PE HD 100 pressure fittings for water mains.

Segment PE Fittings

Wide range of segmented fittings  PE HD o różnych wymiarach i parametrach pracy do montażu instalacji wodociągowej, odprowadzających wodę pitną oraz ścieki socjalno-bytowe. W skład wchodzą kształtki w zakresie średnic do fi 90mm do fi 400mm w kolorze czarnym z niebieskimi paskami.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

PN 6
PN 6
PN 10
PN 10
PN 16
PN 16

Active filters

Sectional Tee Angle Reduction fi 225/225/63mm Angle 67 ° PN 10
Out-of-Stock
Sectional Tee Angle Reduction fi 225/225/63mm Angle 67 ° PN 10
Segmented tee Angled reducing PE HD 100 PN 10 SDR 17 with a diameter of fi 225/225/63mm, angle 67 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is intended for the transmission of treated Drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/160 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 250/250/160 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 250/250/160mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/125 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 250/250/125 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 250/250/125mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/110 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 250/250/110 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 250/250/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/90 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 250/250/90 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 250/250/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/160 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 225/225/160 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 225/225/160mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/125 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 225/225/125 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 225/225/125mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/110 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 225/225/110 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 225/225/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/90 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 225/225/90 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 225/225/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/160 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 200/200/160 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 200/200/160mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/125 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 200/200/125 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 200/200/125mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/110 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 200/200/110 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 200/200/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/90 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 200/200/90 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 200/200/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 180/180/110 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 180/180/110 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 180/180/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 180/180/90 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 180/180/90 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 180/180/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 160/160/110 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 160/160/110 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 160/160/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 160/160/90 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 160/160/90 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 160/160/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 125/125/110 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 125/125/110 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 125/125/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 125/125/90 angle 45 ° with arch 60 ° PN 16
Out-of-Stock
Segmented Tee angle fi 125/125/90 angle 45 ° with arch 60 ° PN 16
Segmented tee angle PE HD 100 PN 16 SDR 17 diameter FI 125/125/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/160 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 250/250/160 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 250/250/160mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/125 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 250/250/125 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 250/250/125mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/110 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 250/250/110 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 250/250/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 250/250/90 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 250/250/90 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 250/250/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/160 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 225/225/160 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 225/225/160mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/125 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 225/225/125 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 225/225/125mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/110 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 225/225/110 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 225/225/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 225/225/90 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 225/225/90 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 225/225/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/160 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 200/200/160 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 200/200/160mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/125 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 200/200/125 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 200/200/125mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/110 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 200/200/110 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 200/200/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 200/200/90 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 200/200/90 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 200/200/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 180/180/110 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 180/180/110 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 180/180/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 160/160/110 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 180/180/90 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 180/180/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 160/160/110 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 160/160/110 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter fi 160/160/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 160/160/90 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 160/160/90 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter fi 160/160/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 125/125/110 angle 45 ° with arch 60 ° PN 10
Out-of-Stock
Segmented Tee angle fi 125/125/110 angle 45 ° with arch 60 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 diameter FI 125/125/110mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and social-welfare wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details