K2-Kan Pass Tees with PP

Tees

A wide selection of K2-Kan corrugated tees with PP with different dimensions and operating parameters for installation of sewage systems, draining of household and commercial sewage. It consists of tees in diameters ranging from fi 160mm to fi 1000mm in Orange. 

Flake Tee (structural) with PP DN 160/160 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 160/160mm, angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 160/160 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 160/160mm, angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 200/160 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 200/160mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 200/160 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 200/160mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 200/200 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 200/200mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 200/200 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 200/200mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 250/200 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 250/200mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 250/200 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 250/200mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 250/250 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 250/250mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 250/250 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 250/250mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 300/200 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 300/200mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 300/200 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 300/200mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 300/250 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 300/250mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 300/250 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 300/250mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 300/300 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 300/300mm angle 90 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 300/300 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 300/300mm angle 45 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 400/200 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 400/200mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 400/200 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 400/200mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 400/250 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 400/250mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 400/250 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 400/250mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 400/300 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 400/300mm angle 90 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 400/300 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 400/300mm angle 45 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 500/200 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 500/200mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 400/400 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 400/400mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 500/250 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 500/250mm angle 90 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 500/200 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 500/200mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 500/300 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 500/300mm angle 90 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 500/250 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 500/250mm angle 45 degrees, with a departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 500/400 angle 90 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 500/400mm angle 90 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
Flake Tee (structural) with PP DN 500/300 angle 45 degrees
Corrugated Tee (structural) K2-Kan with a diameter of 500/300mm angle 45 degrees, with the departure to the pass pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary sewer and Combined. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.