Welded PPR Fittings

PP-R Welded fittings

Welded PPR fittings are designed for indoor installation. The system is based on grey or white fittings in diameters from fi 16mm to fi 90mm. Durability and usability make these products widely used in residential and general construction.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

Knee-length PP-R welded-WARRANTY 10 YEARS
Knee
Knee-length PP-R welded-10 YEARS WARRANTY
Knee-length Knees
Elbow GW PP-R welded-WARRANTY 10 YEARS
GW Knee
Knee GZ PP-R welded-10 YEARS WARRANTY
Elbow GZ
GW Knee Hanger PP-R welded-WARRANTY 10 YEARS
GW Knee Hanger
Elbow GZ Hanger PP-R welded-WARRANTY 10 YEARS
Elbow GZ Hanger
PP-R Welded Tees-10 YEARS WARRANTY
Tees
PP-R reducers Welded-10 YEARS WARRANTY
Reducers
T-Tees GW PP-R welded-10 YEARS WARRANTY
GW Tees
Tees GZ PP-R welded-10 YEARS WARRANTY
GZ Tees
PP-R Welded muffs-10 YEARS WARRANTY
Mufy
PP-R Reductive muffs-10 YEARS WARRANTY
Reductive
GW PP-R welded-WARRANTY 10 YEARS
GW
GZ PP-R welded-WARRANTY 10 YEARS
GZ
GW PP-R welding Machines-10 YEARS WARRANTY
GW screwers
Screws GZ PP-R welded-WARRANTY 10 YEARS
Screws GZ
Wall-mounted set PP-R welded-10 YEARS WARRANTY
Wall-mounted Set
PP-R welled semi-screws-10 YEARS WARRANTY
GW Semiscrews
Mounting plug PP-R welded-WARRANTY 10 YEARS
Mounting cap
Stopper GZ PP-R welded-WARRANTY 10 YEARS
Stopper GZ
Compensation PP-R welded-10 YEARS WARRANTY
Compensation
Diagonal filter PP-R welded-10 YEARS WARRANTY
Bevel Filter
PP-R Welded Mijanki-WARRANTY 10 YEARS
The Mijanki
PP-R Welded handles-10 YEARS WARRANTY
Handles
Flush-mounted ball valve PP-R welded-WARRANTY 10 YEARS
Flush-mounted ball valve
PP-R welded mushroom valve-10 YEARS WARRANTY
Mushroom valve
Ball Valves PP-R welded-WARRANTY 10 YEARS
Valves
PP-R Welded caps-10 YEARS WARRANTY
Caps
Elbow with internal thread PP fi 32x3/4 "
Elbow with internal thread PP-R fi 32x3/4
A knee with an inner thread with a diameter of fi 32x3/4 ", an angle of 90 degrees, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for the installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Elbow with internal thread PP fi 32x1 "
Out-of-Stock
Elbow with internal thread PP-R fi 32x1
The knee with an inner thread of diameter fi 32x1 ", angle 90 degrees, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for the installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Holder fi 25mm
Out-of-Stock
Holder fi 25mm
The holder fi 25mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating inside the building. The handle made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Holder fi 32mm
Holder fi 32mm
The holder fi 32mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating inside the building. The handle made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Holder fi 40mm
Holder fi 40mm
The holder fi 40mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating inside the building. The handle made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Holder fi 50mm
Holder fi 50mm
The holder fi 50mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating inside the building. The handle made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Fi 63mm Holder
Fi 63mm Holder
The fi 63mm holder, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating inside the building. The handle made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Holder fi 75mm
Out-of-Stock
Holder fi 75mm
The holder fi 75mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating inside the building. The handle made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Wall mounting set with internal thread PPR fi 20x1/2 "mm
Wall mounting set with internal thread PP-R fi 20x1/2
Wall-mounted set with internal thread fi 20x1/2 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) with connection to the wall battery in grey or white, is designed for the installation of hot water transmission and cold Inside the building to be mounted under plaster. The wall-mounted set made of the highest quality plastic is durable.
Details View details  
Mounting cap fi 20mm (blue)
Out-of-Stock
Mounting cap fi 20mm (blue)
The mounting plug with a diameter of fi 20mm, with the Polish standard PN-EN ISO 15874-2:2005, made of plastic with a connection to the wall battery in blue, is designed for testing pressure tightness inside the building. Cork made of the highest quality plastic is durable.
Details View details  
Mounting cap fi 20mm (red)
Mounting cap fi 20mm (red)
The mounting plug with a diameter of fi 20mm, with the Polish standard PN-EN ISO 15874-2:2005, made of plastic with a connection to the wall battery in red, is designed for testing pressure tightness inside the building. Cork made of the highest quality plastic is durable.
Details View details  
Welded four-piece PPR fi 20mm angle 90 degrees
Out-of-Stock
Welded four-piece PPR fi 20mm angle 90 degrees
Welded four-diameter fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The four-piece made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded four-wire PPR fi 25mm angle 90 degrees
Out-of-Stock
Welded four-wire PPR fi 25mm angle 90 degrees
Welded four-diameter fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The four-piece made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded four-wire PPR fi 32mm angle 90 degrees
Out-of-Stock
Welded four-wire PPR fi 32mm angle 90 degrees
Welded four-diameter fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The four-piece made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Mounting plate for PP-R system
Out-of-Stock
Mounting plate for PP-R system
Small mounting plate. Mounting plate for knees GW and GZ With Hanger, Which  is used to precisely distribute the knees to fit the For the installation of faucet or screw-in tap. It weighs the element to make the installation of the Crane ran Without additional complications związanych z prawidłowym rozstawieniem gwintów podłączeniowych.The sheets have two sizes: Big  - typowa dla standartowych kr
Details View details  
Welded elbow PPR fi 90mm angle 90 degrees
Out-of-Stock
Welded elbow PP-R fi 110mm angle 90 degrees
Welded Knee diameter fi 110mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PPR fi 90mm angle 45 degrees
Out-of-Stock
Welded elbow PP-R fi 110mm angle 45 degrees
Welded Knee diameter fi 110mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded PPR Fi 110mm
Out-of-Stock
Welded PP-R fi 110mm
Welded with a diameter of fi 110mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded reduction PPR fi 110/50mm
Welded reduction PPR fi 110/50mm
The welded reduction with a diameter of fi 110/50mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded reduction PPR fi 110/63mm
Out-of-Stock
PP-R fi 110/63mm Welded reduction
Welded reduction with a diameter of fi 110/63mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded reduction PPR fi 110/75mm
Out-of-Stock
PP-R fi 110/75mm welded reduction
Welded reduction with a diameter of fi 110/75mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded reduction PPR fi 110/90mm
Out-of-Stock
PP-R fi 110/90mm welded reduction
Welded reduction with a diameter of fi 110/90mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
with internal thread PP-R fi 110x4 mm
Out-of-Stock
with internal thread PP-R fi 110x4
with internal thread fi 110x4 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Details View details  
with external thread PPR fi 75x2
Out-of-Stock
with external thread PP-R fi 75x2, 1/2
with external thread with a diameter of fi 75x2, 1/2, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 110mm angle 90 degrees
Out-of-Stock
Welded Tee PP-R fi 110mm angle 90 degrees
Welded tee with a diameter of fi 110mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 110/50mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 110/50mm angle 90 degrees
Welded reduction tee with a diameter of fi 110/50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 110/75mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 110/75mm angle 90 degrees
Welded reduction tee with a diameter of fi 110/75mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 110/63mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 110/63mm angle 90 degrees
Welded reduction tee with a diameter of fi 110/63mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 110/90mm angle 90 degrees
Out-of-Stock
Welded reducer Tee PPR fi 110/90mm angle 90 degrees
Welded reduction tee with a diameter of fi 110/90mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
PPR fi 110mm Plug
Out-of-Stock
PP-R plug fi 110mm
PPR fi 110mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant. 
Details View details  
Compensation PP-R fi 20mm
Compensation PP-R fi 20mm
Welded compensation with a diameter of fi 20mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. Loop compensation for thermal elongation is made of the highest quality plastics.
Details View details  
Compensation PP-R fi 25mm
Compensation PP-R fi 25mm
Welded compensation with a diameter of fi 25mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. Loop compensation for thermal elongation is made of the highest quality plastics.
Details View details  
Compensation PP-R fi 32mm
Compensation PP-R fi 32mm
Welded compensation with a diameter of fi 32mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. Loop compensation for thermal elongation is made of the highest quality plastics.
Details View details  
Compensation PP-R fi 40mm
Out-of-Stock
Compensation PP-R fi 40mm
Welded compensation of the diameter fi 40mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. Loop compensation for thermal elongation is made of the highest quality plastics.
Details View details  
Flush-mounted ball valve PP-R fi 20mm
Flush-mounted ball valve PP-R fi 20mm
Flush-mounted ball valve with a diameter of fi 20mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The top-quality flush-mounted ball valve is durable and heat resistant. 
Details View details  
Flush-mounted ball valve PP-R fi 25mm
Flush-mounted ball valve PP-R fi 25mm
Flush-mounted ball valve with diameter fi 25mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The top-quality flush-mounted ball valve is durable and heat resistant. 
Details View details