PE HD Butt Fittings

PE HD Butt Fittings

Subcategories

PN 10
PN 10
PN 16
PN 16

Active filters

Butt elbow Long PE100 PN 10 fi 280 Angle 90 °
Out-of-Stock
Butt elbow Long PE100 PN 10 fi 280 Angle 90 °
The butt elbow of the long PE 100 is PN 10 SDR 17, with a diameter of fi 280mm, an angle of 90 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 16 fi 280 Angle 15 °
Out-of-Stock
Butt elbow Long PE100 PN 16 fi 280 Angle 15 °
Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 280mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 10 fi 280 Angle 45 °
Out-of-Stock
Butt elbow Long PE100 PN 10 fi 280 Angle 45 °
Butt elbow Long PE 100, PN 10 SDR 17 with a diameter of fi 280mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt Knee Long PE100 PN 16 fi 280 Angle 90 °
Out-of-Stock
Butt Knee Long PE100 PN 16 fi 280 Angle 90 °
Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 280mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt Knee Long PE100 PN 16 fi 280 Angle 45 °
Out-of-Stock
Butt Knee Long PE100 PN 16 fi 280 Angle 45 °
Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 280mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 16 fi 280 Angle 30 °
Out-of-Stock
Butt elbow Long PE100 PN 16 fi 280 Angle 30 °
Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 280mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 280 Angle 90 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 280 Angle 90 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 280mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 280 angle 60 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 280 angle 60 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 280mm, angle 60 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 280 Angle 45 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 280 Angle 45 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 280mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 280 Angle 30 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 280 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with diameter fi 280mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 280 Angle 22 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 280 Angle 22 °
Moulded Arch PE 100 PN 10 SDR 17 with diameter fi 280mm, angle 22 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Moulded arch PE100 PN 10 fi 280 Angle 11 °
Out-of-Stock
Moulded arch PE100 PN 10 fi 280 Angle 11 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 280mm, angle 11 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 280 Angle 90 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 280 Angle 90 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 280mm, angle 90 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 280 angle 60 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 280 angle 60 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 280mm, angle 60 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 280 Angle 45 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 280 Angle 45 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 280mm, angle 45 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 280 Angle 30 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 280 Angle 30 °
Moulded Arch PE 100, PN 16 SDR 11 with a diameter of fi 280mm, an angle of 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 280 Angle 22 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 280 Angle 22 °
Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 280mm, angle 22 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Parallel tee PE100 PN 10 fi 280mm
Out-of-Stock
Parallel tee PE100 PN 10 fi 280mm
The parallel tee PE100 PN 10 SDR 17 with a diameter of fi 280mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Molted Bow PE100 PN 16 fi 280 Angle 11 °
Out-of-Stock
Molted Bow PE100 PN 16 fi 280 Angle 11 °
Moulded Arch PE 100, PN 16 SDR 11 with a diameter of fi 280mm, an angle of 11 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Parallel Tee PE100 PN 16 fi 20mm
Out-of-Stock
Parallel Tee PE100 PN 16 fi 280mm
The parallel tee PE100 PN 16 SDR 11 with a diameter of fi 280mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Cap (cover cap) PE100 PN 10 fi 50mm
Out-of-Stock
Cap (cover cap) PE100 PN 10 fi 280mm
The cap (CAP) PE100 PN 10 SDR 17 with a diameter of fi 280mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Cap (cover cap) PE100 PN 16 fi 25mm
Out-of-Stock
Cap (cover cap) PE100 PN 16 fi 280mm
The cap (CAP) PE100 PN 16 SDR 11 with a diameter of fi 280mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 10 fi 90 Angle 30 °
Out-of-Stock
Butt elbow Long PE100 PN 10 fi 280 Angle 30 °
Butt elbow Long PE 100 PN 10 SDR 17 diameter fi 280mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Butt elbow Long PE100 PN 10 fi 90 Angle 30 °
Out-of-Stock
Butt elbow Long PE100 PN 10 fi 280 Angle 15 °
Butt elbow Long PE 100 PN 10 SDR 17 diameter fi 280mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Flange bushing PE100 PN 16 fi 280mm
Out-of-Stock
Flange bushing PE100 PN 16 fi 280mm
Flange sleeve PE100 PN 16 SDR 11 with a diameter of fi 280mm with the standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details  
Flange bushing PE100 PN 10 fi 280mm
Out-of-Stock
Flange bushing PE100 PN 10 fi 280mm
Flange bushing PE100 PN 10 SDR 17 with a diameter of fi 280mm with standard EN 1555, 12201, made of high density polyethylene in black, is designed for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Details View details