PN 16

The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 20mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The parallel tee PE100 PN 16 SDR 11 with a diameter of fi 20mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 25mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Reducing tee PE100 PN 16 SDR 11 with a diameter of fi 63/50mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 32mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 40mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Reducing tee PE100 PN 16 SDR 11 with a diameter of fi 75/32mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt Knee Long PE 100, PN 16 SDR 11 diameter fi 20mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 50mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Reducing tee PE100 PN 16 SDR 11 with a diameter of fi 75/50mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 63mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Reducing tee PE100 PN 16 SDR 11 with a diameter of fi 75/63mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 75mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Reducing tee PE100 PN 16 SDR 11 with a diameter of fi 90/50mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100, PN 16 SDR 11 diameter fi 40mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 90mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Reducing tee PE100 PN 16 SDR 11 with a diameter of fi 90/63mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 16 SDR 11 diameter fi 50mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 110mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Reducing tee PE100 PN 16 SDR 11 with a diameter of fi 90/75mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 63mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 125mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Reducing tee PE100 PN 16 SDR 11 with a diameter of fi 110/63mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 16 SDR 11 with a diameter of 75mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 140mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Reducing tee PE100 PN 16 SDR 11 with a diameter of fi 110/75mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 16 SDR 11 with a diameter of 90mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 160mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Reducing tee PE100 PN 16 SDR 11 with a diameter of fi 110/90mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 110mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 180mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Reducing tee PE100 PN 16 SDR 11 with a diameter of fi 125/90mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 125mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 200mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Reducing tee PE100 PN 16 SDR 11 with a diameter of fi 125/110mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.