Welded PPR Fittings

PP-R Welded fittings

Welded PPR fittings are designed for indoor installation. The system is based on grey or white fittings in diameters from fi 16mm to fi 90mm. Durability and usability make these products widely used in residential and general construction.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

Knee-length PP-R welded-WARRANTY 10 YEARS
Knee
Knee-length PP-R welded-10 YEARS WARRANTY
Knee-length Knees
Elbow GW PP-R welded-WARRANTY 10 YEARS
GW Knee
Knee GZ PP-R welded-10 YEARS WARRANTY
Elbow GZ
GW Knee Hanger PP-R welded-WARRANTY 10 YEARS
GW Knee Hanger
Elbow GZ Hanger PP-R welded-WARRANTY 10 YEARS
Elbow GZ Hanger
PP-R Welded Tees-10 YEARS WARRANTY
Tees
PP-R reducers Welded-10 YEARS WARRANTY
Reducers
T-Tees GW PP-R welded-10 YEARS WARRANTY
GW Tees
Tees GZ PP-R welded-10 YEARS WARRANTY
GZ Tees
PP-R Welded muffs-10 YEARS WARRANTY
Mufy
PP-R Reductive muffs-10 YEARS WARRANTY
Reductive
GW PP-R welded-WARRANTY 10 YEARS
GW
GZ PP-R welded-WARRANTY 10 YEARS
GZ
GW PP-R welding Machines-10 YEARS WARRANTY
GW screwers
Screws GZ PP-R welded-WARRANTY 10 YEARS
Screws GZ
Wall-mounted set PP-R welded-10 YEARS WARRANTY
Wall-mounted Set
PP-R welled semi-screws-10 YEARS WARRANTY
GW Semiscrews
Mounting plug PP-R welded-WARRANTY 10 YEARS
Mounting cap
Stopper GZ PP-R welded-WARRANTY 10 YEARS
Stopper GZ
Compensation PP-R welded-10 YEARS WARRANTY
Compensation
Diagonal filter PP-R welded-10 YEARS WARRANTY
Bevel Filter
PP-R Welded Mijanki-WARRANTY 10 YEARS
The Mijanki
PP-R Welded handles-10 YEARS WARRANTY
Handles
Flush-mounted ball valve PP-R welded-WARRANTY 10 YEARS
Flush-mounted ball valve
PP-R welded mushroom valve-10 YEARS WARRANTY
Mushroom valve
Ball Valves PP-R welded-WARRANTY 10 YEARS
Valves
PP-R Welded caps-10 YEARS WARRANTY
Caps
Welded elbow PPR fi 32mm angle 45 degrees
Out-of-Stock
Welded elbow PP-R fi 32mm angle 45 degrees
Welded Knee diameter fi 32mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PPR fi 40mm angle 45 degrees
Welded elbow PP-R fi 40mm angle 45 degrees
Welded knee diameter fi 40mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PPR fi 50mm angle 45 degrees
Welded elbow PP-R fi 50mm angle 45 degrees
Welded Knee diameter fi 50mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Knee PPR fi 63mm angle 45 degrees
Welded elbow PP-R fi 63mm angle 45 degrees
Welded Knee diameter fi 63mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Knee PPR fi 75mm angle 45 degrees
Out-of-Stock
Welded elbow PP-R fi 75mm angle 45 degrees
Welded Knee diameter fi 75mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PPR fi 90mm angle 45 degrees
Out-of-Stock
Welded elbow PP-R fi 90mm angle 45 degrees
Welded Knee diameter fi 90mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Studs PPR fi 20mm angle 90 degrees
Welded nylon PP-R fi 20mm angle 90 degrees
Welded nipple with a diameter of fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded nipple-Welding PPR fi 25mm angle 90 degrees
Out-of-Stock
Welded nipple PP-R fi 25mm angle 90 degrees
Welded nipple with a diameter of fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded PPR Fi 20mm
Welded PP-R fi 20mm
Welded with a diameter of fi 20mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded PPR Fi 25mm
Welded PP-R fi 25mm
Welded with a diameter of fi 25mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded Studs PPR fi 32mm angle 90 degrees
Out-of-Stock
Welded nipple PP-R fi 32mm angle 90 degrees
Welded nipple with a diameter of fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded PPR fi 32mm
Welded PP-R fi 32mm
Welded with a diameter of fi 32mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded PPR fi 40mm
Out-of-Stock
Welded PP-R fi 40mm
Welded with a diameter of fi 40mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded PPR Fi 50mm
Welded PP-R fi 50mm
Welded with a diameter of fi 50mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded Studs PPR fi 20mm angle 45 degrees
Welded nylon PP-R fi 20mm angle 45 degrees
Welded nipple with a diameter of fi 20mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded PPR fi 63mm
Welded PP-R fi 63mm
Welded with a diameter of fi 63mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded PPR Fi 75mm
Out-of-Stock
Welded PP-R fi 75mm
Welded with a diameter of fi 75mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded nipple-Welding PPR fi 25mm angle 45 degrees
Welded nipple PP-R fi 25mm angle 45 degrees
Welded nipple with a diameter of fi 25mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded PPR Fi 90mm
Out-of-Stock
Welded PP-R fi 90mm
Welded with a diameter of fi 90mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded Studs PPR fi 32mm angle 45 degrees
Welded nipple PP-R fi 32mm angle 45 degrees
Welded nipple with a diameter of fi 32mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 20mm angle 90 degrees
Welded Tee PP-R fi 20mm angle 90 degrees
Welded tee with a diameter of fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 25mm angle 90 degrees
Welded Tee PP-R fi 25mm angle 90 degrees
Welded tee with a diameter of fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 32mm angle 90 degrees
Welded Tee PP-R fi 32mm angle 90 degrees
Welded tee with a diameter of fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 40mm angle 90 degrees
Welded Tee PP-R fi 40mm angle 90 degrees
Welded tee with a diameter of fi 40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 50mm angle 90 degrees
Out-of-Stock
Welded Tee PP-R fi 50mm angle 90 degrees
Welded tee with diameter fi 50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 63mm angle 90 degrees
Welded Tee PP-R fi 63mm angle 90 degrees
Welded tee with a diameter of fi 63mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 75mm angle 90 degrees
Out-of-Stock
Welded Tee PP-R fi 75mm angle 90 degrees
Welded tee with a diameter of 75mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 90mm angle 90 degrees
Out-of-Stock
Welded Tee PP-R fi 90mm angle 90 degrees
Welded tee with diameter fi 90mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 25/16mm angle 90 degrees
Welded Reducer Tee PPR fi 25/16mm angle 90 degrees
Welded reduction tee with diameter fi 25/16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 25/20mm angle 90 degrees
Out-of-Stock
Welded Reducer Tee PPR fi 25/20mm angle 90 degrees
Welded reduction tee with a diameter of fi 25/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 32/16mm angle 90 degrees
Out-of-Stock
Welded Reducer Tee PPR fi 32/16mm angle 90 degrees
Welded reduction Tee with diameter fi 32/16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 32/20mm angle 90 degrees
Welded Reducer Tee PPR fi 32/20mm angle 90 degrees
Welded reduction tee with a diameter of fi 32/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 32/25mm angle 90 degrees
Out-of-Stock
Welded Reducer Tee PPR fi 32/25mm angle 90 degrees
Welded reduction tee with a diameter of fi 32/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 40/20mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 40/20mm angle 90 degrees
Welded reduction tee with a diameter of fi 40/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 40/25mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 40/25mm angle 90 degrees
Welded reduction tee with diameter fi 40/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 40/32mm angle 90 degrees
Welded reducer Tee PPR fi 40/32mm angle 90 degrees
Welded reduction tee with diameter fi 40/32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details