Home

GASKET for the sand-proof coupling of your system to a corrugated double-layer casing. The coupling is made  z tworzyw najwyższej jakości, co gwarantuje funkcjonowanie instalacji przez okres wielu lat.

Sewer pipe (solid) with a diameter of fi 110mm, with a cup and seal DIN-LOCK, with a wall of 4, 2mm in length of 3 meters, with the Polish norm PN EN 1852-1, made of PP polypropylene, type heavy SN10, in Orange, is designed for draining Impurities outside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to chemical substances.
LThe most s

Thermal insulation cover with an inner diameter of 15mm, with a wall of 6mm, with Polish standard PN-EN 14313, made of ecologically foamed PE polyethylene in grey, produced in sections 2m, is designed for insulation of sanitary pipes, heating, Air conditioning, refrigeration and piping of steel, copper and plastic, installed in residential, administrative and industrial buildings. Thermal insulat

Home Sewage Treatment Plant (tank without kit) 2000 liters is suitable for 2 to 4 people, with the Polish standard EN 12566-1:2000/A1:2003, made of PEHD polyethylene in blue, green or black, is intended for wastewater treatment From residential buildings or several farms and allows them to be put in a purified state into the ground. 

Protective pipe with a diameter of 75mm, with a wall of 2, 0mm with a length of 3 meters, with Polish norm PN EN 50086, made of polyvinyl chloride PVC-U in grey, is intended for the protection of telecommunications cables, electrical power, signalling as Primary sewerage. Pipes made of high-quality plastics with or without muel are characterized by greater resistance to stroke. 

Welded knee diameter fi 16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

Welded STABI pipe with glass fibre PN-20 with a diameter of fi 20mm, with a wall of 2, 8mm with a length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings.  Tub

Corrugated pipe (structural) with an internal diameter of fi 200mm with a length of 6 meters, with the Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy-duty type SN 8, in Orange, is designed for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.

Reduction Tee PE HD 100 PN 10 SDR 17 diameter FI 225/225/160mm, angle 90 degrees, with Polish standard < span>PN-EN 1220-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

Reduction Tee PE HD 100 PN 10 SDR 17 diameter FI 200/200/90mm, angle 90 degrees, with Polish standard < span>PN-EN 1220-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

Parallel Tee PE HD 100 PN 10 SDR 17 with a diameter of fi 125mm, angle 90 degrees, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and of social and cultural wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

Drain pipe with 50mm diameter of 50MB, with Polish norm PN-C-89221:1998/AZ1, made of polyvinyl chloride PVC-U in yellow, is intended for drainage of land and areas around buildings and fields of sports pitches, farmlands, etc. Pipes made of the highest quality materials guarantee the protection against inflow of water in all areas of construction. 

The elbow of the drain pipe of the diameter fi 90mm, the angle of 67 degrees, with the Polish standard PN-EN 607, made of polyvinyl chloride PVC-U in brown color, is intended for joining drain pipes, drainage buildings, residential buildings and more. The knee made of the highest quality plastic is tight in joints, durable, resistant to corrosion and impurities contained in the atmosphere.

The 125mm "Dagmara" semi-circular guttor with a length of 3 meters, with Polish standard PN-EN 607, made of PVC-U polyvinyl chloride in brown, is designed for dewatering houses, residential buildings, industrial facilities, garages and more. The high-quality plastic trough has a profile exwinsion that enhances stiffness, durability and aesthetics.

The microprocessor-based boiler work regulator is one of the most modern and economical controllers in the market. Thanks to the PID algorithm, it allows remote maintenance of the indicated temperature by controlling and regulating the operation of the blower and circulating pump of the central heating.

Temperature control device for solid fuel boilers. It is an ideal alternative to electronic controllers. Easy to assemble and easy to operate, it stabilizes and improves the heating process making it more economical.

Equipment type RV-05w aluminum alloy enclosure, designed for air supply to the heating boiler's hearth chambers. It can be used for general ventilation of premises and equipment, requiring constant air circulation. 

The sewer pipe (solid) with a diameter of fi 200mm, with a wall of 3, 9mm with a length of 6 meters, with the Polish norm PN EN 1329-1, made of poly (vinyl chloride) PVC, light type SN2, in Orange, is designed for draining the impurities outside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to chemical substances.
Longer lengths of pipe

Sewer pipe with a diameter of 2, 2mm with a length of 6 meters, with Polish standard PN-EN 12200, made of polyvinyl chloride PVC-U in grey, is intended for draining of impurities inside the building and in underground systems. Pipes made of the highest quality plastic with a cup and gasket, can be combined with a wide range of sewer fittings.

Pressure Pipe PN-6 with a diameter of 90mm, with a wall of 2, 7mm with a length of 3 meters, with Polish standard PN-EN ISO 1452-2, made of polyvinyl chloride PVC-U in black, is intended for the transmission of treated drinking water and social-household sewage. Pipes made of the highest quality plastic with a cup and gasket, can be combined with a wide range of pressure fittings.

Extension Arch PN 16 SDR 11 with a diameter of fi 1000mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

Extension Arch PN 16 SDR 11 with a diameter of fi 900mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

Extension Arch PN 16 SDR 11 with a diameter of fi 800mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

Extension Arch PN 16 SDR 11 with a diameter of fi 710mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

The extension arch PN 16 SDR 11 with a diameter of fi 630mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

The extension arch PN 16 SDR 11 with a diameter of fi 560mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

The extension arch PN 16 SDR 11 with a diameter of fi 500mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

Extension Arch PN 16 SDR 11 with a diameter of fi 450mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

Extension Arch PN 16 SDR 11 with a diameter of fi 400mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

The extension arch PN 16 SDR 11 with a diameter of fi 355mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

Extension Arch PN 16 SDR 11 with a diameter of fi 315mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

The extension arch PN 16 SDR 11 with a diameter of fi 280mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

Extension Arch PN 16 SDR 11 with a diameter of fi 250mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

The extension arch PN 16 SDR 11 with a diameter of fi 225mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

Extension Arch PN 16 SDR 11 with a diameter of fi 200mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.

Extension Arch PN 16 SDR 11 with a diameter of fi 180mm, with the Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transfer of treated drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.