Molted Bow PE100 PN 16 fi 63 Angle 22 °
zoom_out_map
chevron_left chevron_right
Out-of-Stock

Molted Bow PE100 PN 16 fi 63 Angle 22 °

Moulded Arch PE 100 PN 16 SDR 11 with a diameter of fi 63mm, angle 22 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.

4LPN166322
Color
Black
Diameter
63mm
Angle
22 °
Operating pressure
10 bar Gas/16 bar water
Standard
EN1555 and EN12201
Types
Polyethylene (PE HD)
Apply
PE HD Water Supply network
Ask about the product
Individual Approach
Have questions? We are here for you
Competitive Prices
High quality, attractive prices.
Express Implementation
Don't wait, we process immediately.
Versatile Offer
Offer for everyone, delivery across Europe.

Butt fittings

We offer butt-welded fittings made of high density polyethylene. This material is the most popular and most often used in the construction of underground and above ground systems intended for water and gas transmission. It does not show any negative impact on food products and human physiology, which allows its presence in similar systems.

PE polyethylene and its application

For the production of fittings, only PE100 polyethylene with the highest flexibility and thermo-plasticity is used. It is a construction material resulting from the polymerization of ethylene. It is distinguished by high resistance to shock loads and a large range of operating temperatures allowing to carry out work at any time of the year. Butt welding allows the pipeline to be made of only one solid material.

Its use is distinguished by:

  • municipal and industrial installations

  • dairies
  • cold brine pipelines
  • compressed air
  • swimming pools
  • gas and water distribution networks
  • Food industry
  • equipment installations and construction

Advantages of butt fittings:

  • High durability

  • High abrasion resistance
  • Low coefficient of friction
  • Resistance to cracking, abrasion, and mechanical damage
  • Resistance to corrosive agents found in soil
  • Stray current resistance
  • Low specific weight
  • Ability to effectively damp vibrations

Polyfusion welding

To make the pipeline made of PE, a welding machine with a muff and a polyfusion mandrel is used. With the help of this tool, connecting the tip with individual elements by heating to the right temperature allows you to mechanically press one part into another. The PE butt welding system as well as the welding machine itself have parameters set in such a way as to obtain a uniform, durable connection in the end.

Butt welding

The polyethylene fittings we propose are combined with the use of welding techniques using a special butt welding machine. The butt welding technique is primarily intended for joining pipes and fittings with large diameter dimensions. The welding procedure is based on increasing the temperature of the pipe face and the fitting, and then welding them together using mechanical pressure. This method allows the pipeline to be made of a single joint, which ensures permanent tightness. As a result of the current flowing through it, heat is generated, which results in an increase in the plasticity of the outer surface of the pipe and the inner surface of the fitting. Plastics penetrate each other, and when their temperature decreases, they acquire a uniform structure.

Butt fittings made of PE 100 can be welded in the MFR range (0.2-, 09) g / 10 min with all pipes in accordance with EN 1555 and EN 12201 standards. For DVS 2203-4 weld with MFR value outside the MFR range indicated above , must be determined in advance.

4LPN166322
Color
Black
Diameter
63mm
Angle
22 °
Operating pressure
10 bar Gas/16 bar water
Standard
EN1555 and EN12201
Types
Polyethylene (PE HD)
Apply
PE HD Water Supply network

Every product showcased in our online catalog comes with a standard warranty, attesting to its quality and reliability. We strive to ensure that every offer in the water and sewage sector stands as a testament to our commitment to reliability and trust for our customers.

We recognize that different projects might require specific warranty solutions. Thus, in response to individual needs, we offer the possibility to customize warranty terms. Should you wish to discuss the details of an individual warranty, we encourage you to contact us directly.

Our top priority is to give you the confidence that by choosing products from our catalog, you are opting for tried-and-true, durable solutions.

Fluctuations in raw material prices directly influence costs in the water and sewage industry. For this reason, all our quotes are made individually to reflect the current market situation.

We strive to offer our customers competitive prices while maintaining high product quality. Thanks to our individual approach to each inquiry, we provide attractive discounts and optimal purchasing conditions.

If you are interested in our offer, please contact us. We will happily prepare a quote for you, considering favorable conditions. Our flexibility ensures satisfaction with every purchase.

chat Comments (0)