Best sellers

The sewer tee with a diameter of fi 110/50mm, with a wall of 2, 7mm angle 90 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining of impurities Indoor. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.  

with internal thread PP-RCT diameter fi 32x1 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 

Welded PP-RCT with a diameter of fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 

Welded knee PP-RCT diameter fi 32mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

Welded knee PP-RCT diameter fi 25mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

The straight screw coupling with the external thread of the diameter fi 16x1/2mm, with the Polish standard PN-EN ISO 21003, made of gold-coloured brass, is intended for the installation of the PEX pipeline in systems for the transmission of water for consumption, for the purposes of Heating systems (CO) and industrial water circuits. The coupling is characterized by total corrosion resistance, hi

The twisted PE coupling PN 10 SDR 17 with a diameter of fi 40mm, with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black with blue nuts, is intended for the construction of water and irrigation systems. It is characterized by high hydraulic tightness and quick and easy assembly. Connecting the coupling with the PE tube is done with a clamping ring, which covers and presses the pipe after

Thermal insulation cover with an inner diameter of 28mm, with 6mm wall, with Polish standard PN-EN 14313, made of ecologically foamed PE polyethylene in grey, produced in 2m sections, is designed for insulation of sanitary pipes, heating, Air conditioning, refrigeration and piping of steel, copper and plastic, installed in residential, administrative and industrial buildings. Thermal insulation m

The knee with an inner thread of diameter fi 32x1 ", angle 90 degrees, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for the installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 

Tee with inner thread diameter fi 25x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 

Welded with a diameter of fi 90mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 

Welded Knee diameter fi 90mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 

The sewer system with a diameter of fi 160mm, with the Polish standard AT-06-0602 B, made of polypropylene (PP) in grey, is designed for ventilation systems, mounted in a cup of sewer pipe. The exhaust is made of the highest quality plastic, which removes the duct gases after the building. 

Sewer pipe (foamed core) with a diameter of fi 250mm, with a wall of 6, 2mm in length of 3 meters, with Polish standard PN-EN 13476-2, made of poly (vinyl chloride) PVC, medium SN4, in orange, is intended for draining of impurities Outside the building. Pipes made of the highest quality plastic with a cup and gasket, consist of sturdy three layers.
NajLonger lengths of pipes we send by courier

The sewer pipe (solid) with a diameter of fi 160mm, with a 3, 2mm wall with a length of 4 meters, with the Polish standard PN EN 1329-1, made of poly (vinyl chloride) PVC, light type SN2, in Orange, is designed for draining the impurities outside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to chemical substances.
NLonger lengths of p

The sewer pipe with a diameter of 75mm, with a wall of 1, 9mm with a length of 2 meters, with the Polish standard PN-EN 12200, made of polyvinyl chloride PVC-U in grey, is intended for draining impurities inside the building and in underground systems. Pipes made of the highest quality plastic with a cup and gasket, can be combined with a wide range of sewer fittings.

The twisted tee with a diameter of fi 16mm, an angle of 90 degrees, with the Polish standard PN-EN ISO 21003, made of gold-coloured brass, is intended for the installation of PEX pipelines in installations for the transmission of water for consumption, for economic purposes and in Heating systems (CO) and industrial water circuits. The tee is characterized by total corrosion resistance, high dura

GASKET FOR FITTINGS PE PN 16 SDR 11 with a diameter of fi 63mm, with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

Elbow with internal thread of diameter fi 25x1/2 ", angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 

The welded reduction with a diameter of fi 32/50mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 

The sewer tee with a diameter of fi 110/110mm, an angle of 90 degrees, with the Polish standard PN EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to connect sewer pipes at different angles, draining impurities outside Building. The tee with a cup and gasket made of the highest quality plastics, is durable and resistant to heat. 

Sewer Pipe diameter fi 50mm, with Wall 1, 8mm with a length of 250mm, with Polish norm PN-EN 1451, made of polypropylene (PP) w kolorze szarym lub białym, przeznaczona jest do odprowadzania nieczystości wewnątrz budynku. Rury wykonane z tworzyw najwyższej jakości z kielichem i uszczelką, są wytrzymałe i odporne na wysoką temperaturę. 

A sewer tee with a diameter of fi 32/32mm, with a wall of 1, 8mm angle of 45 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining the impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.

The Stabil thermal insulation cover with an inner diameter of 18mm, with a wall of 9mm, with Polish standard PN-EN 14313, made of ecologically foamed PE polyethylene, coated with LDPE foil, in blue, produced in 2m sections, is intended for insulation Sanitary, heating, air conditioning, refrigeration and steel piping, copper and plastic pipes, mounted in residential, administrative and industrial

The Stabil thermal insulation cover with an inner diameter of 18mm, with a wall of 9mm, with Polish standard PN-EN 14313, made of ecologically foamed PE polyethylene, coated with LDPE film, in Red, produced in 2m sections, is designed for pipe insulation Sanitary, heating, air conditioning, refrigeration and steel, copper and plastic pipelines, mounted in residential, administrative and industria

Stabil Thermal insulation cover with an inner diameter of 28mm, with 6mm wall, with Polish standard PN-EN 14313, made of ecologically foamed PE polyethylene, coated with LDPE film, Blue, produced in discs of 10m, is intended for insulation Sanitary, heating, air conditioning, refrigeration and steel piping, copper and plastic pipes, mounted in residential, administrative and industrial buildings

The Stabil thermal insulation cover with an inner diameter of 28mm, with 6mm wall, with Polish standard PN-EN 14313, made of ecologically foamed PE polyethylene, coated with LDPE film, in Red, produced in discs of 10m, is intended for insulation Sanitary, heating, air conditioning, refrigeration and steel piping, copper and plastic pipes, mounted in residential, administrative and industrial buil

TP fully-draining drain pipe K2-Drain, SN 8 with a diameter of 6mb fi 110mm, with Polish standard PN-EN 13476-3, made of PE HD black polyethylene, is designed for drainage of land and areas around industrial areas, airports, roads and Motorways and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.

Sewer pipe, fi 40mm diameter, with wall 1, 8mm with a length of 500mm, with Polish norm PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat. 

The sewer plug with a diameter of fi 160mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for tight closure of the ends of the sewer systems outside the building. Cork made of the highest quality plastic, it is durable and resistant to heat.

The sewer muzzle with a diameter of fi 110mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The sliding with gasket made of the highest quality plastic, is durable and resistant to heat. 

PP-RCT welded reduction tee with a diameter of fi 25/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 

The Stabil thermal insulation cover with an inner diameter of 18mm, with a 6mm wall, with the Polish standard PN-EN 14313, made of ecologically foamed PE polyethylene, coated with LDPE film, in Blue, produced in discs of 10m, is intended for insulation Sanitary, heating, air conditioning, refrigeration and steel piping, copper and plastic pipes, mounted in residential, administrative and industri

The sewer muzzle with a diameter of fi 160mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The sliding with gasket made of the highest quality plastic, is durable and resistant to heat. 

The drain pipe in a 50mm diameter of 50MB, with the Polish norm AT/2009-03-2538, made of polyvinyl chloride PVC, is designed for drainage of land and areas around buildings and fields of sports pitches, farmlands, parks and meadows. The cover protects the pipe against clogging, providing a suitable filter layer so it can be used for underground drainage.

The sewer plug with a diameter of fi 75mm, with a wall of 1, 9mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for tight closure of the ends of the sewage systems inside the building. Cork made of the highest quality plastic, it is durable and resistant to heat.