PE HD Butt Fittings

Butt elbow Long PE 100 PN 10 SDR 17 with diameter fi 90mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 32mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 32mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 40mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 50mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt Knee Long PE 100 PN 16 SDR 11 with a diameter of fi 63mm, 30 degree angle with EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 75mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 with diameter fi 90mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 with a diameter of fi 110mm, 30 degree angle with EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 with fi 125mm diameter, 30 degree angle with EN 1555 standard, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 DIN 16 SDR 11 with fi 140mm diameter, 30 degree angle with EN 1555 standard, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 160mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 with a diameter of fi 180mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 200mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 225mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 250mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 280mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt Knee Long PE 100 PN 16 SDR 11 diameter fi 315mm, 30 degree angle with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of 75mm, an angle of 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of 90 mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 110mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 125mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 140mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 160mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 180mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 200mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 225mm, an angle of 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 250mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with diameter fi 280mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 diameter fi 315mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100, PN 10 SDR 17, diameter fi 355mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 400mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with diameter fi 450mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 500mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 560mm, an angle of 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.