PE HD pressure Pipes and fittings

Pressure System PE

Pipes and fittings made of polyethylene PE HD 80, PE HD 100 and PE HD 100 RC are intended for m.in. For the construction of water networks, sewage networks and for transporting aggressive liquids. Pipes and fittings can be combined with the following methods: Butt welding, welding with electrofusion joints, and by means of clamping fittings.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

PE HD 80 pressure pipes for water mains.
PE HD 80 Tubes
PE HD 100 pressure pipes for water mains.
PE HD 100 Tubes
PE HD 100RC sandwich tubes for piping and sewer pipelines.
PE HD 100RC Tubes
Twisted Fittings PE
Twisted Fittings PE
PE HD 100 pressure fittings for water mains.
Segment PE Fittings
PE HD Butt Fittings
PE HD Butt Fittings
PE HD electrofusion Fittings
PE HD electrofusion Fittings

Active filters

Sectional Tee Angle Reduction fi 225/225/63mm Angle 67 ° PN 10
Out-of-Stock
Sectional Tee Angle Reduction fi 225/225/63mm Angle 67 ° PN 10
Segmented tee Angled reducing PE HD 100 PN 10 SDR 17 with a diameter of fi 225/225/63mm, angle 67 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is intended for the transmission of treated Drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/160 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 250/250/160 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 250/250/160mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/125 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 250/250/125 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 250/250/125mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/110 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 250/250/110 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 250/250/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/90 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 250/250/90 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 250/250/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/160 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 225/225/160 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 225/225/160mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/125 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 225/225/125 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 225/225/125mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/110 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 225/225/110 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 225/225/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/90 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 225/225/90 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 225/225/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/160 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 200/200/160 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 200/200/160mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/125 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 200/200/125 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 200/200/125mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/110 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 200/200/110 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 200/200/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/90 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 200/200/90 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 200/200/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 180/180/110 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 180/180/110 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 180/180/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 180/180/90 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 180/180/90 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 180/180/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 160/160/110 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 160/160/110 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 160/160/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 160/160/90 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 160/160/90 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 160/160/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 125/125/110 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 125/125/110 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 125/125/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 125/125/90 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 125/125/90 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 125/125/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/160 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 250/250/160 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 250/250/160mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/125 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 250/250/125 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 250/250/125mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/110 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 250/250/110 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 250/250/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/90 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 250/250/90 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 250/250/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/160 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 225/225/160 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 225/225/160mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/125 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 225/225/125 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 225/225/125mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/110 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 225/225/110 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 225/225/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/90 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 225/225/90 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 225/225/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/160 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 200/200/160 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 200/200/160mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/125 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 200/200/125 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 200/200/125mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/110 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 200/200/110 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 200/200/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/90 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 200/200/90 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 200/200/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 180/180/110 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 180/180/110 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 180/180/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 160/160/110 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 180/180/90 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 180/180/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 160/160/110 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 160/160/110 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter fi 160/160/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 160/160/90 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 160/160/90 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter fi 160/160/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 125/125/110 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 125/125/110 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 125/125/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details