Internal sewerage-PP and PVC pipes and fittings

Internal Sewer System

Internal sewage with PVC and PP is designed for installation of sewer inside the building. The system is based on pipes and fittings in grey or white in diameters from fi 32mm to fi 110mm. Durability and usability make our products widely used in residential and general construction.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

PVC internal sewage pipes from fi 32 to fi 110mm
PVC Sewer Pipes
Sewage pipes PP Internal from fi 32 to fi 110mm
PP Sewer Pipes
PP Sewer Fittings from fi 32 to fi 110mm
Sewer Fittings
Pipe PEX/AL/PE fi 20x2, 0mm
Pipe PEX/AL/PE fi 20x2, 0mm
Multilayer pressure pipe with a diameter of fi 20mm, with a wall of 2, 0mm with a maximum pressure of 1 MPa (10 bar), in a standard length of 100MB, with the Polish standard PN-EN ISO 21003. Made of polyethylene (PEX), aluminium (AL), polyethylene (PE), white, it is intended for installation in systems for the transmission of water for consumption, for economic purposes and in heating systems (CO
Details View details  
Sewer pipe with PP DN 110x2, 7x6000mm (internal)
Out-of-Stock
Sewer pipe with PP-H fi 110x2, 7x6000mm
Sewer pipe with a diameter of 2, 7mm with a length of 6 meters, with Polish norm PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat.
Details View details  
Sewer Tee DN 75/75 angle 90 degrees (internal)
Sewer Tee fi 75/75 angle 90 degrees
The sewer tee with a diameter of fi 75/75mm, with a wall of 1, 9mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 75 angle 45 degrees (internal)
Sewer Knee fi 75 angle 45 degrees
The sewer knee with a diameter of fi 75mm, with a wall of 1, 9mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Pipe PEX/AL/PE fi 25x 2.5 mm
Pipe PEX/AL/PE fi 25x 2.5 mm
Multilayer pressure pipe with a diameter of fi 25mm, with a wall of 2, 5mm with a maximum pressure of 1 MPa (10 bar), in a standard length of 50MB, with the Polish standard PN-EN ISO 21003. Made of polyethylene (PEX), aluminium (AL), polyethylene (PE), white, it is intended for installation in systems for the transmission of water for consumption, for economic purposes and in heating systems (CO)
Details View details  
Sewer Tee DN 75/75 angle 67 degrees (internal)
Sewer Tee fi 75/75 angle 67 degrees
The sewer tee with a diameter of fi 75/75mm, with a wall of 1, 9mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 75 Angle 30 degree (internal)
Sewer Knee fi 75 angle 30 degrees
The sewer knee with a diameter of fi 75mm, with a wall of 1, 9mm, an angle of 30 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Details View details  
Sewer Tee DN 75/75 angle 45 degrees (internal)
Sewer Tee fi 75/75 angle 45 degrees
The sewer tee with a diameter of fi 75/75mm, with a wall of 1, 9mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 50 angle 90 degrees (internal)
Sewer Knee fi 50 angle 90 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Details View details  
Sewer Tee DN 75/50 angle 90 degrees (internal)
Sewer Tee fi 75/50 angle 90 degrees
The sewer tee with a diameter of fi 75/50mm, with a wall of 1, 8mm angle of 90 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 50 angle 67 degrees (internal)
Sewer Knee fi 50 angle 67 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left"> 
Details View details  
Sewer Knee DN 50 angle 45 degrees (internal)
Sewer Knee fi 50 angle 45 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left"> 
Details View details  
Sewer Tee DN 75/50 angle 67 degrees (internal)
Sewer Tee fi 75/50 angle 67 degrees
The sewer tee with a diameter of fi 75/50mm, with a wall of 1, 8mm angle of 67 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Tee DN 75/50 angle 45 degrees (internal)
Sewer Tee fi 75/50 angle 45 degrees
The sewer tee with a diameter of fi 75/50mm, with a wall of 1, 8mm angle of 45 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.  
Details View details  
Sewer Knee DN 50 Angle 30 degree (internal)
Sewer Knee fi 50 angle 30 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 30 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Tee DN 50/50 angle 90 degrees (internal)
Sewer Tee fi 50/50 angle 90 degrees
Sewer tee with diameter fi 50/50mm, with wall 1, 8mm angle 90 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, it is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 50 Angle 22 degree (internal)
Sewer Knee fi 50 angle 22 degree
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 22 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Tee DN 50/50 angle 67 degrees (internal)
Sewer Tee fi 50/50 angle 67 degrees
Sewer tee with diameter fi 50/50mm, with wall 1, 8mm angle 67 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, it is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 50 Angle 15 degree (internal)
Sewer Knee fi 50 angle 15 degree
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 15 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left"> 
Details View details  
Sewer Tee DN 50/50 angle 45 degrees (internal)
Sewer Tee fi 50/50 angle 45 degrees
Sewer tee with diameter fi 50/50mm, with wall 1, 8mm angle 45 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, it is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 40 angle 90 degrees (internal)
Sewer Knee fi 40 angle 90 degrees
The sewer knee with the diameter of fi 40mm, with a wall of 1, 8mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Details View details  
Sewer Tee DN 40/40 angle 90 degrees (internal)
Sewer Tee fi 40/40 angle 90 degrees
The sewer tee with a diameter of fi 40/40mm, with a wall of 1, 8mm angle of 90 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 40 angle 45 degrees (internal)
Sewer Knee fi 40 angle 45 degrees
The sewer knee with the diameter of fi 40mm, with a wall of 1, 8mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Tee DN 40/40 angle 45 degrees (internal)
Sewer Tee fi 40/40 angle 45 degrees
The sewer tee with a diameter of fi 40/40mm, with a wall of 1, 8mm angle of 45 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 32 angle 90 degrees (internal)
Sewer Knee fi 32 angle 90 degrees
The sewer knee with a diameter of fi 32mm, with a wall of 1, 8mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" > 
Details View details  
Sewer Knee DN 32 angle 67 degrees (internal)
Sewer Knee fi 32 angle 67 degrees
The sewer knee with a diameter of fi 32mm, with a wall of 1, 8mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" > 
Details View details  
Sewer Tee DN 32/32 angle 90 degrees (internal)
Sewer Tee fi 32/32 angle 90 degrees
A sewer tee with a diameter of fi 32/32mm, with a wall of 1, 8mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Tee DN 32/32 angle 45 degrees (internal)
Sewer Tee fi 32/32 angle 45 degrees
A sewer tee with a diameter of fi 32/32mm, with a wall of 1, 8mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 32 angle 45 degrees (internal)
Sewer Knee fi 32 angle 45 degrees
The sewer knee with a diameter of fi 32mm, with a wall of 1, 8mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" > 
Details View details  
Sewer Tee DN 32/32 angle 67 degrees (internal)
Sewer Tee fi 32/32 angle 67 degrees
A sewer tee with a diameter of fi 32/32mm, with a wall of 1, 8mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 32 Angle 30 degree (internal)
Sewer Knee fi 32 angle 30 degrees
The sewer knee with a diameter of fi 32mm, with a wall of 1, 8mm angle of 30 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" > 
Details View details  
Reducing sewage elbow DN 110/50 Angle 90 degrees (internal)
Sewer-Reducing elbow fi 110/50 angle 90 degrees
Pressure-reducing elbow with a diameter of fi 110/50mm, with a wall of 2, 7mm angle 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining Impurities inside the building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" > 
Details View details