PP
Tees with a smooth pipe
Crimed Fittings K2-Kan with PP
Fittings
Corrugated K2-Kan with PP
Sleeves
Crimed reducers K2-Kan with PP
Reductions
Crimed Fittings for Cup K2-Kan with PP
Fittings for Chalks
Crimed fittings for K2-Kan PP plain pipes
Plain Pipe Fittings
Single-hull knees K2-Kan with PP
Monorelic Knees
K2-Kan Pass Tees with PP
Tees
Crimed plugs K2-Kan with PP
Plugs
Crimed Saddle K2-Kan with PP
PP Fifth Wheel Connection
Pipe Seals K2-Kan
Seals
Corrugated (structural) Reduction K2-Kan BK with PP DN 500/400mm
Out-of-Stock
Corrugated (structural) Reduction K2-Kan BK with PP DN 500/400mm
The corrugated (structural) reduction of the K2-Kan BK with a diameter of fi 500/400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  
Details View details  
Corrugated reduction (structural) with PP DN 400/300mm
Out-of-Stock
Corrugated reduction (structural) with PP DN 400/300mm
The corrugated (structural) reduction of K2-Kan with a diameter of fi 400/300mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  
Details View details  
Crimper Nipple (for PVC Cup) with PP DN 600/630mm
Out-of-Stock
Crimper Nipple (for PVC Cup) with PP DN 600/630mm
Corrugated (structural) coupling with the entrance to the cup of PVC K2-Kan with a diameter of fi 600/630mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic without gasket, it is durable and tight in joints.
Details View details  
Corrugated (structural) cap with PP DN 600mm
Out-of-Stock
Corrugated (structural) cap with PP DN 600mm
The K2-Kan corrugated (structural) cap with a diameter of fi 600mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The cap is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Crimed coupling (structural) with PP DN 600mm
Out-of-Stock
Crimed coupling (structural) with PP DN 600mm
The K2-Kan corrugated (structural) coupling with a diameter of fi 600mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and general sewage. The coupling is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Flake Tee (structural) with PP DN 300/250 angle 90 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 300/250 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 300/250mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake Tee (structural) with PP DN 300/250 angle 45 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 300/250 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 300/250mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Corrugated (structural) knee with PP DN 200 angle 45 degrees
Out-of-Stock
Corrugated (structural) knee with PP DN 200 angle 45 degrees
Corrugated (structural) Elbow K2-Kan with a diameter of fi 200mm angle of 45 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
GASKET PP CORED Pipe DN 800mm
Out-of-Stock
GASKET PP CORED Pipe DN 800mm
A seal for the (corrugated) flow pipe K2-Kan with a diameter of fi 800mm, double-lip, with the Polish standard PN-EN 13476-3, in Black, is designed for the watertight joining of the pass pipes in the construction of sanitary and general sewer. Gasket made of the highest quality plastics, it is durable and tight in joints.
Details View details  
Fifth Wheel connection with PP DN 600-160mm
Out-of-Stock
Fifth Wheel connection with PP DN 600-160mm
The K2-Kan fifth Wheel connection, with a diameter of 600-160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the connection of mechanical pipes in the construction of sanitary and non-sewage sewer systems. The connection made of the highest quality plastic with gasket, is durable and tight in joints.
Details View details  
Passage tight corrugated (structural) with PP DN 800mm
Out-of-Stock
Passage tight corrugated (structural) with PP DN 800mm
The passage of a tight corrugated (structural) K2-Kan with an internal diameter of fi 800mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for a sealed connection of any type of sewer pipe, with Concrete wells. The transition made of the highest quality plastics without gasket, is durable and tight in joints.
Details View details  
Corrugated (structural) Reduction K2-Kan BK with PP DN 600/400mm
Out-of-Stock
Corrugated (structural) Reduction K2-Kan BK with PP DN 600/400mm
The corrugated (structural) reduction of the K2-Kan BK with a diameter of fi 600/400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  
Details View details  
Corrugated reduction (structural) with PP DN 500/300mm
Out-of-Stock
Corrugated reduction (structural) with PP DN 500/300mm
The corrugated (structural) reduction of K2-Kan with a diameter of fi 500/300mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and general sewage. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  
Details View details  
Corrugated (structural) cap with PP DN 800mm
Out-of-Stock
Corrugated (structural) cap with PP DN 800mm
A corrugated (structural) K2-Kan with a diameter of fi 800mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The cap is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Crimed coupling (structural) with PP DN 800mm
Out-of-Stock
Crimed coupling (structural) with PP DN 800mm
The K2-Kan corrugated (structural) coupling with a diameter of fi 800mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Flake Tee (structural) with PP DN 300/300 angle 90 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 300/300 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 300/300mm angle 90 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake Tee (structural) with PP DN 300/300 angle 45 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 300/300 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 300/300mm angle 45 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Corrugated (structural) knee with PP DN 200 angle 90 degrees
Out-of-Stock
Corrugated (structural) knee with PP DN 200 angle 90 degrees
Corrugated (structural) Elbow K2-Kan with a diameter of fi 200mm angle of 90 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
GASKET PP CORED Pipe DN 1000mm
Out-of-Stock
GASKET PP CORED Pipe DN 1000mm
A seal for the (corrugated) flow pipe K2-Kan with a diameter of fi 1000mm, double-lip, with the Polish standard PN-EN 13476-3, in black, is intended for the watertight joining of the pass pipes in the construction of sanitary and general sewer. Gasket made of the highest quality plastics, it is durable and tight in joints.
Details View details  
Fifth-wheel connection with PP DN 600-200mm
Out-of-Stock
Fifth-wheel connection with PP DN 600-200mm
The K2-Kan fifth Wheel connection with a diameter of 600-200mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the connection of mechanical pipes in the construction of sanitary and non-sewage sewer. The connection made of the highest quality plastic with gasket, is durable and tight in joints.
Details View details  
Transition tight Corrugated (structural) with PP DN 1000mm
Out-of-Stock
Transition tight Corrugated (structural) with PP DN 1000mm
The passage of a tight corrugated (structural) K2-Kan with an internal diameter of fi 1000mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for a sealed connection of any type of sewer pipe, with Concrete wells. The transition made of the highest quality plastics without gasket, is durable and tight in joints.
Details View details  
Corrugated reduction (structural) K2-Kan BK/KG with PP DN 600/315mm
Out-of-Stock
Corrugated reduction (structural) K2-Kan BK/KG with PP DN 600/315mm
The corrugated (structural) reduction of K2-Kan BK/KG with a diameter of fi 600/315mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  
Details View details  
Corrugated (structural) Reduction K2-Kan BK with PP DN 600/500mm
Out-of-Stock
Corrugated (structural) Reduction K2-Kan BK with PP DN 600/500mm
The corrugated (structural) reduction of the K2-Kan BK with a diameter of fi 600/500mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  
Details View details  
Corrugated reduction (structural) with PP DN 500/400mm
Out-of-Stock
Corrugated reduction (structural) with PP DN 500/400mm
The corrugated (structural) reduction of K2-Kan with a diameter of fi 500/400mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the flow pipes in the construction of sanitary and general sewer. The reduction made of the highest quality plastics without gasket, is durable and tight in joints.  
Details View details  
Corrugated (structural) cap with PP DN 1000mm
Out-of-Stock
Corrugated (structural) cap with PP DN 1000mm
A corrugated (structural) K2-Kan with a diameter of fi 1000mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The cap is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Crimed coupling (structural) with PP DN 1000mm
Out-of-Stock
Crimed coupling (structural) with PP DN 1000mm
The K2-Kan corrugated (structural) coupling with a diameter of fi 1000mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic without gaskets, is durable and tight in joints.
Details View details  
Flake Tee (structural) with PP DN 400/200 angle 90 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 400/200 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 400/200mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake Tee (structural) with PP DN 400/200 angle 45 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 400/200 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 400/200mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Corrugated (structural) elbow with PP DN 250 Angle 15 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 250 Angle 15 degree
Corrugated (structural) Elbow K2-Kan with diameter fi 250mm, angle 15 degrees, double-edging, with Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, it is designed for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details