K2-Kan outer form fittings with PP

ID-Form Fittings

A wide selection of K2-Kan external sewage fittings, non-pressurized PP with different dimensions and operating parameters for installation of sewage systems, draining of household and commercial sewage. It consists of fittings in diameters up to fi 160mm to fi 1000mm in orange color. 

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

Two-socket knee-length K2-Kan with PP
Two-socket knees
Corrugated tees with a departure to the smooth pipe K2-Kan with PP
Tees with a smooth pipe
Crimed Fittings K2-Kan with PP
Fittings
Corrugated K2-Kan with PP
Sleeves
Crimed reducers K2-Kan with PP
Reductions
Crimed Fittings for Cup K2-Kan with PP
Fittings for Chalks
Crimed fittings for K2-Kan PP plain pipes
Plain Pipe Fittings
Single-hull knees K2-Kan with PP
Monorelic Knees
K2-Kan Pass Tees with PP
Tees
Crimed plugs K2-Kan with PP
Plugs
Crimed Saddle K2-Kan with PP
PP Fifth Wheel Connection
Pipe Seals K2-Kan
Seals
Flake Tee (structural) with PP DN 500/300 angle 45 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 500/300 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 500/300mm angle 45 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake Tee (structural) with PP DN 600/200 angle 90 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 600/200 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 600/200mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake Tee (structural) with PP DN 500/400 angle 45 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 500/400 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 500/400mm angle 45 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Corrugated (structural) knee with PP DN 300 angle 90 degrees
Out-of-Stock
Corrugated (structural) knee with PP DN 300 angle 90 degrees
Corrugated (structural) Elbow K2-Kan diameter fi 300mm angle 90 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Flake Tee (structural) with PP DN 600/250 angle 90 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 600/250 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 600/250mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake Tee (structural) with PP DN 600/200 angle 45 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 600/200 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 600/200mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Corrugated (structural) elbow with PP DN 400 angle 15 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 400 angle 15 degree
Corrugated (structural) Elbow K2-Kan with diameter fi 400mm angle 15 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Flake Tee (structural) with PP DN 600/300 angle 90 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 600/300 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 600/300mm angle 90 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake Tee (structural) with PP DN 600/250 angle 45 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 600/250 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 600/250mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Corrugated (structural) elbow with PP DN 400 Angle 30 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 400 Angle 30 degree
Corrugated (structural) Elbow K2-Kan with diameter fi 400mm angle 30 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Flake Tee (structural) with PP DN 600/400 angle 90 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 600/400 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 600/400mm angle of 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake Tee (structural) with PP DN 600/300 angle 45 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 600/300 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 600/300mm angle 45 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Corrugated (structural) knee with PP DN 400 angle 45 degrees
Out-of-Stock
Corrugated (structural) knee with PP DN 400 angle 45 degrees
Corrugated (structural) Elbow K2-Kan with diameter fi 400mm angle 45 degrees, double-edging, with Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, it is designed for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Flake Tee (structural) with PP DN 800/300 angle 90 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 800/300 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 800/300mm angle 90 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake Tee (structural) with PP DN 600/400 angle 45 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 600/400 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 600/400mm angle of 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake tee (with leaving for smooth pipe) with PP DN 1000/200 angle 90 degrees
Out-of-Stock
Flake tee (with leaving for smooth pipe) with PP DN 1000/200 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 1000/200mm angle of 90 degrees, with a departure to the smooth pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and a nationwide . The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake tee (with leaving for smooth pipe) with PP DN 1000/200 angle 45 degrees
Out-of-Stock
Flake tee (with leaving for smooth pipe) with PP DN 1000/200 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 1000/200mm angle of 45 degrees, with a departure to the smooth pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and a nationwide . The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Corrugated (structural) knee with PP DN 400 angle 90 degrees
Out-of-Stock
Corrugated (structural) knee with PP DN 400 angle 90 degrees
Corrugated (structural) Elbow K2-Kan with diameter fi 400mm angle 90 degrees, double-edging, with Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, it is designed for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Flake Tee (structural) with PP DN 1000/300 angle 90 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 1000/300 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 1000/300mm angle 90 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Flake Tee (structural) with PP DN 800/300 angle 45 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 800/300 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 800/300mm angle 45 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Corrugated (structural) elbow with PP DN 500 angle 15 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 500 angle 15 degree
Corrugated (structural) Elbow K2-Kan with a diameter of 15 degrees fi 500mm, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and non-float sewer. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Flake Tee (structural) with PP DN 1000/300 angle 45 degrees
Out-of-Stock
Flake Tee (structural) with PP DN 1000/300 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 1000/300mm angle 45 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Details View details  
Corrugated (structural) elbow with PP DN 500 angle 30 degree
Out-of-Stock
Corrugated (structural) elbow with PP DN 500 angle 30 degree
Corrugated (structural) Elbow K2-Kan with diameter fi 500mm angle 30 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Corrugated (structural) knee with PP DN 500 angle 45 degrees
Out-of-Stock
Corrugated (structural) knee with PP DN 500 angle 45 degrees
Corrugated (structural) Elbow K2-Kan with a diameter of fi 500mm angle 45 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details  
Corrugated (structural) knee with PP DN 500 angle 90 degrees
Out-of-Stock
Corrugated (structural) knee with PP DN 500 angle 90 degrees
Corrugated (structural) Elbow K2-Kan with a diameter of fi 500mm angle 90 degrees, double-edging, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for the construction of sanitary and general sewage. The knee is made of the highest quality plastic with two sleeves without gaskets, it is durable and tight in joints.
Details View details