Best sellers

Compensation PP-R fi 25mm
Compensation PP-R fi 25mm
Welded compensation with a diameter of fi 25mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. Loop compensation for thermal elongation is made of the highest quality plastics.
Details View details  
Heat-insulating cover PE fi 28/4mm disc 10MB (blue)
Heat-insulating cover PE fi 28/4mm disc 10MB (blue)
The Stabil thermal insulation cover with an inner diameter of 28mm, with a 4mm wall, with the Polish standard PN-EN 14313, made of ecologically foamed PE polyethylene, coated with LDPE film, in Blue, produced in discs of 10m, is intended for insulation Sanitary, heating, air conditioning, refrigeration and steel piping, copper and plastic pipes, mounted in residential, administrative and industri
Details View details  
Corrugated pipe (structural) with PP SN 10 DN/ID 400x6000mm
Out-of-Stock
Pass-through pipe (double walled) PP SN 10 DN/ID 400x6000mm
Corrugated pipe (structural) with an internal diameter fi 400mm with a length of 3 meters, with the Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy type SN 10, in Orange, is designed for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Details View details  
PPR fi 90mm Plug
Out-of-Stock
Cap PP-R fi 90mm
PPR fi 90mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant. 
Details View details  
PPR fi 75mm Cover cap
Out-of-Stock
PP-R fi 75mm cap
PPR fi 75mm cap, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant. 
Details View details  
with external thread PPR fi 75x2
Out-of-Stock
with external thread PP-R fi 75x2
with external thread with a diameter of fi 75x2, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Details View details  
with internal thread PP fi 16x1/2 mm
with internal thread PP-R fi 16x1/2
with Internal thread fi 16x1/2 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
Details View details  
PVC Drain pipe without holes DN 125 (Coil 50 MB)
Out-of-Stock
PVC drain pipe without holes fi 125 (coil 50 MB)
Drainage pipe without holes with a diameter of 125mm with a length of 50MB, with the Polish norm PN-C-89221:1998/AZ1, made of polyvinyl chloride PVC-U in yellow, is intended for drainage of land and areas around buildings and fields of sports pitches, farmlands Etc. Pipes made of the highest quality materials guarantee the protection against inflow of water in all areas of construction. 
W PCou
Details View details  
PVC Drain pipe without holes DN 100 (Coil 50 MB)
Out-of-Stock
PVC drain pipe without holes fi 100 (coil 50 MB)
Drainage pipe without holes with a diameter of 100mm with a length of 50MB, with the Polish norm PN-C-89221:1998/AZ1, made of polyvinyl chloride PVC-U in yellow, is intended for dewatering of land and areas around buildings and fields of sports pitches, farmlands Etc. Pipes made of the highest quality materials guarantee the protection against inflow of water in all areas of construction. 
Details View details  
PVC Drain pipe without holes DN 50 (coil 50 MB)
Out-of-Stock
PVC drain pipe without holes fi 50 (coil 50 MB)
Drainage pipe without holes with a diameter of 50mm with a length of 50MB, with the Polish norm PN-C-89221:1998/AZ1, made of polyvinyl chloride PVC-U in yellow, is intended for dewatering of land and areas around buildings and fields of sports pitches, farmlands Etc. Pipes made of the highest quality materials guarantee the protection against inflow of water in all areas of construction. 
Details View details  
Drainage four PP DN 100/100/100/100mm Angle 90
Drainage four PP DN 100/100/100/100mm Angle 90
Drainage four with a diameter of fi 100/100/100/100mm, angle 90 degrees, with the Polish norm, ETC. AT/18-2014-0025-02, made of PP polypropylene in grey or orange, is designed to connect drainage pipes dewatering the land and areas around Buildings. The four-piece made of high-quality plastics guarantees protection against water inflow in all areas of construction. 
Details View details  
Drain tee PP DN 160/100 Angle 90
Out-of-Stock
Drain tee PP DN 160/100 Angle 90
Drainage tee with a diameter of 160/100mm, angle 90 degrees, with the Polish standard < span>ETC AT/18-2014-0025-02, made of polypropylene (PP) in Orange, is designed to connect drain pipes at an angle of 90 degrees. The drainage tee made of the highest quality plastic guarantees protection against the inflow of water in all areas of civil and water construction.
Details View details  
PVC Sleeves DN 160
Out-of-Stock
PVC Sleeves DN 160
The pressure slide with a diameter of fi 160mm, with the Polish standard PN-EN ISO 1452-2, made of polyvinyl chloride PVC-U in black, is intended for joining pressure pipes which transmit drinking water. The CAP with a cup and gasket made of the highest quality plastics allows to carry out the proper installation of a sealed water supply network, moreover, it is durable and resistant to corrosion
Details View details  
Single Arch 45 ° DN 110mm
Out-of-Stock
Single Arch 45 ° DN 110mm
A single-socket bow with a diameter of 110mm, an angle of 45 degrees with the Polish standard PN-EN ISO 1452-2, made of poly (vinyl chloride) PVC in black, is designed to connect pressure pipes at different angles, draining treated drinking water. The bow with gasket made of the highest quality plastic, is durable and resistant to mechanical damage.
Details View details  
Sewer reduction DN 200/160 (external)
Sewer reduction fi 200/160
The sewer reduction with a diameter of fi 200/160mm, with the Polish standard PN-EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed for joining sewage pipes, draining the impurities outside the building. The reduction with the gasket made of the highest quality plastics, is durable and resistant to heat.
Details View details  
Sewer Tee DN 250/250 angle 90 degrees (external)
Out-of-Stock
Sewer Tee fi 250/250 angle 90 degrees
The sewer tee with a diameter of fi 250/250mm, an angle of 90 degrees, with the Polish standard PN EN 1401-1:1999, made of polypropylene (PP) in Orange, is designed to connect sewer pipes at different angles, draining impurities outside Building. The tee with a cup and gasket made of the highest quality plastics, is durable and resistant to heat. 
Details View details  
PVC Sewer pipe DN 110x3, 2x3000mm (outer-solid)
Out-of-Stock
PVC Sewer pipe fi 110x3, 2x3000mm solid - SN8
Sewer pipe (solid) with a diameter of fi 110mm, with a 3, 2mm wall with a length of 3 meters, with the Polish standard PN EN 1401-1:1999, made of poly (vinyl chloride) PVC, type heavy SN8, in Orange, is designed for draining impurities outside Building. Pipes made of the highest quality plastic with a cup and gasket, are durable and resistant to chemical substances.
Longer lengths of pipes that
Details View details  
PVC Sewer pipe DN 400x7, 9x2000mm (outer-foamed core)
Out-of-Stock
PVC Sewer pipe fi 400x7, 9x2000mm
Sewage pipe (foamed core) with a diameter of fi 400mm, with a wall of 7, 9mm in length of 2 meters, with Polish standard PN-EN 13476-2, made of poly (vinyl chloride) PVC, light type SN2, in Orange, is intended for draining of impurities Outside the building. Pipes made of the highest quality plastic with a cup and gasket, consist of sturdy three layers.
Details View details  
PVC Sewer pipe DN 315x6, 2x1000mm (outer-foamed core)
Out-of-Stock
PVC Sewer pipe fi 315x 6, 2x1000mm
Sewer pipe (foamed core) with a diameter of fi 315mm, with a wall of 6, 2mm with a length of 1 meter, with the Polish standard PN-EN 13476-2, made of poly (vinyl chloride) PVC, light type SN2, in Orange, is designed for draining impurities Outside the building. Pipes made of the highest quality plastic with a cup and gasket, consist of sturdy three layers.
Details View details  
PVC Drain Pipe DN 65 (Coil 50 MB)
Out-of-Stock
PVC Drain Pipe fi 65 (Coil 50 MB)
Drainage pipe with a diameter of 65mm with a length of 50MB, with the Polish norm PN-C-89221:1998/AZ1, made of polyvinyl chloride PVC-U in yellow, is intended for drainage of land and areas around buildings and fields of sports pitches, farmlands, parks and Meadows. Pipes made of the highest quality materials guarantee the protection against inflow of water in all areas of construction. 
Details View details  
Sewage attacher DN 50x75 cast iron (internal)
Sewer attacher fi 50x75 cast iron
The sewer, cast iron with a diameter of fi 50/75mm, with a wall of 1, 8mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for the installation of internal sewer, draining impurities in the building. The high-quality plastic attacher is durable and heat resistant.
Details View details  
Sewage cleaning-Revision DN 75 (internal)
Sewage Cleaning-Fi 75
The sewer cleaner with a diameter of 75mm, with a wall of 1, 9mm, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed for inspection of the inside of the pipeline, draining the impurities inside the building. The Cleaner with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Sewer Tee DN 75/50 angle 67 degrees (internal)
Sewer Tee fi 75/50 angle 67 degrees
The sewer tee with a diameter of fi 75/50mm, with a wall of 1, 8mm angle of 67 degrees, with Polish standard PN-EN 1451-1, made of polypropylene (PP) in grey, is designed to connect sewer pipes at different angles, draining impurities inside Building. The tee with gasket made of the highest quality plastic, is durable and resistant to heat.
Details View details  
Cap (cover cap) PE100 PN 16 fi 25mm
Out-of-Stock
Cap (cover cap) PE100 PN 16 fi 32mm
The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 32mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Welding Tee PP-RCT fi 40/25mm angle 90 degrees
Out-of-Stock
Welding Tee PP-RCT fi 40/25mm angle 90 degrees
PP-RCT welded reduction tee, diameter fi 40/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Details View details  
Sectional Tee Angled reducing fi 90/63/90 angle 45 ° PN 16
Out-of-Stock
Sectional Tee Angle Reduction fi 90/90/63mm Angle 45 ° PN 16
Segmented tee Angled reducing PE HD 100 PN 16 SDR 17 diameter FI 90/63/90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) in black with blue stripes, is designed for the transmission of treated water Drinking water and social-household sewage. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 160 angle 45 ° PN 16
Out-of-Stock
Segmented Tee angle fi 160 angle 45 ° PN 16
Segmented tee angle PE HD 100 PN 10 SDR 17 with a diameter of fi 160mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and of social and cultural wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 90 Angle 45 ° PN 16
Out-of-Stock
Segmented Tee angle fi 90 Angle 45 ° PN 16
Segmented tee angle PE HD 100 PN 10 SDR 17 with diameter fi 90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and of social and cultural wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Segmented Tee angle fi 90 Angle 45 ° PN 10
Out-of-Stock
Segmented Tee angle fi 90 Angle 45 ° PN 10
Segmented tee angle PE HD 100 PN 10 SDR 17 with diameter fi 90mm, angle 45 degrees, with Polish standard PN-EN 12201-3 + A 1.2013-05P, made of polyethylene (PE HD) black with blue stripes, is designed for the transfer of treated drinking water and of social and cultural wastewater. Tees made of the highest quality plastics can be combined with a wide range of pressure pipes.
Details View details  
Drain pipe PP DN 160mm TP (360 °) SN8 (6 m section)
Out-of-Stock
Drain pipe PP DN 160mm TP (360 °) SN8 (6 m section)
TP Drain Pipe (360st perforation) fully sown, SN 8 with a diameter of 6mb fi 160mm, with the Polish standard PN-EN 13476-3, made of PP polypropylene in black or orange, is designed for dewatering land and areas around the sites Airports, roads and motorways, and farmland, etc. Pipes made of high-quality plastics guarantee protection against water inflow.
Details View details  
Pipe Spring fi 20mm
Pipe Spring fi 20mm
The spring for Pipes fi 20mm, with the Polish standard PN-EN ISO 21003, made of gold-coloured brass, is intended for the installation of PEX pipelines in systems for the transmission of water for consumption, for economic purposes and in heating installations (CO) and Industrial water circuits. The knee is characterized by total corrosion resistance, high durability and does not affect the qualit
Details View details  
Pipe Spring fi 16mm
Pipe Spring fi 16mm
The spring for pipes fi 16mm, with the Polish standard PN-EN ISO 21003, made of gold-coloured brass, is intended for the installation of PEX pipelines in systems for the transmission of water for consumption, for economic purposes and in heating installations (CO) and Industrial water circuits. The knee is characterized by total corrosion resistance, high durability and does not affect the qualit
Details View details  
Straight connector GZ PEX fi 25x1 "mm
Straight connector GZ PEX fi 25x1 "mm
A straight clamp with external thread with a diameter of fi 25x1 "MM, with the Polish standard PN-EN ISO 21003, made of gold-coloured brass, is designed for the installation of the PEX pipeline in systems for the transmission of water for consumption, for the purposes of Heating systems (CO) and industrial water circuits. The coupling is characterized by total corrosion resistance, high durabilit
Details View details  
Twisted straight nipple GZ PEX 20x3/4 "mm
Twisted straight nipple GZ PEX 20x3/4 "mm
The straight screw coupling with external thread with a diameter of fi 20x3/4 "MM, with the Polish standard PN-EN ISO 21003, made of gold-coloured brass, is intended for the installation of the PEX pipeline in systems for the transmission of water for consumption, for the purposes of Heating systems (CO) and industrial water circuits. The coupling is characterized by total corrosion resistance, h
Details View details  
Straight connector GZ PEX 16x3/4 "mm
Straight connector GZ PEX 16x3/4 "mm
The straight screw connection with external thread with a diameter of fi 16x3/4mm, with the Polish standard PN-EN ISO 21003, made of gold-coloured brass, is intended for the installation of the PEX pipeline in systems for the transmission of water for consumption, for the purposes of Heating systems (CO) and industrial water circuits. The coupling is characterized by total corrosion resistance, h
Details View details  
Twisted Straight connector GW PEX 20x3/4 "mm
Twisted Straight connector GW PEX 20x3/4 "mm
The straight screw coupling with the inner thread of the diameter fi 20x3/4 "MM, with the Polish standard PN-EN ISO 21003, made of gold-coloured brass, is intended for the installation of the PEX pipeline in systems for the transmission of water for consumption, for the purposes of Heating systems (CO) and industrial water circuits. The coupling is characterized by total corrosion resistance, hig
Details View details