Best sellers

Sewer Knee DN 110 Angle 90 degree (external)
Sewer Knee fi 110 angle 90 degrees - Z
The sewer knee with a diameter of fi 110mm, an angle of 90 degrees, with the Polish standard PN EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to connect sewer pipes at different angles, draining impurities outside Building. The knee with a cup and gasket made of the highest quality plastics, is durable and resistant to heat.
Details View details  
Thermal insulation PE Stabil fi 22/9mm section 2m (red)
Thermal insulation PE Stabil fi 22/9mm section 2m (red)
The Stabil thermal insulation cover with an inner diameter of 22mm, with a wall of 9mm, with Polish standard PN-EN 14313, made of ecologically foamed PE polyethylene, coated with LDPE film, in Red, produced in 2m sections, is designed for pipe insulation Sanitary, heating, air conditioning, refrigeration and steel, copper and plastic pipelines, mounted in residential, administrative and industria
Details View details  
Mounting plate for PP-R system
Out-of-Stock
Mounting plate for PP-R system
Small mounting plate. Mounting plate for knees GW and GZ With Hanger, Which  is used to precisely distribute the knees to fit the For the installation of faucet or screw-in tap. It weighs the element to make the installation of the Crane ran Without additional complications związanych z prawidłowym rozstawieniem gwintów podłączeniowych.The sheets have two sizes: Big  - typowa dla standartowych kr
Details View details  
PPR fi 25mm Mijanka
Out-of-Stock
Mijanka PP-R fi 25mm
A mijanka with a diameter of fi 25mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The Mijanka made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Sewer Knee DN 110 Angle 22 degree (internal)
Sewer Knee fi 110 Angle 22 degree
The sewer knee with a diameter of fi 110mm, with a wall of 2, 7mm angle 22 degrees, with the Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The knee with gasket made of the highest quality plastic, is durable and resistant to heat.
 
Details View details  
Welded reduction PPR fi 16/20mm
PP-R fi 16/20mm reduction
Welded reduction with a diameter of fi 16/20mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Sewer reduction DN 50/40 (internal)
Sewer reduction fi 50/40
The sewer reduction of the diameter fi 50/40mm, with a wall of 1, 8mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in Biazm color, is designed for joining sewage pipes, draining impurities inside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
< P align = "lEFT "> 
Details View details  
Sewer Connector DN 110 (internal)
Sewer Fitting FI 110
The sewer fitting with a diameter of fi 110mm, with a wall of 2, 7mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for joining sewage pipes, draining impurities inside the building. The coupling with gasket is made of the highest quality plastic, is durable and resistant to heat. 
Details View details  
Welded pipe PPR PN-20 fi 32mm
Welded pipe PP-R PN-20 fi 32mm
Welded pipe PPR PN-20 SDR-6 with a diameter of fi 32mm, with a wall of 5, 4mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and central Heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
Tub
Details View details  
Semi-screw with internal thread PP-R fi 32x1 "mm
Out-of-Stock
Semi-screw with internal thread PP-R fi 32x1
Semi-screw with inner thread diameter fi 32x1 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The semi-screw made of the highest quality plastics is durable and resistant to heat. 
Details View details  
PP-RCT-welded reduction fi 25/20mm
Out-of-Stock
PP-RCT-welded reduction fi 25/20mm
PP-RCT reduction welded with a diameter of fi 25/20mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded elbow PP-RCT fi 25mm angle 90 degrees
Out-of-Stock
Welded elbow PP-RCT fi 25mm angle 90 degrees
Welded knee PP-RCT diameter fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
with internal thread PP-RCT fi 20x1/2 mm
Out-of-Stock
with internal thread PP-RCT fi 20x1/2
with internal thread PP-RCT diameter fi 20x1/2 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Details View details  
PVC Drain pipe without holes DN 200 (30 MB scroll)
Out-of-Stock
PVC drain pipe without openings fi 200 (scroll 30 MB)
Drainage pipe without holes with a diameter of 200mm with a length of 30MB, with the Polish norm PN-C-89221:1998/AZ1, made of polyvinyl chloride PVC-U in yellow, is intended for drainage of land and areas around buildings and fields of sports pitches, farmlands Etc. Pipes made of the highest quality materials guarantee the protection against inflow of water in all areas of construction. 
W PCou
Details View details  
Sewer pipe with PP DN 50x1, 8x315mm (internal)
Sewer pipe with PP-H fi 50x1, 8x315mm
Sewer pipe, fi 50mm diameter, with 1, 8mm wall with a length of 315mm, with Polish norm PN-EN 1451, made of polypropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat. 
Details View details  
Sewer Tee DN 50/50 angle 67 degrees (internal)
Sewer Tee fi 50/50 angle 67 degrees
Sewer tee with diameter fi 50/50mm, with wall 1, 8mm angle 67 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, it is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Welded Reducer Tee PPR fi 32/25mm angle 90 degrees
Out-of-Stock
Welded Reducer Tee PPR fi 32/25mm angle 90 degrees
Welded reduction tee with a diameter of fi 32/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Sewer reduction DN 75/50 (internal)
Sewer reduction fi 75/50
The sewer reduction with a diameter of fi 75/50mm, with a wall of 1, 9mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for joining sewage pipes, draining impurities inside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
< P align = "lEFT "> 
Details View details  
Thermal insulation PE Stabil fi 22/9mm section 2m (blue)
Thermal insulation PE Stabil fi 22/9mm section 2m (blue)
The Stabil thermal insulation cover with an inner diameter of 22mm, with a wall of 9mm, with Polish standard PN-EN 14313, made of ecologically foamed PE polyethylene, coated with LDPE foil, in blue, produced in 2m sections, is intended for insulation Sanitary, heating, air conditioning, refrigeration and steel piping, copper and plastic pipes, mounted in residential, administrative and industrial
Details View details  
Welded pipe PPR PN-16 fi 20mm
Out-of-Stock
Welded pipe PP-R PN-16 fi 20mm
Welded pipe PPR PN-16 SDR-7.4 with a diameter of fi 20mm, with a wall of 2, 8mm with a length of 4 meters, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene in white or grey, is designed for the installation of cold and hot water and Central heating and other sanitary installations. Pipes made of the highest quality plastics can be combined with a wide range of fittings. 
T
Details View details  
PVC Sewer pipe DN 110x3, 2x3000mm (outer-solid)
Out-of-Stock
PVC Sewer pipe fi 110x3, 2x3000mm solid
The sewer pipe (solid) with a diameter of fi 110mm, with a 3, 2mm wall with a length of 3 meters, with the Polish standard PN EN 1329-1, made of poly (vinyl chloride) PVC, light type SN2, in Orange, is designed for draining the impurities outside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to chemical substances.
NLonger lengths of p
Details View details  
Sewer Knee DN 110 Angle 30 degree (external)
Sewer Knee fi 110 angle 30 degrees - Z
The sewer knee with a diameter of fi 110mm, an angle of 30 degrees, with the Polish standard PN EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to connect sewer pipes at different angles, draining impurities outside Building. The knee with a cup and gasket made of the highest quality plastics, is durable and resistant to heat.
Details View details  
PVC Sewer pipe DN 32x1, 8x1000mm (internal)
Out-of-Stock
PVC Sewer pipe fi 32x1, 8x1000mm
The sewer pipe is fi 32mm in diameter, with a 1-metre-long, 8mm wall, with the Polish standard PN-EN 12200, made of PVC-U polyvinyl chloride in white, is designed for draining impurities inside the building and in underground systems. Pipes made of the highest quality plastic with a cup and gasket, can be combined with a wide range of sewer fittings.
Details View details  
Sewer reduction DN 50/32 (internal)
Sewer reduction fi 50/32
Sewer reduction with a diameter of fi 50/32mm, with a wall of 1, 8mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in Biazm color, is designed for joining sewage pipes, draining impurities inside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
< P align = "lEFT "> 
Details View details  
PP-RCT fi 32/25mm welded reduction
Out-of-Stock
PP-RCT fi 32/25mm welded reduction
PP-RCT reduction with fi 32/25mm diameter, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Heat-insulating cover PE fi 22/6mm disc 10MB (red)
Heat-insulating cover PE fi 22/6mm disc 10MB (red)
The Stabil thermal insulation cover with an inner diameter of 22mm, with 6mm wall, with Polish standard PN-EN 14313, made of ecologically foamed PE polyethylene, coated with LDPE film, in Red, produced in discs of 10m, is intended for insulation Sanitary, heating, air conditioning, refrigeration and steel piping, copper and plastic pipes, mounted in residential, administrative and industrial buil
Details View details  
Sewer Tee DN 50/50 angle 45 degrees (internal)
Sewer Tee fi 50/50 angle 45 degrees
Sewer tee with diameter fi 50/50mm, with wall 1, 8mm angle 45 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, it is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
PVC Sewer pipe DN 110x3, 2x500mm (outer-solid)
PVC Sewer pipe fi 110x3, 2x500mm solid - SN8
Sewer pipe (solid) with a diameter of fi 110mm, with a wall of 3, 2mm with a length of 500mm, with Polish standard PN EN 1401-1:1999, made of poly (vinyl chloride) PVC, type heavy SN8, in Orange, is intended for draining impurities outside Building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to chemical substances.
Details View details  
PP-RCT fi 32/20mm weld Reduction
Out-of-Stock
PP-RCT fi 32/20mm weld Reduction
PP-RCT reduction welded with a diameter of fi 32/20mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded PPR fi 16mm
Welded PP-R fi 16mm
Welded with a diameter of fi 16mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
Details View details  
Welded Knee PPR fi 16mm angle 45 degrees
Welded elbow PP-R fi 16mm angle 45 degrees
Welded knee diameter fi 16mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Screw with internal thread PPR fi 25x1 "mm
Screw with internal thread PP-R fi 32x1
A screw with an inner thread of diameter fi 32x1 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Semi-screw with internal thread PPR fi 20x3/4 "mm
Semi-screw with internal thread PP-R fi 20x3/4
Semi-screw with inner thread diameter fi 20x3/4 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The semi-screw made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Screw with external thread PPR fi 20x1/2 "mm
Screw with external thread PP-R fi 20x1/2
Screw with external thread diameter fi 20x1/2 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
Details View details  
Sewer pipe with PP DN 40x1, 8x2000mm (internal)
Out-of-Stock
Sewer pipe with PP fi 40x1, 8x2000mm
Sewer pipe with a diameter of 1, 8mm with a length of 2 meters, with Polish norm PN-EN 1451, made of POlipropylene (PP) In grey or white, it is designed for draining impurities inside the building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to heat. 
Details View details  
PPR fi 32mm Plug
PP-R plug fi 32mm
PPR fi 32mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant. 
Details View details