PE HD pressure Pipes and fittings

Pressure System PE

Pipes and fittings made of polyethylene PE HD 80, PE HD 100 and PE HD 100 RC are intended for m.in. For the construction of water networks, sewage networks and for transporting aggressive liquids. Pipes and fittings can be combined with the following methods: Butt welding, welding with electrofusion joints, and by means of clamping fittings.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

PE HD 80 pressure pipes for water mains.
PE HD 80 Tubes
PE HD 100 pressure pipes for water mains.
PE HD 100 Tubes
PE HD 100RC sandwich tubes for piping and sewer pipelines.
PE HD 100RC Tubes
Twisted Fittings PE
Twisted Fittings PE
PE HD 100 pressure fittings for water mains.
Segment PE Fittings
PE HD Butt Fittings
PE HD Butt Fittings
PE HD electrofusion Fittings
PE HD electrofusion Fittings

Active filters

Extension Arch fi 630mm PN 16
Out-of-Stock
Extension Arch fi 630mm PN 16
The extension arch PN 16 SDR 11 with a diameter of fi 630mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Extension plug fi 630mm PN 16
Out-of-Stock
Extension plug fi 630mm PN 16
The extension Cap PN 16 SDR 11 with a diameter of fi 630mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Extension plug fi 630mm PN 10
Out-of-Stock
Extension plug fi 630mm PN 10
The extension Plug PN 10 SDR 17 with a diameter of fi 630mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Flanged Sleeve Extended fi 630mm PN 10
Out-of-Stock
Flanged Sleeve Extended fi 630mm PN 10
Flange Sleeve Extended PN 10 SDR 17 with a diameter of fi 630mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and sewage Social and cultural activities. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Flanged Sleeve Extended fi 630mm PN 16
Out-of-Stock
Flanged Sleeve Extended fi 630mm PN 16
Flange Sleeve Extended PN 16 SDR 11 with a diameter of fi 630mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and sewage Social and cultural activities. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Parallel Tee Y PE HD 100 PN 16 DN 630
Out-of-Stock
Parallel Tee Y PE HD 100 PN 16 DN 630
The parallel tee Y PE HD 100 PN 16 SDR 11 with a diameter of fi 630mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and sewage Social and cultural activities. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Parallel Tee Y PE HD 100 PN 10 DN 630
Out-of-Stock
Parallel Tee Y PE HD 100 PN 10 DN 630
The parallel tee Y PE HD 100 PN 10 SDR 17 with a diameter of fi 630mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and sewage Social and cultural activities. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 630 Angle 67 ° PN 16
Out-of-Stock
Segmented Tee angle fi 630 Angle 67 ° PN 16
Angular segment Tee PE HD 100 PN 10 SDR 17 with a diameter of fi 630mm, angle 67 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and of social and cultural wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 630 angle 45 ° PN 16
Out-of-Stock
Segmented Tee angle fi 630 angle 45 ° PN 16
Angular segment Tee PE HD 100 PN 10 SDR 17 with a diameter of fi 630mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and of social and cultural wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Sective four-segment fi 630 PN 16
Out-of-Stock
Sective four-segment fi 630 PN 16
Segmented four PN 16 SDR 17 with a diameter of fi 630mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Sective four-segment fi 630 PN 10
Out-of-Stock
Sective four-segment fi 630 PN 10
Segmented Quad PN 10 SDR 17 with a diameter of fi 630mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 630 Angle 67 ° PN 10
Out-of-Stock
Segmented Tee angle fi 630 Angle 67 ° PN 10
Angular segment Tee PE HD 100 PN 10 SDR 17 with a diameter of fi 630mm, angle 67 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and of social and cultural wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 630 angle 45 ° PN 10
Out-of-Stock
Segmented Tee angle fi 630 angle 45 ° PN 10
Angular segment Tee PE HD 100 PN 10 SDR 17 with a diameter of fi 630mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and of social and cultural wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented arc PE HD 100 PN 10 DN 630 Angle 90
Out-of-Stock
Segmented arc PE HD 100 PN 10 DN 630 Angle 90
Segmented arc PE HD 100 PN 10 SDR 17 with a diameter of fi 630mm, angle 90 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and sewage Social and cultural activities. The arches made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented arc PE HD 100 PN 10 DN 630 Angle 67
Out-of-Stock
Segmented arc PE HD 100 PN 10 DN 630 Angle 67
Segmented arc PE HD 100 PN 10 SDR 17 with a diameter of fi 630mm, angle 67 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and sewage Social and cultural activities. The arches made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented arc PE HD 100 PN 10 DN 630 Angle 45
Out-of-Stock
Segmented arc PE HD 100 PN 10 DN 630 Angle 45
Segmented arc PE HD 100 PN 10 SDR 17 with a diameter of fi 630mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and sewage Social and cultural activities. The arches made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented arc PE HD 100 PN 10 DN 630 Angle 30
Out-of-Stock
Segmented arc PE HD 100 PN 10 DN 630 Angle 30
Segmented arc PE HD 100 PN 10 SDR 17 with diameter fi 630mm, angle 30 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and sewage Social and cultural activities. The arches made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented arc PE HD PN 10 100 DN 630 Angle 15
Out-of-Stock
Segmented arc PE HD PN 10 100 DN 630 Angle 15
Segmented arc PE HD 100 PN 10 SDR 17 with diameter fi 630mm, angle 15 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and sewage Social and cultural activities. The arches made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Parallel Tee PE HD 100 PN 10 DN 630 Angle 90
Out-of-Stock
Parallel Tee PE HD 100 PN 10 DN 630 Angle 90
Parallel Tee PE HD 100 PN 10 SDR 17 with a diameter of fi 630mm, angle 90 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and of social and cultural wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Parallel Tee PE HD 100 PN 16 DN 630 Angle 90
Out-of-Stock
Parallel Tee PE HD 100 PN 16 DN 630 Angle 90
Parallel Tee PE HD 100 PN 16 SDR 11 with a diameter of fi 630mm, angle 90 degrees, with Polish standard PN-EN 1220-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and sewage Social and cultural activities. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Flanged Sleeve Extended fi 630mm PN 6
Out-of-Stock
Flanged Sleeve Extended fi 630mm PN 6
Flange Sleeve Extended PN 6 SDR 26 with a diameter of fi 630mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and sewage Social and cultural activities. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes
Details View details  
Extension plug fi 630mm PN 6
Out-of-Stock
Extension plug fi 630mm PN 6
The extension Cap PN 6 SDR 26 with a diameter of fi 630mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Electro-Fusion PE100 PN 10 fi 630
Out-of-Stock
Electro-Fusion PE100 PN 10 fi 630
Electrofusion PE 100 PN 10 SDR 11 with diameter fi 630mm, with standard < SMr > EN1555 i EN12201, wykonana z polietylenu (PE) w kolorze czarnym, przeznaczona jest do skutecznego i racjonalnego pod względem ekonomicznym tworzenia sieci i systemów rurociągowych. Mufy wykonane z tworzyw najwyższej jakości, przy użyciu środków pomocniczych, powodują iż połączenia stają się stosunkowo proste.
Details View details  
Electro-Fusion PE100 PN 16 fi 630mm
Out-of-Stock
Electro-Fusion PE100 PN 16 fi 630mm
Electrofusion PE 100 PN 16 SDR 11 with diameter fi 630mm, with standard < SMr > EN1555 i EN12201, wykonana z polietylenu (PE) w kolorze czarnym, przeznaczona jest do skutecznego i racjonalnego pod względem ekonomicznym tworzenia sieci i systemów rurociągowych. Mufy wykonane z tworzyw najwyższej jakości, przy użyciu środków pomocniczych, powodują iż połączenia stają się stosunkowo proste.
Details View details  
Butt elbow Long PE100 PN 10 fi 630 Angle 90 °
Out-of-Stock
Butt elbow Long PE100 PN 10 fi 630 Angle 90 °
The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 560mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt Knee Long PE100 PN 16 fi 630 Angle 90 °
Out-of-Stock
Butt Knee Long PE100 PN 16 fi 630 Angle 90 °
Butt elbow Long PE 100 DIN 16 SDR 11 with a diameter of fi 630mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 630 Angle 90 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 630 Angle 90 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 630mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 630 angle 60 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 630 angle 60 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 630mm, angle 60 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 630 Angle 45 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 630 Angle 45 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 630mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 630 Angle 30 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 630 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 630mm, an angle of 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 630 Angle 22 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 630 Angle 22 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 630mm, angle 22 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 630 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 630 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 630mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 630 Angle 90 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 630 Angle 90 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 630mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 630 angle 60 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 630 angle 60 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 630mm, angle 60 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 630 Angle 45 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 630 Angle 45 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 630mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 630 Angle 30 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 630 Angle 30 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 630mm, an angle of 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details