Pass-through sewer with PP K2

Sewer System

External corrugated sewer with PP K2-Kan is designed for plumbing and sewer systems. The system is based on orange pipes and fittings in diameters from fi 110mm to fi 2400mm. Durability and usability make our products widely used in residential and general construction.

GASKET with PP DN 160mm
PLN1.86
The gasket with the entrance to the smooth PVC pipe with a diameter of DN 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Flake tee (with leaving for smooth pipe) with PP DN 160/160 angle 90 degrees
PLN36.62
Corrugated Tee (structural) K2-Kan with a diameter of 160/160mm angle 90 degrees, with a departure to the smooth pipe, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for the construction of sanitary and general sewage. The tee is made of the highest quality plastic with two sleeves without gasket, it is sturdy and sealed in joints.
"In situ" four-lip gasket PP DN 110mm
PLN29.67
The "in situ" four-lip gasket with the entrance to the smooth PVC pipe with a diameter of DN 110mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
GASKET PP CORED Pipe DN 160mm
PLN2.96
A seal for the (corrugated) flow pipe K2-Kan with a diameter of fi 160mm, double-lip, with the Polish standard PN-EN 13476-3, in black, is intended for the watertight joining of the pass pipes in the construction of sanitary and general sewer. Gasket made of the highest quality plastics, it is durable and tight in joints.
Pass-through pipe (double walled) PP DN 200x6000mm
PLN162.62
Corrugated pipe (structural) without a cup of K2-Kan with an internal diameter of fi 200mm with a length of 6 meters, with Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy type SN 8, in Orange, is designed for the construction of sanitary sewer and Combined. Pipes made of the highest quality plastic with gasket consist of two sturdy layers in this single corrugated.
Coupling z PP DN 160mm
PLN17.47
The coupling with the entrance to the smooth PVC pipe with a diameter of DN 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Cap with PP DN 160mm
PLN16.45
The cap with the entrance to the smooth PVC pipe with a diameter of DN 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Tee with PP DN 160 angle 45
PLN36.83
The tee with the entrance to the smooth PVC pipe with a diameter of DN 160mm 45 angle, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Knee with PP DN 160 angle 15
PLN17.72
Pass-through elbow with a diameter of DN 160mm, Angle 15, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the flow pipes in the construction of sanitary and general sewer. Made of high quality plastic with gasket, it is durable and tight in joints.
Tee with PP DN 160 Angle 90
PLN132.63
The tee with the entrance to the smooth PVC pipe with a diameter of DN 160mm 90 angle, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Crimper Nipple (for PVC Cup) with PP DN 160/160mm
PLN11.92
Corrugated (structural) coupling with the entry into the cup of PVC K2-Kan with a diameter of fi 160/160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed for joining the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic without gasket, it is durable and tight in joints.
Reduction from PP DN 200/160
PLN19.85
The reduction from the entrance to the smooth PVC pipe with a diameter of DN 200/160, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the flow pipes in the construction of sanitary and general sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Pass-through pipe PP SN10 DN/OD 160x3000mm
PLN57.25
Corrugated pipe (structural) with an internal diameter of 3 meters long fi 160mm, with Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy-duty type SN 10, in Orange, is designed for the construction of sanitary and general sewage. Pipes made of the highest quality plastic with a cup and gasket consist of two sturdy layers in this single corrugated.
Cork with PP DN 160mm
PLN10.95
Cork with the entrance to the smooth PVC pipe with a diameter of DN 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Plain pipe coupling with PP DN 160mm
PLN6.94
The coupling (ring with gasket) with the entrance to the smooth PVC pipe with a diameter of DN 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass pipes in the construction of sanitary sewer and Combined. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Leak-proof passage with PP DN 160mm
PLN15.24
The leak-tight passage with the entrance to the smooth PVC pipe with a diameter of DN 160mm, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is intended for joining the pass pipes in the construction of sanitary and general sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.
Pass-through pipe (double walled) PP DN 200x3000mm
PLN78.33
Corrugated pipe (structural) without a cup of K2-Kan with an internal diameter of fi 200mm with a length of 3 meters, with Polish standard PN-EN 13476-3, made of polypropylene (PP), heavy type SN 10, in Orange, is intended for the construction of sanitary sewer and Nationwide. Pipes made of the highest quality plastic with gasket consist of two sturdy layers in this single corrugated.
Fifth Wheel connection with PP DN 250/160
PLN123.72
The saddle connection with the entrance to the smooth PVC pipe with a diameter of DN 250/160, with the Polish standard PN-EN 13476-3, made of polypropylene (PP) in Orange, is designed to connect the pass-through pipes in the construction of sanitary and universal sewer. The coupling is made of the highest quality plastic with gasket, it is durable and tight in joints.