PP Sewer Fittings from fi 32 to fi 110mm

Sewer Fittings

The fittings in the internal sewage system of PP are intended for indoor installation. The system is based on grey or white fittings in diameters from fi 32mm to fi 110mm. Durability and usability make our products widely used in residential and general construction.

 Show Moreexpand_more
 Show Lessexpand_less

Subcategories

Internal sewer knee with PP
Knee
Internal sewer tees with PP
Tees
PP Internal Sewer
Metal
Internal sewer fittings with PP
Fittings
Internal sewer reduction with PP
Reductions
Internal sewer plugs from PP
Plugs
PP Cast Iron Attachers
The Attachers
PP Internal Sewage Cleaners
Controlfix
Sewer/Firewood with PP
Winnowings
Aerators Sewer with PP
Aerators
PP Sewer Compensators
Compensators
Sewer Tee DN 110/75 angle 90 degrees (internal)
Sewer Tee fi 110/75 angle 90 degrees
The sewer tee with a diameter of fi 110/75mm, with a wall of 2, 7mm angle 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining of impurities Indoor. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 110 Angle 30 degree (internal)
Sewer Knee fi 110 angle 30 degrees
The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm, an angle of 30 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining dirt inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Details View details  
Sewer Tee DN 110/75 angle 67 degrees (internal)
Sewer Tee fi 110/75 angle 67 degrees
The sewer tee with a diameter of fi 110/75mm, with a wall of 2, 7mm angle 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining of impurities Indoor. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer four DN 110/50 angle 45 degrees (internal)
Sewer four fi 110/50 angle 45 degrees
The sewer four with a diameter of fi 110/50mm, with a wall of 2, 7mm, an angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewage pipes, draining impurities inside the building. The four-piece seal made of high-quality plastic is durable and resistant to heat.
Details View details  
Sewer Connector DN 32 (internal)
Sewer Fitting fi 32
The sewer fitting with a diameter of fi 32mm, with a wall of 1, 8mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed for joining sewage pipes, draining impurities inside the building. The coupling with gasket is made of the highest quality plastic, is durable and resistant to heat. 
Details View details  
Sewer reduction DN 50/32 Angle 90 degree (internal)
Sewer reduction fi 50/32 angle 90 degrees
Sewer reduction with a diameter of fi 50/32mm, with a wall of 1, 8mm, angle 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in white, is designed to connect sewage pipes, draining impurities inside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
< P align = "left"> 
Details View details  
Sewer Knee DN 110 Angle 22 degree (internal)
Sewer Knee fi 110 Angle 22 degree
The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 22 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Details View details  
Sewer reduction DN 50/40 (internal)
Sewer reduction fi 50/40
The sewer reduction of the diameter fi 50/40mm, with a wall of 1, 8mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in Biazm color, is designed for joining sewage pipes, draining impurities inside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
< P align = "lEFT "> 
Details View details  
Sewer Four DN 50/50 angle 90 degrees (internal)
Sewer Four fi 50/50 angle 90 degrees
The sewer four with a diameter of fi 50/50mm, with a wall of 1, 8mm, an angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for joining sewage pipes, draining impurities inside the building. The four-piece seal made of high-quality plastic is durable and resistant to heat.
Details View details  
Sewer Tee DN 110/50 angle 90 degrees (internal)
Sewer Tee fi 110/50 angle 90 degrees
The sewer tee with a diameter of fi 110/50mm, with a wall of 2, 7mm angle 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining of impurities Indoor. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.  
Details View details  
Sewer Knee DN 110 Angle 15 degree (internal)
Sewer Knee fi 110 Angle 15 degree
The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle of 15 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Details View details  
Sewer Tee DN 110/50 angle 67 degrees (internal)
Sewer Tee fi 110/50 angle 67 degrees
The sewer tee with a diameter of fi 110/50mm, with a wall of 2, 7mm angle 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining of impurities Indoor. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer four DN 50/50 angle 45 degrees (internal)
Sewer four fi 50/50 angle 45 degrees
The sewer four with a diameter of fi 50/50mm, with a wall of 1, 8mm, an angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for joining sewage pipes, draining impurities inside the building. The four-piece seal made of high-quality plastic is durable and resistant to heat.
Details View details  
Sewer Knee DN 75 angle 90 degrees (internal)
Sewer Knee fi 75 angle 90 degrees
The sewer knee with a diameter of fi 75mm, with a wall of 1, 9mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Tee DN 110/50 angle 45 degrees (internal)
Sewer Tee fi 110/50 angle 45 degrees
The sewer tee with a diameter of fi 110/75mm, with a wall of 2, 7mm angle 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining of impurities Indoor. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 75 angle 67 degrees (internal)
Sewer Knee fi 75 angle 67 degrees
The sewer knee with a diameter of fi 75mm, with a wall of 1, 8mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Tee DN 75/75 angle 90 degrees (internal)
Sewer Tee fi 75/75 angle 90 degrees
The sewer tee with a diameter of fi 75/75mm, with a wall of 1, 9mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 75 angle 45 degrees (internal)
Sewer Knee fi 75 angle 45 degrees
The sewer knee with a diameter of fi 75mm, with a wall of 1, 9mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Tee DN 75/75 angle 67 degrees (internal)
Sewer Tee fi 75/75 angle 67 degrees
The sewer tee with a diameter of fi 75/75mm, with a wall of 1, 9mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 75 Angle 30 degree (internal)
Sewer Knee fi 75 angle 30 degrees
The sewer knee with a diameter of fi 75mm, with a wall of 1, 9mm, an angle of 30 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Details View details  
Sewer Tee DN 75/75 angle 45 degrees (internal)
Sewer Tee fi 75/75 angle 45 degrees
The sewer tee with a diameter of fi 75/75mm, with a wall of 1, 9mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 50 angle 90 degrees (internal)
Sewer Knee fi 50 angle 90 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Details View details  
Sewer Tee DN 75/50 angle 90 degrees (internal)
Sewer Tee fi 75/50 angle 90 degrees
The sewer tee with a diameter of fi 75/50mm, with a wall of 1, 8mm angle of 90 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 50 angle 67 degrees (internal)
Sewer Knee fi 50 angle 67 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 67 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left"> 
Details View details  
Sewer Knee DN 50 angle 45 degrees (internal)
Sewer Knee fi 50 angle 45 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left"> 
Details View details  
Sewer Tee DN 75/50 angle 67 degrees (internal)
Sewer Tee fi 75/50 angle 67 degrees
The sewer tee with a diameter of fi 75/50mm, with a wall of 1, 8mm angle of 67 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Tee DN 75/50 angle 45 degrees (internal)
Sewer Tee fi 75/50 angle 45 degrees
The sewer tee with a diameter of fi 75/50mm, with a wall of 1, 8mm angle of 45 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.  
Details View details  
Sewer Knee DN 50 Angle 30 degree (internal)
Sewer Knee fi 50 angle 30 degrees
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 30 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Tee DN 50/50 angle 90 degrees (internal)
Sewer Tee fi 50/50 angle 90 degrees
Sewer tee with diameter fi 50/50mm, with wall 1, 8mm angle 90 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, it is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 50 Angle 22 degree (internal)
Sewer Knee fi 50 angle 22 degree
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 22 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Tee DN 50/50 angle 67 degrees (internal)
Sewer Tee fi 50/50 angle 67 degrees
Sewer tee with diameter fi 50/50mm, with wall 1, 8mm angle 67 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, it is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 50 Angle 15 degree (internal)
Sewer Knee fi 50 angle 15 degree
The sewer knee with a diameter of fi 50mm, with a wall of 1, 8mm angle of 15 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
< P align = "left"> 
Details View details  
Sewer Tee DN 50/50 angle 45 degrees (internal)
Sewer Tee fi 50/50 angle 45 degrees
Sewer tee with diameter fi 50/50mm, with wall 1, 8mm angle 45 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, it is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 40 angle 90 degrees (internal)
Sewer Knee fi 40 angle 90 degrees
The sewer knee with the diameter of fi 40mm, with a wall of 1, 8mm angle of 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Details View details  
Sewer Tee DN 40/40 angle 90 degrees (internal)
Sewer Tee fi 40/40 angle 90 degrees
The sewer tee with a diameter of fi 40/40mm, with a wall of 1, 8mm angle of 90 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Knee DN 40 angle 45 degrees (internal)
Sewer Knee fi 40 angle 45 degrees
The sewer knee with the diameter of fi 40mm, with a wall of 1, 8mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details