PN 10

The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 63mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 50mm with standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 63mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Reducing tee PE100 PN 10 SDR 17 with a diameter of fi 63/50mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 75mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 90mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 75mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 63mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 110mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 90mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of 75mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 125mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 110mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 90mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 140mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 125mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of 75mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 90mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 160mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 140mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of 90 mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 125mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 180mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 160mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 110mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 140mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 200mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 180mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 125mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 160mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 225mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 200mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 140mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 180mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 250mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.