PE HD Butt Fittings

Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 63mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt Knee Long PE 100, PN 16 SDR 11 diameter fi 20mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of 75mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 90mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The parallel tee PE100 PN 16 SDR 11 with a diameter of fi 20mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Reducing tee PE100 PN 10 SDR 17 with a diameter of fi 63/50mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 50mm with standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 20mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 90mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 125mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 140mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 63mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 160mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Reducing tee PE100 PN 16 SDR 11 with a diameter of fi 63/50mm with EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 180mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 200mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 225mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 250mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt elbow of the long PE 100 is PN 10 SDR 17, with a diameter of fi 280mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100, PN 10 SDR 17 diameter fi 315mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with the diameter fi 355mm, the angle 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 400mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 450mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 500mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 560mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 560mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 DIN 16 SDR 11 with a diameter of fi 25mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 DIN 16 SDR 11 with a diameter of fi 32mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 DIN 16 SDR 11 diameter fi 40mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 DIN 16 SDR 11 diameter fi 50mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 with a diameter of fi 63mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt knee Long PE 100 din PN 16 SDR 11 diameter fi 75mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt Knee Long PE 100 DIN 16 SDR 11 with diameter fi 90mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 DIN 16 SDR 11 with a diameter of fi 110mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.