Internal sewerage-PP and PVC pipes and fittings

Internal Sewer System

Internal sewage with PVC and PP is designed for installation of sewer inside the building. The system is based on pipes and fittings in grey or white in diameters from fi 32mm to fi 110mm. Durability and usability make our products widely used in residential and general construction.

Subcategories

PVC internal sewage pipes from fi 32 to fi 110mm

PVC Sewer Pipes

Sewage pipes PP Internal from fi 32 to fi 110mm

PP Sewer Pipes

PP Sewer Fittings from fi 32 to fi 110mm

Sewer Fittings

Sort by:

View

There are 112 products.

Sewer Knee DN 110 angle 90 degrees (internal)

Sewer Knee fi 110 angle 90 degrees

The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.

Details View details

Sewer Knee DN 110 angle 67 degrees (internal)

Sewer Knee fi 110 angle 67 degrees

The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.

Details View details

Sewer Knee DN 110 angle 45 degrees (internal)

Sewer Knee fi 110 angle 45 degrees

The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.

Details View details

Sewer Knee DN 110 Angle 30 degree (internal)

Sewer Knee fi 110 angle 30 degrees

The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm, an angle of 30 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining dirt inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.

Details View details

Sewer Knee DN 110 Angle 22 degree (internal)

Sewer Knee fi 110 Angle 22 degree

The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 22 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.

Details View details

Sewer Knee DN 110 Angle 15 degree (internal)

Sewer Knee fi 110 Angle 15 degree

The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle of 15 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.

Details View details

Sewer Knee DN 75 angle 90 degrees (internal)

Sewer Knee fi 75 angle 90 degrees

The sewer knee with a diameter of fi 75mm, with a wall of 1, 9mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.

Details View details

Sewer Knee DN 75 angle 67 degrees (internal)

Sewer Knee fi 75 angle 67 degrees

The sewer knee with a diameter of fi 75mm, with a wall of 1, 8mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.

Details View details

Sewer Knee DN 75 angle 45 degrees (internal)

Sewer Knee fi 75 angle 45 degrees

The sewer knee with a diameter of fi 75mm, with a wall of 1, 9mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.

Details View details

Sewer Knee DN 75 Angle 30 degree (internal)

Sewer Knee fi 75 angle 30 degrees

The sewer knee with a diameter of fi 75mm, with a wall of 1, 9mm, an angle of 30 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.

Details View details

Sewer Knee DN 50 angle 90 degrees (internal)

Sewer Knee fi 50 angle 90 degrees

The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.

Details View details

Sewer Knee DN 50 angle 67 degrees (internal)

Sewer Knee fi 50 angle 67 degrees

The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left">

Details View details

Sewer Knee DN 40 angle 45 degrees (internal)

Sewer Knee fi 40 angle 45 degrees

The sewer knee with the diameter of fi 40mm, with a wall of 1, 8mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.

Details View details

Sewer Knee DN 50 Angle 30 degree (internal)

Sewer Knee fi 50 angle 30 degrees

The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 30 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.

Details View details

Sewer Knee DN 50 Angle 22 degree (internal)

Sewer Knee fi 50 angle 22 degree

The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 22 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.

Details View details

Sewer Knee DN 50 Angle 15 degree (internal)

Sewer Knee fi 50 angle 15 degree

The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 15 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left">

Details View details

Sewer Knee DN 32 angle 90 degrees (internal)

Sewer Knee fi 32 angle 90 degrees

The sewer knee with a diameter of fi 32mm, with a wall of 1, 8mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" >

Details View details

Sewer Knee DN 32 angle 45 degrees (internal)

Sewer Knee fi 32 angle 45 degrees

The sewer knee with a diameter of fi 32mm, with a wall of 1, 8mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" >

Details View details

Reducing sewage elbow DN 110/50 Angle 90 degrees (internal)

Sewer-Reducing elbow fi 110/50 angle 90 degrees

Pressure-reducing elbow with a diameter of fi 110/50mm, with a wall of 2, 7mm angle 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining Impurities inside the building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" >

Details View details

Sewer Knee DN 32 angle 67 degrees (internal)

Sewer Knee fi 32 angle 67 degrees

The sewer knee with a diameter of fi 32mm, with a wall of 1, 8mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" >

Details View details

Sewer Knee DN 32 Angle 30 degree (internal)

Sewer Knee fi 32 angle 30 degrees

The sewer knee with a diameter of fi 32mm, with a wall of 1, 8mm angle of 30 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left" >

Details View details

Sewer pipe with PP DN 32x1, 8x250mm (internal)

Out-of-Stock

Sewer pipe with PP fi 32x1, 8x250mm

Sewer pipe with a diameter of 1, 8mm with a length of 250mm, with the Polish standard PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat.

Details View details

Sewer pipe with PP DN 32x1, 8x315mm (internal)

Out-of-Stock

Sewer pipe with PP fi 32x1, 8x315mm

Sewer pipe, diameter fi 32mm, with a wall of 1, 8mm with a length of 315mm, with the Polish norm PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat.

Details View details

Sewer pipe with PP DN 32x1, 8x500mm (internal)

Out-of-Stock

Sewer pipe with PP fi 32x1, 8x500mm

Sewer pipe with a diameter of 1, 8mm with a length of 500mm, with the Polish standard PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat.

Details View details

Sewer pipe with PP DN 32x1, 8x1000mm (internal)

Sewer pipe with PP fi 32x1, 8x1000mm

Sewer pipe with a diameter of 1, 8mm with a length of 1 meter, with the Polish norm PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat.

Details View details

Sewer pipe with PP DN 32x1, 8x2000mm (internal)

Sewer pipe with PP fi 32x1, 8x2000mm

Sewage pipe with a diameter of fi 32mm, with a wall of 1, 8mm with a length of 2 meters, with the Polish norm PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat.

Details View details

Sewer pipe with PP DN 40x1, 8x250mm (internal)

Out-of-Stock

Sewer pipe with PP fi 40x1, 8x250mm

Sewer pipe, fi 40mm diameter, with wall 1, 8mm with a length of 250mm, with Polish norm PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat.

Details View details

Sewer pipe with PP DN 40x1, 8x315mm (internal)

Sewer pipe with PP fi 40x1, 8x315mm

Sewer pipe, diameter fi 40mm, with a wall of 1, 8mm with a length of 315mm, with the Polish norm PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat.

Details View details

Sewer pipe with PP DN 40x1, 8x500mm (internal)

Out-of-Stock

Sewer pipe with PP fi 40x1, 8x500mm

Sewer pipe, fi 40mm diameter, with wall 1, 8mm with a length of 500mm, with Polish norm PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat.

Details View details

Sewer pipe with PP DN 40x1, 8x1000mm (internal)

Out-of-Stock

Sewer pipe with PP fi 40x1, 8x1000mm

Sewer pipe with a diameter of 1, 8mm, with the Polish standard PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat.

Details View details

Sewer pipe with PP DN 40x1, 8x2000mm (internal)

Out-of-Stock

Sewer pipe with PP fi 40x1, 8x2000mm

Sewer pipe with a diameter of 1, 8mm with a length of 2 meters, with Polish norm PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat.

Details View details

Sewer pipe with PP DN 50x1, 8x250mm (internal)

Sewer pipe with PP-H fi 50x1, 8x250mm

Sewer Pipe diameter fi 50mm, with Wall 1, 8mm with a length of 250mm, with Polish norm PN-EN 1451, made of polypropylene (PP) w kolorze szarym lub białym, przeznaczona jest do odprowadzania nieczystości wewnątrz budynku. Rury wykonane z tworzyw najwyższej jakości z kielichem i uszczelką, są wytrzymałe i odporne na wysoką temperaturę.

Details View details

Sewer pipe with PP DN 50x1, 8x315mm (internal)

Sewer pipe with PP-H fi 50x1, 8x315mm

Sewer pipe, fi 50mm diameter, with 1, 8mm wall with a length of 315mm, with Polish norm PN-EN 1451, made of polypropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat.

Details View details

Sewer pipe with PP DN 50x1, 8x500mm (internal)

Sewer pipe with PP-H fi 50x1, 8x500mm

Sewer Pipe diameter fi 50mm, with 1, 8mm wall length 500mm, with Polish norm PN-EN 1451, made of polypropylene (PP) w kolorze szarym lub białym, przeznaczona jest do odprowadzania nieczystości wewnątrz budynku. Rury wykonane z tworzyw najwyższej jakości z kielichem i uszczelką, są wytrzymałe i odporne na wysoką temperaturę.

Details View details

Sewer pipe with PP DN 50x1, 8x1000mm (internal)

Sewer pipe with PP-H fi 50x1, 8x1000mm

Sewer pipe with a diameter of 1, 8mm with a length of 1 meter with Polish norm PN-EN 1451, made of polypropylene (PP) w kolorze szarym lub białym, przeznaczona jest do odprowadzania nieczystości wewnątrz budynku. Rury wykonane z tworzyw najwyższej jakości z kielichem i uszczelką, są wytrzymałe i odporne na wysoką temperaturę.

Details View details

Sewer pipe with PP DN 50x1, 8x2000mm (internal)

Sewer pipe with PP-H fi 50x1, 8x2000mm

Sewer pipe with a diameter of 1, 8mm with a length of 2 meters, with Polish norm PN-EN 1451, made of polypropylene (PP) w kolorze szarym lub białym, przeznaczona jest do odprowadzania nieczystości wewnątrz budynku. Rury wykonane z tworzyw najwyższej jakości z kielichem i uszczelką, są wytrzymałe i odporne na wysoką temperaturę.

Details View details