PE HD pressure Pipes and fittings

Pressure System PE

Pipes and fittings made of polyethylene PE HD 80, PE HD 100 and PE HD 100 RC are intended for m.in. For the construction of water networks, sewage networks and for transporting aggressive liquids. Pipes and fittings can be combined with the following methods: Butt welding, welding with electrofusion joints, and by means of clamping fittings.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

PE HD 80 pressure pipes for water mains.
PE HD 80 Tubes
PE HD 100 pressure pipes for water mains.
PE HD 100 Tubes
PE HD 100RC sandwich tubes for piping and sewer pipelines.
PE HD 100RC Tubes
Twisted Fittings PE
Twisted Fittings PE
PE HD 100 pressure fittings for water mains.
Segment PE Fittings
PE HD Butt Fittings
PE HD Butt Fittings
PE HD electrofusion Fittings
PE HD electrofusion Fittings

Active filters

Moulded arch PE100 PN 10 fi 63 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 63 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 32 Angle 11 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 32 Angle 11 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 75 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 75 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of 75mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 90 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 90 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of 90 mm, angle 11 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 110 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 110 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 110mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 125 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 125 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 125mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 140 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 140 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 140mm, angle 11 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 160 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 160 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 160mm, angle 11 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 180 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 180 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 180mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 200 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 200 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 200mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 225 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 225 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 225mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 250 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 250 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 250mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 280 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 280 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 280mm, angle 11 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 315 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 315 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 diameter fi 315mm, angle 11 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 355 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 355 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of 355mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 400 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 400 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 400mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 450 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 450 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 450mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 500 angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 500 angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 500mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 560 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 560 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 560mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 630 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 630 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 630mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 40 Angle 11 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 40 Angle 11 °
Moulded Arch PE 100, PN 16 SDR 11 diameter fi 40mm, angle 11 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 50 Angle 11 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 50 Angle 11°
Moulded Arch PE 100 PN 16 SDR 11 diameter fi 50mm, angle 11 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 63 Angle 11 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 63 Angle 11 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 63mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 110 Angle 11 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 110 Angle 11 °
Moulded Arch PE 100, PN 16 SDR 11 with a diameter of fi 110mm, an angle of 11 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 125 Angle 11 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 125 Angle 11 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 125mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 140 Angle 11 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 140 Angle 11 °
Moulded Arch PE 100, PN 16 SDR 11 with a diameter of fi 140mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 160 Angle 22 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 160 Angle 11 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 160mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 180 Angle 22 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 180 Angle 11 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 180mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 200 Angle 22 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 200 Angle 11 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 200mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 250 Angle 22 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 250 Angle 11 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 250mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 280 Angle 11 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 280 Angle 11 °
Moulded Arch PE 100, PN 16 SDR 11 with a diameter of fi 280mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 315 Angle 22 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 315 Angle 11 °
Moulded Arch PE 100 PN 16 SDR 11 diameter fi 315mm, angle 11 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 355 Angle 22 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 355 Angle 11 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of 355mm, angle 11 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 400 Angle 22 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 400 Angle 11 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 400mm, angle 11 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 500 angle 22 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 500 angle 11 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 500mm, angle 11 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 560 Angle 11 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 560 Angle 11 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 560mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details