Twisted Fittings PE

GASKET FOR FITTINGS PE PN 16 SDR 11 with a diameter of fi 16mm, with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The pressure ring for PE PN 16 SDR 11 with a diameter of fi 16mm, with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The clamp with internal thread for pipes PE PN 10 SDR 17 with a diameter of fi 20x1/2 ", with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly, allows to anchoring the pipe at the Anchorage point. The locking bolts are secured with washers to prevent them from falling out.

GASKET FOR FITTINGS PE PN 16 SDR 11 with a diameter of fi 20mm, with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The pressure ring for PE PN 16 SDR 11 fittings with a diameter of fi 20mm, with the standard UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The clamp with internal thread for pipes PE PN 10 SDR 17 with a diameter of fi 25x1/2 ", with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly, allows to anchoring the pipe at the Anchorage point. The locking bolts are secured with washers to prevent them from falling out.

GASKET FOR FITTINGS PE PN 16 SDR 11 with diameter fi 25mm, with standard UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The pressure ring for PE PN 16 SDR 11 with fi 25mm diameter, UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The clamp with internal thread for pipes PE PN 10 SDR 17 with a diameter of fi 25x3/4 ", with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly, allows to anchoring the pipe at the Anchorage point. The locking bolts are secured with washers to prevent them from falling out.

GASKET FOR FITTINGS PE PN 16 SDR 11 with a diameter of fi 32mm, with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The pressure ring for PE PN 16 SDR 11 with a diameter of fi 32mm, with the standard UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The pipe clamp with internal thread for PE PN 10 SDR 17 with a diameter of fi 32x1/2 "is made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly, allows to anchoring the pipe at the Anchorage point. The locking bolts are secured with washers to prevent them from falling out.

GASKET FOR FITTINGS PE PN 16 SDR 11 with a diameter of fi 40mm, with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The pressure ring for PE PN 16 SDR 11 fittings with a diameter of fi 40mm, with the standard UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The clamp with internal thread for pipes PE PN 10 SDR 17 with a diameter of fi 32x3/4 ", with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly, allows to anchoring the pipe at the Anchorage point. The locking bolts are secured with washers to prevent them from falling out.

GASKET FOR FITTINGS PE PN 16 SDR 11 with diameter fi 50mm, with standard UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The pressure ring for PE PN 16 SDR 11 with a diameter of fi 50mm, with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The pipe clamp with female thread for PE PN 10 SDR 17 with a diameter fi 40x1/2 "Made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly, allows to anchoring the pipe at the Anchorage point. The locking bolts are secured with washers to prevent them from falling out.

GASKET FOR FITTINGS PE PN 16 SDR 11 with a diameter of fi 63mm, with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The pressure ring for PE PN 16 SDR 11 fittings with a diameter of fi 63mm, with the standard UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The pipe clamp with internal thread for PE PN 10 SDR 17 diameter fi 40x1 "is made of polyethylene (PE HD) in black, is designed for the construction of plumbing and irrigation systems. It is characterized by quick and easy assembly, allows to anchoring the pipe at the Anchorage point. The locking bolts are secured with washers to prevent them from falling out.

GASKET FOR FITTINGS PE PN 16 SDR 11 with a diameter of 75mm, with the standard UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The pressure ring for PE PN 16 SDR 11 with a diameter of 75mm, with the standard UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The pipe clamp with female thread for PE PN 10 SDR 17 with a diameter fi 40x3/4 "Made of polyethylene (PE HD) in Black is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly, allows to anchoring the pipe at the Anchorage point. The locking bolts are secured with washers to prevent them from falling out.

GASKET FOR FITTINGS PE PN 16 SDR 11 with diameter fi 90mm, with standard UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The pressure ring for PE PN 16 SDR 11 with diameter fi 90mm, with standard UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The inner thread clamp for PE PN 10 SDR 17 with a diameter of fi 50x1/2 "Made of polyethylene (PE HD) in black is intended for the construction of water and irrigation systems. It is characterized by quick and easy assembly, allows to anchoring the pipe at the Anchorage point. The locking bolts are secured with washers to prevent them from falling out.

GASKET FOR FITTINGS PE PN 16 SDR 11 with a diameter of fi 110mm, with the norm UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The pressure ring for PE PN 16 SDR 11 fittings with a diameter of fi 110mm, with the standard UNI-ISO 7/1, made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly.

The clamp with internal thread for pipes PE PN 10 SDR 17 with a diameter fi 50x1 "made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly, allows to anchoring the pipe at the Anchorage point. The locking bolts are secured with washers to prevent them from falling out.

The pipe clamp with female thread for PE PN 10 SDR 17 with a diameter of fi 50x3/4 "Made of polyethylene (PE HD) in black is intended for the construction of water and irrigation systems. It is characterized by quick and easy assembly, allows to anchoring the pipe at the Anchorage point. The locking bolts are secured with washers to prevent them from falling out.

The pipe clamp with female thread for PE PN 10 SDR 17 with a diameter of fi 63x1/2 "Made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly, allows to anchoring the pipe at the Anchorage point. The locking bolts are secured with washers to prevent them from falling out.

The pipe clamp with female thread for PE PN 10 SDR 17 with a diameter of fi 63x1 "made of polyethylene (PE HD) in Black is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly, allows to anchoring the pipe at the Anchorage point. The locking bolts are secured with washers to prevent them from falling out.

The pipe clamp with internal thread for PE PN 10 SDR 17 with a diameter of fi 63x3/4 "is made of polyethylene (PE HD) in black, is designed for the construction of water and irrigation systems. It is characterized by quick and easy assembly, allows to anchoring the pipe at the Anchorage point. The locking bolts are secured with washers to prevent them from falling out.