Best sellers

PEX clamping straight Nipple fi 16mm
PEX clamping straight Nipple fi 16mm
A straight clamp with a diameter of fi 16mm, with the Polish standard PN-EN ISO 21003, made of gold-coloured brass, is designed for the installation of the PEX pipeline in systems for the transmission of water for consumption, for economic purposes and in installations Heating (CO) and industrial water circuits. The coupling is characterized by total corrosion resistance, high durability and does
Details View details  
Gasket FI 40mm
Out-of-Stock
Gasket FI 40mm
GASKET FOR FITTINGS PE PN 16 SDR 11 with a diameter of fi 40mm, with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.
Details View details  
Gasket FI 32mm
Out-of-Stock
Gasket FI 32mm
GASKET FOR FITTINGS PE PN 16 SDR 11 with a diameter of fi 32mm, with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.
Details View details  
Gasket FI 25mm
Out-of-Stock
Gasket FI 25mm
GASKET FOR FITTINGS PE PN 16 SDR 11 with diameter fi 25mm, with standard UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.
Details View details  
Clamping Ring White fi 63mm
Out-of-Stock
Clamping Ring White fi 63mm
The clamping ring for PE PN 16 SDR 11 fittings with a diameter of fi 63mm, with the standard UNI-ISO 7/1, made of polyethylene (PE HD) in white, is intended for the construction of water and irrigation systems. It is characterized by quick and easy assembly.
Details View details  
Clamping Ring White fi 50mm
Out-of-Stock
Clamping Ring White fi 50mm
The clamping ring for PE PN 16 SDR 11 fittings with a diameter of fi 50mm, with the standard UNI-ISO 7/1, made of polyethylene (PE HD) in white, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.
Details View details  
Clamping Ring White fi 32mm
Clamping Ring White fi 40mm
The clamping ring for PE PN 16 SDR 11 fittings with a diameter of fi 40mm, with the standard UNI-ISO 7/1, made of polyethylene (PE HD) in white, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.
Details View details  
Clamping Ring White fi 32mm
Out-of-Stock
Clamping Ring White fi 32mm
The clamping ring for PE PN 16 SDR 11 fittings with a diameter of fi 32mm, with the standard UNI-ISO 7/1, made of polyethylene (PE HD) in white, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.
Details View details  
Clamping Ring White fi 25mm
Out-of-Stock
Clamping Ring White fi 25mm
The clamping ring for PE PN 16 SDR 11 with a diameter of fi 25mm, with the standard UNI-ISO 7/1, made of polyethylene (PE HD) in white, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.
Details View details  
Pressure Ring Black fi 63mm
Out-of-Stock
Pressure Ring Black fi 63mm
The pressure ring for PE PN 16 SDR 11 fittings with a diameter of fi 63mm, with the standard UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.
Details View details  
Pressure Ring Black fi 50mm
Out-of-Stock
Pressure Ring Black fi 50mm
The pressure ring for PE PN 16 SDR 11 with a diameter of fi 50mm, with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.
Details View details  
Pressure Ring Black fi 40mm
Pressure Ring Black fi 40mm
The pressure ring for PE PN 16 SDR 11 fittings with a diameter of fi 40mm, with the standard UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.
Details View details  
Pressure Ring Black fi 32mm
Pressure Ring Black fi 32mm
The pressure ring for PE PN 16 SDR 11 with a diameter of fi 32mm, with the standard UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.
Details View details  
Pressure Ring Black fi 25mm
Out-of-Stock
Pressure Ring Black fi 25mm
The pressure ring for PE PN 16 SDR 11 with fi 25mm diameter, UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.
Details View details  
Thermal insulation PE Stabil fi 28/9mm Section 2m (blue)
Out-of-Stock
Thermal insulation PE Stabil fi 28/9mm Section 2m (blue)
The Stabil thermal insulation cover with an inner diameter of 28mm, with a wall of 9mm, with Polish standard PN-EN 14313, made of ecologically foamed PE polyethylene, coated with LDPE foil, in blue, produced in 2m sections, is intended for insulation Sanitary, heating, air conditioning, refrigeration and steel piping, copper and plastic pipes, mounted in residential, administrative and industrial
Details View details  
Thermal insulation PE Stabil fi 28/9mm section 2m (red)
Out-of-Stock
Thermal insulation PE Stabil fi 28/9mm section 2m (red)
The Stabil thermal insulation cover with an inner diameter of 28mm, with a wall of 9mm, with Polish standard PN-EN 14313, made of ecologically foamed PE polyethylene, coated with LDPE film, in Red, produced in 2m sections, is designed for pipe insulation Sanitary, heating, air conditioning, refrigeration and steel, copper and plastic pipelines, mounted in residential, administrative and industria
Details View details  
Welded reduction PPR fi 50/75mm
Out-of-Stock
PP-R fi 50/75mm welded reduction
Welded reduction with a diameter of fi 50/75mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Tee with internal thread PPR fi 20x3/4 "mm angle 90 degrees
Tee with internal thread PP-R fi 20x3/4
The tee with internal thread diameter fi 20x3/4 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded PPR Fi 75mm
Out-of-Stock
Welded PP-R fi 75mm
Welded with a diameter of fi 75mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
PPR Plug fi 16mm
PP-R plug fi 16mm
PPR fi 16mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant. 
Details View details  
Elbow with external thread PP fi 16x1/2 "mm
Elbow with external thread PP-R fi 16x1/2
Elbow with external thread of diameter fi 16x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Tee PPR fi 16mm angle 90 degrees
Welded Tee PP-R fi 16mm angle 90 degrees
Welded tee with a diameter of fi 16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Drain reduction PP DN 125/160
Drain reduction PP DN 125/160
Drainage reduction with a diameter of fi 125/160mm, with a wall of 2, 8x3, 2mm, with the Polish norm, ETC. AT/18-2014-0025-02, made of polypropylene (PP) in grey or orange, is designed for joining drainage pipes, dewatering the land. The reduction made of the highest quality plastics guarantees protection against the inflow of water in all areas of construction.
Details View details  
PVC Sewer pipe DN 110x3, 2x500mm (outer-solid)
Out-of-Stock
PVC Sewer pipe fi 110x3, 2x500mm solid
The sewer pipe (solid) with a diameter of fi 110mm, with a wall of 3, 2mm with a length of 500mm, with the Polish standard PN EN 1329-1, made of poly (vinyl chloride) PVC, light type SN2, in Orange, is intended for the discharge of impurities outside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to chemical substances.
Details View details  
Sewer pipe with PP DN 32x1, 8x250mm (internal)
Out-of-Stock
Sewer pipe with PP fi 32x1, 8x250mm
Sewer pipe with a diameter of 1, 8mm with a length of 250mm, with the Polish standard PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat. 
Details View details  
Sewer Tee DN 110/110 angle 45 degrees (external)
Sewer Tee fi 110/110 angle 45 degrees- Z
The sewer tee with a diameter of fi 110/110mm, an angle of 45 degrees, with the Polish standard PN EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to connect sewer pipes at different angles, draining impurities outside Building. The tee with a cup and gasket made of the highest quality plastics, is durable and resistant to heat. 
Details View details  
PVC Sewer pipe DN 160x4, 0x3000mm (outer-solid)
Out-of-Stock
PVC Sewer pipe fi 160x4, 0x3000mm solid
Sewer pipe (solid) with a diameter of fi 160mm, with a wall of 4, 0mm with a length of 3 meters, with the Polish standard PN EN 1401-1:1999, made of poly (vinyl chloride) PVC, type medium SN4, in orange, is designed for draining impurities outside Building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to chemical substances.
NLonger lengths of pipe
Details View details  
Sewage cleaning-Revision DN 50 (internal)
Sewage Cleaning-Fi 50
A sewer cleaner with a diameter of 1, 8mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for inspection of the inside of the pipeline, draining impurities within the building. The Cleaner with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Twisted Knee PE fi 25mm
Twisted Knee PE fi 25mm
PE-Twisted Knee PN 10 SDR 17 with a diameter of fi 25mm, with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black with blue nuts, is intended for the construction of water and irrigation systems. It is characterized by high hydraulic tightness and quick and easy assembly. Connecting the knee to the PE tube is done with a clamping ring, which covers and presses the pipe after tightening th
Details View details  
Twisted pair PE connector GW fi 50x2 "
Out-of-Stock
Twisted pair PE Connector GW fi 50x2
Coupling with PE threaded pipe PN 10 SDR 17 with a diameter of fi 50x2 ", with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black with blue nuts, is intended for the construction of water and irrigation systems. It is characterized by high hydraulic tightness and quick and easy assembly. Connecting the coupling with the PE tube is done with a clamping ring, which covers and presses the p
Details View details  
with internal thread PP fi 20x3/4 mm
with internal thread PP-R fi 20x3/4
with inner thread diameter fi 20x3/4 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Details View details  
PPR fi 40mm Cap
PP-R fi 40mm plug
The PPR fi 40mm cap, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant. 
Details View details  
Sewer Tee DN 110/75 angle 67 degrees (internal)
Sewer Tee fi 110/75 angle 67 degrees
The sewer tee with a diameter of fi 110/75mm, with a wall of 2, 7mm angle 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining of impurities Indoor. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer pipe with PP DN 32x1, 8x315mm (internal)
Out-of-Stock
Sewer pipe with PP fi 32x1, 8x315mm
Sewer pipe, diameter fi 32mm, with a wall of 1, 8mm with a length of 315mm, with the Polish norm PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat. 
Details View details  
Sewer Tee DN 250/110 angle 90 degrees (external)
Out-of-Stock
Sewer Tee fi 250/110 angle 90 degrees
The sewer tee with a diameter of fi 250/110mm, angle 90 degrees, with the Polish standard PN EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to connect sewer pipes at different angles, draining impurities outside Building. The tee with a cup and gasket made of the highest quality plastics, is durable and resistant to heat. 
Details View details  
Drain tee PP DN 80/80 Angle 90
Drain tee PP DN 80/80 Angle 90
80/80mm diameter drainage tee, angle 90 degrees, with Polish standard < span>ETC AT/18-2014-0025-02, made of polypropylene (PP) in Orange, is designed to connect drain pipes at an angle of 90 degrees. The drainage tee made of the highest quality plastic guarantees protection against the inflow of water in all areas of civil and water construction.
Details View details