PE HD Butt Fittings

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 90mm, an angle of 15 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 with a diameter of fi 32mm, angle of 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 40mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 50mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 with a diameter of fi 63mm, angle of 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 75mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 90mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 with a diameter of fi 110mm, angle of 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt Knee Long PE 100 PN 16 SDR 11 with fi 125mm diameter, 15 degree angle with EN 1555 standard, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and ground. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 140mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 with a diameter of fi 160mm, angle of 15 degrees with EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 180mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt Knee Long PE 100 PN 16 SDR 11 with fi 200mm diameter, 15 degree angle with EN 1555 standard, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 225mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 with a diameter of fi 250mm, angle of 15 degrees with EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 280mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 16 SDR 11 diameter fi 315mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 10 SDR 17 with a diameter of fi 110mm, angle of 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 10 SDR 17 diameter fi 125mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 140mm, an angle of 15 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 10 SDR 17 diameter fi 160mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 10 SDR 17 with a diameter of fi 180mm, angle of 15 degrees with EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 10 SDR 17 diameter fi 200mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

The butt knee Long PE 100 is PN 10 SDR 17 with a diameter of fi 225mm, an angle of 15 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 10 SDR 17 with a diameter of fi 250mm, angle of 15 degrees with EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 10 SDR 17 diameter fi 280mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

Butt elbow Long PE 100 PN 10 SDR 17 diameter fi 315mm, angle 15 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.