Welded PPR Fittings

PP-R Welded fittings

Welded PPR fittings are designed for indoor installation. The system is based on grey or white fittings in diameters from fi 16mm to fi 90mm. Durability and usability make these products widely used in residential and general construction.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

Knee-length PP-R welded-WARRANTY 10 YEARS
Knee
Knee-length PP-R welded-10 YEARS WARRANTY
Knee-length Knees
Elbow GW PP-R welded-WARRANTY 10 YEARS
GW Knee
Knee GZ PP-R welded-10 YEARS WARRANTY
Elbow GZ
GW Knee Hanger PP-R welded-WARRANTY 10 YEARS
GW Knee Hanger
Elbow GZ Hanger PP-R welded-WARRANTY 10 YEARS
Elbow GZ Hanger
PP-R Welded Tees-10 YEARS WARRANTY
Tees
PP-R reducers Welded-10 YEARS WARRANTY
Reducers
T-Tees GW PP-R welded-10 YEARS WARRANTY
GW Tees
Tees GZ PP-R welded-10 YEARS WARRANTY
GZ Tees
PP-R Welded muffs-10 YEARS WARRANTY
Mufy
PP-R Reductive muffs-10 YEARS WARRANTY
Reductive
GW PP-R welded-WARRANTY 10 YEARS
GW
GZ PP-R welded-WARRANTY 10 YEARS
GZ
GW PP-R welding Machines-10 YEARS WARRANTY
GW screwers
Screws GZ PP-R welded-WARRANTY 10 YEARS
Screws GZ
Wall-mounted set PP-R welded-10 YEARS WARRANTY
Wall-mounted Set
PP-R welled semi-screws-10 YEARS WARRANTY
GW Semiscrews
Mounting plug PP-R welded-WARRANTY 10 YEARS
Mounting cap
Stopper GZ PP-R welded-WARRANTY 10 YEARS
Stopper GZ
Compensation PP-R welded-10 YEARS WARRANTY
Compensation
Diagonal filter PP-R welded-10 YEARS WARRANTY
Bevel Filter
PP-R Welded Mijanki-WARRANTY 10 YEARS
The Mijanki
PP-R Welded handles-10 YEARS WARRANTY
Handles
Flush-mounted ball valve PP-R welded-WARRANTY 10 YEARS
Flush-mounted ball valve
PP-R welded mushroom valve-10 YEARS WARRANTY
Mushroom valve
Ball Valves PP-R welded-WARRANTY 10 YEARS
Valves
PP-R Welded caps-10 YEARS WARRANTY
Caps
Welded reducer Tee PPR fi 50/16mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 50/16mm angle 90 degrees
Welded reduction tee with diameter fi 50/16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 50/20mm angle 90 degrees
Welded reducer Tee PPR fi 50/20mm angle 90 degrees
Welded reduction tee with a diameter of fi 50/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 50/25mm angle 90 degrees
Welded reducer Tee PPR fi 50/25mm angle 90 degrees
Welded reduction tee with diameter fi 50/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 50/32mm angle 90 degrees
Welded reducer Tee PPR fi 50/32mm angle 90 degrees
Welded reduction tee with diameter fi 50/32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 50/40mm angle 90 degrees
Welded reducer Tee PPR fi 50/40mm angle 90 degrees
Welded reduction tee with diameter fi 50/40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 63/32mm angle 90 degrees
Welded Reducer Tee PPR fi 63/32mm angle 90 degrees
Welded reduction tee with diameter fi 63/32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 63/40mm angle 90 degrees
Welded Reducer Tee PPR fi 63/40mm angle 90 degrees
Welded reduction tee with diameter fi 63/40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 63/50mm angle 90 degrees
Welded Reducer Tee PPR fi 63/50mm angle 90 degrees
Welded reduction tee with diameter fi 63/50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 75/25mm angle 90 degrees
Out-of-Stock
Welded Reducer Tee PPR fi 75/25mm angle 90 degrees
Welded reduction tee with a diameter of fi 75/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 75/32mm angle 90 degrees
Out-of-Stock
Welded Reducer Tee PPR fi 75/32mm angle 90 degrees
Welded reduction tee with a diameter of fi 75/32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 75/40mm angle 90 degrees
Welded Reducer Tee PPR fi 75/40mm angle 90 degrees
Welded reduction tee with a diameter of fi 75/40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 75/50mm angle 90 degrees
Out-of-Stock
Welded Reducer Tee PPR fi 75/50mm angle 90 degrees
Welded reduction tee with a diameter of fi 75/50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 75/63mm angle 90 degrees
Out-of-Stock
Welded Reducer Tee PPR fi 75/63mm angle 90 degrees
Welded reduction tee with a diameter of fi 75/63mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 90/50mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 90/50mm angle 90 degrees
Welded reduction tee with a diameter of fi 90/50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 90/63mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 90/63mm angle 90 degrees
Welded reduction tee with diameter fi 90/63mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 90/75mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 90/75mm angle 90 degrees
Welded reduction tee with a diameter of fi 90/75mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with external thread PPR fi 20x1/2 "mm angle 90 degrees
Tee with external thread PP-R fi 20x1/2
The tee with external thread diameter fi 20x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with external thread PPR fi 20x3/4 "mm angle 90 degrees
Tee with external thread PP-R fi 20x3/4
The tee with external thread diameter fi 20x3/4 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
External thread Tee PPR fi 25x1/2 "mm angle 90 degrees
Tee with external thread PP-R fi 25x1/2
Tee with external thread diameter fi 25x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
External thread Tee PPR fi 25x3/4 "mm angle 90 degrees
Tee with external thread PP-R fi 25x3/4
A tee with external thread of diameter fi 25x3/4 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with internal thread PPR fi 20x1/2 "mm angle 90 degrees
Tee with internal thread PP-R fi 20x1/2
Tee with inner thread diameter fi 20x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with internal thread PPR fi 20x3/4 "mm angle 90 degrees
Tee with internal thread PP-R fi 20x3/4
The tee with internal thread diameter fi 20x3/4 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with internal thread PPR fi 25x1/2 "mm angle 90 degrees
Tee with internal thread PP-R fi 25x1/2
Tee with inner thread diameter fi 25x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with internal thread PPR fi 25x3/4 "mm angle 90 degrees
Tee with internal thread PP-R fi 25x3/4
Tee with inner thread diameter fi 25x3/4 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Ball Valve PPR fi 25mm
Out-of-Stock
Ball valve PP-R fi 25mm
The ball valve, fi 25mm in diameter, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The ball valve made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Ball Valve PPR fi 32mm
Out-of-Stock
Ball valve PP-R fi 32mm
The ball valve with a diameter of fi 32mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The ball valve made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Ball Valve PPR fi 40mm
Out-of-Stock
Ball valve PP-R fi 40mm
The ball valve of the diameter fi 40mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The ball valve made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Ball Valve PPR fi 50mm
Ball valve PP-R fi 50mm
A ball valve with a diameter of fi 50mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The ball valve made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Screw with external thread PPR fi 20x3/4 "mm
Screw with external thread PP-R fi 20x3/4
Screw with external thread diameter fi 20x3/4 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Screw with external thread PPR fi 25x3/4 "mm
Screw with external thread PP-R fi 25x3/4
Screw with external thread diameter fi 25x3/4 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Screw with external thread PPR fi 25x1 "mm
Out-of-Stock
Screw with external thread PP-R fi 25x1
Screw with external thread diameter fi 25x1 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Screw with internal thread PPR fi 20x3/4 "mm
Out-of-Stock
Screw with internal thread PP-R fi 20x3/4
Screw with inner thread diameter fi 20x3/4 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Screw with internal thread PPR fi 25x3/4 "mm
Out-of-Stock
Screw with internal thread PP-R fi 25x3/4
Screw with internal thread fi 25x3/4 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Screw with internal thread PPR fi 25x1 "mm
Out-of-Stock
Screw with internal thread PP-R fi 25x1
Screw with inner thread diameter fi 25x1 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Welding Fittings PPR fi 25mm
Welding fittings PP-R fi 25mm
Welded fittings with a diameter of fi 25mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic fittings are durable and heat resistant. 
Details View details  
Semi-screw with internal thread PPR fi 25x1 "mm
Out-of-Stock
Semi-screw with internal thread PP-R fi 25x1
Semi-screw with inner thread diameter fi 25x1 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The semi-screw made of the highest quality plastics is durable and resistant to heat. 
Details View details