Best sellers

Twisted Straight connector GZ PEX 20x1/2 "mm
Twisted Straight connector GZ PEX 20x1/2 "mm
The straight screw connection with the external thread with a diameter of fi 20x1/2mm, with the Polish standard PN-EN ISO 21003, made of gold-coloured brass, is intended for the installation of the PEX pipeline in systems for the transmission of water for consumption, for the purposes of Heating systems (CO) and industrial water circuits. The coupling is characterized by total corrosion resistanc
Details View details  
Twisted Tee PE fi 32mm
Twisted Tee PE fi 32mm
PE Twisted Tee PN 10 SDR 17 with a diameter of fi 32mm, with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black with blue nuts, is designed for the construction of water and irrigation systems. It is characterized by high hydraulic tightness and quick and easy assembly. Connecting Tees with PE tube is done with a clamping ring, which covers and presses the pipe after tightening the blue
Details View details  
with external thread PPR fi 32x1 mini
Out-of-Stock
with external thread PPR fi 32x1
with external thread diameter fi 32x1 mini, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Kolano GZ Hanger PPR fi 20x1/2 "mm
Elbow GZ Hanger PP-R fi 20x1/2
Elbow hanger with external thread diameter fi 20x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded reducer Tee PPR fi 40/32mm angle 90 degrees
Welded reducer Tee PPR fi 40/32mm angle 90 degrees
Welded reduction tee with diameter fi 40/32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-20 fi 63mm
Welded pipe PP-R PN-20 fi 63mm












Welded pipe PPR PN-20 SDR-6 with a diameter of fi 63mm, with a wall of 10, 5mm length of 4 meters, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings.  Tubes are shi
Details View details  
Welded pipe PPR PN-16 fi 32mm
Out-of-Stock
Welded pipe PP-R PN-16 fi 32mm
Welded pipe PPR PN-16 SDR-7.4 with a diameter of fi 32mm, with a wall 4, 4mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tube
Details View details  
Drain plug PP DN 160
Drain plug PP DN 160
A drain plug with a diameter of fi 160, with a wall of 3, 0mm, with the Polish norm, ETC. AT/18-2014-0025-02, made of polypropylene (PP) in grey or orange, is designed for sealing the ends of drainage systems draining the land. The cap made of high-quality plastics guarantees protection against the inflow of water in all the construction works.
Details View details  
Drainage four PP DN 100/80/100/80mm Angle 90
Drainage four PP DN 100/80/100/80mm Angle 90
Drainage four with a diameter of fi 100/80/100/80mm, angle 90 degrees, with Polish norm, ETC. AT/18-2014-0025-02, made of PP polypropylene in grey or orange, is designed to connect drainage pipes draining the land and areas around the structure . The four-piece made of high-quality plastics guarantees protection against water inflow in all areas of construction. 
Details View details  
Sewer Tee DN 40/40 angle 90 degrees (internal)
Sewer Tee fi 40/40 angle 90 degrees
The sewer tee with a diameter of fi 40/40mm, with a wall of 1, 8mm angle of 90 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer pipe with PP DN 40x1, 8x1000mm (internal)
Out-of-Stock
Sewer pipe with PP fi 40x1, 8x1000mm
Sewer pipe with a diameter of 1, 8mm, with the Polish standard PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat. 
Details View details  
with Limiter DN 250 (external)
Out-of-Stock
with Limiter fi 250
The sewer muzzle with a diameter of fi 250mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The with limiter and gasket made of the highest quality plastic, is durable and resistant to heat. 
Details View details  
PE Pipe HD 100 DN 180x6, 9mm
Out-of-Stock
PE Pipe HD 100 DN 180x6, 9mm
Pressure Pipe PN 6 SDR 26 with a diameter of fi 180mm, with a wall of 6, 9mm with a length of 12MB, with Polish standard PN-EN 12201-2, made of polyethylene (PE HD) in black with blue stripes, is intended for the transmission of treated drinking water and sewage Social and cultural activities. Pipes made of the highest quality plastics can be combined with a wide range of pressure fittings.
Po
Details View details  
Pipe Cutters
Pipe Cutters
The pipe cutter with the Polish standard PN-EN ISO 21003, made of gold-coloured brass, is intended for the installation of the PEX pipeline in systems for the transmission of water for consumption, for economic purposes and in heating installations (CO) and Industrial water circuits. The knee is characterized by total corrosion resistance, high durability and does not affect the quality of water
Details View details  
Clamping elbow GZ PEX fi 16x1/2 "
Clamping elbow GZ PEX fi 16x1/2 "
Clamping elbow with external thread, diameter fi 16x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 21003, made of brass in light gold color, with clamping profile "U", it is intended for installation of PEX pipelines in installations for Water for consumption, for economic purposes and in heating (CO) and industrial water circuits. The knee is characterized by total corrosion resistance,
Details View details  
Twisted Elbow PEX fi 16mm
Twisted Elbow PEX fi 16mm
Twisted elbow with a diameter of fi 16mm, angle 90 degrees, with the Polish standard PN-EN ISO 21003, made of gold-coloured brass, is intended for the installation of PEX pipelines in installations for the transmission of water for consumption, for economic purposes and in installations Heating (CO) and industrial water circuits. The knee is characterized by total corrosion resistance, high durab
Details View details  
Elbow with internal thread PP fi 25x3/4 "
Elbow with internal thread PP-R fi 25x3/4
Elbow with internal thread of diameter fi 25x3/4 ", angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
with external thread PPR fi 32x3/4 mm
with external thread PP-R fi 32x3/4
with external thread diameter fi 32x3/4 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Details View details  
Welded Reducer Tee PPR fi 63/32mm angle 90 degrees
Welded Reducer Tee PPR fi 63/32mm angle 90 degrees
Welded reduction tee with diameter fi 63/32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded Studs PPR fi 16mm angle 90 degrees
Welded nipple PP-R fi 16mm angle 90 degrees
Welded nipple with a diameter of fi 16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Drain (joining) PP DN 50
Drain (joining) PP DN 50
Drainage (connecting) with a diameter of fi 50mm, with a wall of 1, 8mm, with the Polish standard ITP AT/18-2014-0025-02, made of polypropylene (PP) in grey or orange, is designed to connect drainage pipes dewatering the land and areas around the structure. The made of the highest quality plastic guarantees protection against the inflow of water in all areas of construction.
Details View details  
Sewer pipe with PP DN 75x1, 9x315mm (internal)
Out-of-Stock
Sewer pipe with PP-H fi 75x1, 9x315mm
Sewer pipe, fi 75mm in diameter, with a wall of 1, 9mm with a length of 315mm, with the Polish standard PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat. 
Details View details  
PVC Sewer pipe DN 250x7, 3x6000mm (outer-solid)
Out-of-Stock
PVC Sewer pipe fi 250x7, 3x6000mm solid
Sewage pipe (solid) with a diameter of fi 250mm, with a wall of 7, 3mm with a length of 6 meters, with the Polish standard PN EN 1401-1:1999, made of poly (vinyl chloride) PVC, type heavy SN8, in Orange, is designed for draining impurities outside Building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to chemical substances.
Longer lengths of pipes
Details View details  
Drain tee PP DN 125/125 Angle 90
Drain tee PP DN 125/125 Angle 90
Drain tee with diameter 125/125mm, angle 90 degrees, with Polish standard < span>ETC AT/18-2014-0025-02, made of polypropylene (PP) in Orange, is designed to connect drain pipes at an angle of 90 degrees. The drainage tee made of the highest quality plastic guarantees protection against the inflow of water in all areas of civil and water construction.
Details View details  
Drainage knee PP DN 80 Angle 90
Drainage knee PP DN 80 Angle 90
Drainage knee with a diameter of fi 80mm, angle 90 degrees, with the Polish norm, ETC. AT/18-2014-0025-02, made of PP polypropylene in grey or orange, is designed to connect drainage pipes draining the land and areas around the structure. The knee is made of high-quality plastics and guarantees protection against water inflow in all areas of construction. 
Details View details  
Sewer compensator DN 110 L-250 (internal)
Sewer compensator fi 110 L-250
The sewer compensator with a diameter of fi 110mm, with a wall of 2, 7mm, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to regulate the length of the pipeline, draining impurities inside the building. The compensator with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Tee DN 75/50 angle 45 degrees (internal)
Sewer Tee fi 75/50 angle 45 degrees
The sewer tee with a diameter of fi 75/50mm, with a wall of 1, 8mm angle of 45 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.  
Details View details  
Sewer Tee DN 75/50 angle 90 degrees (internal)
Sewer Tee fi 75/50 angle 90 degrees
The sewer tee with a diameter of fi 75/50mm, with a wall of 1, 8mm angle of 90 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
PP Plug-RCT fi 32mm
Out-of-Stock
PP Plug-RCT fi 32mm
PP-RCT fi 32mm plug, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant. 
Details View details  
PP Plug-RCT fi 25mm
Out-of-Stock
PP Plug-RCT fi 25mm
PP-RCT fi 25mm plug, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant. 
Details View details  
Welded PP-RCT fi 40mm
Out-of-Stock
Welded PP-RCT fi 40mm
PP-RCT welded with a diameter of fi 40mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded elbow PP-RCT fi 40mm angle 90 degrees
Out-of-Stock
Welded elbow PP-RCT fi 40mm angle 90 degrees
Welded knee PP-RCT diameter fi 40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Welded elbow PP-RCT fi 32mm angle 90 degrees
Out-of-Stock
Welded elbow PP-RCT fi 32mm angle 90 degrees
Welded knee PP-RCT diameter fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Tee with internal thread PP-RCT fi 20x1/2 "mm angle 90 degrees
Out-of-Stock
Tee with internal thread PP-RCT fi 20x1/2
Tee with internal thread PP-RCT diameter fi 20x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Elbow with internal thread PP-RCT fi 20x1/2 "
Out-of-Stock
Elbow with internal thread PP-RCT fi 20x1/2
Elbow with internal thread PP-RCT diameter fi 20x1/2 ", angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for the installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Straight connector GW PEX fi 16x1/2 "mm
Out-of-Stock
Straight connector GW PEX fi 16x1/2 "mm
Straight clamp with internal thread fi 16x1/2 "mm, with Polish standard PN-EN ISO 21003, made of gold-coloured brass, is designed for the installation of the PEX pipeline in systems for the transmission of water for consumption, for the purposes of Heating systems (CO) and industrial water circuits. The coupling is characterized by total corrosion resistance, high durability and does not affect t
Details View details