PP-R Welded fittings

Welded knee diameter fi 16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

Welded nipple with a diameter of fi 16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 

Welded tee with a diameter of fi 16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded reduction tee with a diameter of 20/16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 

A tee with external thread diameter fi 16x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded Knee diameter fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

A tee with internal thread of diameter fi 16x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 

Elbow with external thread of diameter fi 16x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 

Elbow with internal thread of diameter fi 16x1/2 ", angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 

Knee hanger with inner thread diameter fi 16x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 

Knee hanger with external thread diameter fi 16x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 

Welded Knee diameter fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

Welded Knee diameter fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

Welded knee diameter fi 40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

Welded Knee diameter fi 50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

Welded Knee diameter fi 63mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

Welded Knee diameter fi 75mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

Welded Knee diameter fi 90mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

Welded nipple with a diameter of fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 

Welded nipple with a diameter of fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 

Welded nipple with a diameter of fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 

Welded tee with a diameter of fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded tee with a diameter of fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded tee with a diameter of fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded tee with a diameter of fi 40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded tee with diameter fi 50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded tee with a diameter of fi 63mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded tee with a diameter of 75mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded tee with diameter fi 90mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded reduction tee with diameter fi 25/16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded reduction tee with a diameter of fi 25/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded reduction Tee with diameter fi 32/16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded reduction tee with a diameter of fi 32/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded reduction tee with a diameter of fi 32/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded reduction tee with a diameter of fi 40/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded reduction tee with diameter fi 40/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat.