PVC pressure fittings for water mains.

Pressure Fittings

A wide range of pressure fittings with different dimensions and operating parameters for the installation of water supply systems, draining drinking waters. It consists of fittings in diameters up to fi 63mm up to fi 400mm in black.

Tee with Loose flange fi 90/80mm
Pressure tee with loose flange PN 10 with a diameter of fi 90/80mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is designed for joining pressure pipes that transmit drinking water. The tee with gasket made of the highest quality plastics allows to carry out a smooth installation of the watertight water mains, in addition, it is durable and resistant to corros
zł98.73
Pressure tee with internal thread fi 90/1.5 "
Pressure tee with internal thread, PN 10 with diameter fi 90/1, 5 "with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is designed for joining pressure pipes that transmit drinking water. The tee with gasket made of the highest quality plastics allows to carry out a smooth installation of the watertight water mains, in addition, it is durable and resistant to corrosi
zł117.80
Flanged bushing with Cup fi 90/80mm
Pressure bushing, flanged with a cup PN 10 with a diameter of fi 90/80mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is intended for joining pressure pipes that transmit drinking water. The sleeve with a cup and gasket made of the highest quality plastics allows to carry out the proper installation of a sealed water supply network, in addition, is durable an
zł89.70
Flanged bushing with a bare end of fi 90/80mm
Pressure bushing, flanged with a bare end PN 10 with a diameter of fi 90/80mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is intended for joining pressure pipes transmitting drinking water. The loose flange sleeve made of the highest quality plastics allows for a smooth installation of a sealed water supply network, and is also durable and resistant to corro
zł78.77
Pressure Tee PVC fi 90/90mm
Pressure Tee, cup PN 10, diameter fi 90/90mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is designed for joining pressure pipes that transmit drinking water. The tee with gasket made of the highest quality plastics allows to carry out a smooth installation of the watertight water mains, in addition, it is durable and resistant to corrosion.
zł100.98
Single Arch 11 ° DN 63mm
One-wire bow with 63mm diameter, 11 degree angle with Polish standard PN-EN ISO 1452-2, made of < span>Poly (vinyl chloride) PVC w kolorze czarnym, przeznaczony jest do łączenia rur ciśnieniowych pod różnym kątem, odprowadzających uzdatnioną wodę pitną. Łuk z uszczelką wykonany z tworzyw najwyższej jakości, jest wytrzymały i odporny na uszkodzenia mechaniczne.
zł11.44
Tee with Loose flange fi 110/80mm
Pressure tee with loose flange PN 10 with a diameter of fi 110/80mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is designed for joining pressure pipes that transmit drinking water. The tee with gasket made of the highest quality plastics allows to carry out a smooth installation of the watertight water mains, in addition, it is durable and resistant to corro
zł113.46
Flanged bushing with Cup fi 110/100mm
Pressure bushing, flanged with Cup PN 10 with a diameter of fi 110/100mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is intended for joining pressure pipes transmitting drinking water. The sleeve with a cup and gasket made of the highest quality plastics allows to carry out the proper installation of a sealed water supply network, in addition, is durable and
zł93.61
Flanged bushing with bare end fi 110/100mm
Pressure bushing, flanged with bare end PN 10 with a diameter of fi 110/100mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is intended for joining pressure pipes transmitting drinking water. The loose flange sleeve made of the highest quality plastics allows for a smooth installation of a sealed water supply network, and is also durable and resistant to corro
zł83.37
Pressure tee with internal thread fi 110/2 "
Pressure tee with internal thread, PN 10 with a diameter of fi 110/2 "with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is designed for joining pressure pipes that transmit drinking water. The tee with gasket made of the highest quality plastics allows to carry out a smooth installation of the watertight water mains, in addition, it is durable and resistant to corr
zł136.50
Pressure Tee PVC fi 110/90mm
Pressure Tee, cup PN 10, diameter fi 90/90mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is designed for joining pressure pipes that transmit drinking water. The tee with gasket made of the highest quality plastics allows to carry out a smooth installation of the watertight water mains, in addition, it is durable and resistant to corrosion.
zł126.68
Tee with Loose flange fi 110/100mm
Pressure tee with loose flange PN 10 with a diameter of fi 110/100mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is designed for joining pressure pipes that transmit drinking water. The tee with gasket made of the highest quality plastics allows to carry out a smooth installation of the watertight water mains, in addition, it is durable and resistant to corr
zł116.87
Flanged Sleeve with cup fi 160/150mm
Pressure bushing, flanged with a cup PN 10 with a diameter of fi 160/150mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is intended for joining pressure pipes transmitting drinking water. The sleeve with a cup and gasket made of the highest quality plastics allows to carry out the proper installation of a sealed water supply network, in addition, is durable a
zł156.40
Flanged bushing with bare end fi 160/150mm
Pressure bushing, flanged with bare end PN 10 with a diameter of fi 160/150mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is intended for joining pressure pipes transmitting drinking water. The loose flange sleeve made of the highest quality plastics allows for a smooth installation of a sealed water supply network, and is also durable and resistant to corro
zł120.75
Pressure tee with internal thread fi 160/2 "
Pressure tee with internal thread, PN 10 with a diameter of fi 160/2 "with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is designed for joining pressure pipes that transmit drinking water. The tee with gasket made of the highest quality plastics allows to carry out a smooth installation of the watertight water mains, in addition, it is durable and resistant to corr
zł184.19
Pressure Tee PVC fi 110/110mm
Pressure Tee, cup PN 10 with a diameter of fi 110/110mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is designed for joining pressure pipes that transmit drinking water. The tee with gasket made of the highest quality plastics allows to carry out a smooth installation of the watertight water mains, in addition, it is durable and resistant to corrosion.
zł135.57
Tee with Loose flange fi 160/100mm
Pressure tee with loose flange PN 10 with a diameter of fi 160/100mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is designed for joining pressure pipes that transmit drinking water. The tee with gasket made of the highest quality plastics allows to carry out a smooth installation of the watertight water mains, in addition, it is durable and resistant to corr
zł191.67
Flanged Sleeve with cup fi 225/200mm
Pressure bushing, flanged with a cup PN 10 with a diameter of fi 225/200mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is intended for joining pressure pipes transmitting drinking water. The sleeve with a cup and gasket made of the highest quality plastics allows to carry out the proper installation of a sealed water supply network, in addition, is durable a
zł331.20
Flanged bushing with bare end fi 225/200mm
Pressure bushing, flanged with bare end PN 10 with a diameter of fi 225/200mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is intended for joining pressure pipes transmitting drinking water. The loose flange sleeve made of the highest quality plastics allows for a smooth installation of a sealed water supply network, and is also durable and resistant to corro
zł226.55
Pressure Tee PVC fi 160/90mm
Pressure Tee, cup PN 10 with a diameter of fi 160/90mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is designed for joining pressure pipes which transmit drinking water. The tee with gasket made of the highest quality plastics allows to carry out a smooth installation of the watertight water mains, in addition, it is durable and resistant to corrosion.
zł278.62
Tee with Loose flange fi 160/150mm
Pressure tee with loose flange PN 10 with a diameter of fi 160/150mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is designed for joining pressure pipes that transmit drinking water. The tee with gasket made of the highest quality plastics allows to carry out a smooth installation of the watertight water mains, in addition, it is durable and resistant to corr
zł222.52
Pressure Tee PVC fi 160/110mm
Pressure Tee, cup PN 10 with a diameter of fi 160/110mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is designed for joining pressure pipes that transmit drinking water. The tee with gasket made of the highest quality plastics allows to carry out a smooth installation of the watertight water mains, in addition, it is durable and resistant to corrosion.
zł285.16
Single Arch 60 ° DN 63mm
A single-socket bow with a diameter of 63mm, an angle of 60 degrees with the Polish standard PN-EN ISO 1452-2, made of < span>Poly (vinyl chloride) PVC w kolorze czarnym, przeznaczony jest do łączenia rur ciśnieniowych pod różnym kątem, odprowadzających uzdatnioną wodę pitną. Łuk z uszczelką wykonany z tworzyw najwyższej jakości, jest wytrzymały i odporny na uszkodzenia mechaniczne.
zł19.39
PVC Double Nipple DN 63
The double-pressure coupling with a diameter of fi 63mm, with the Polish standard PN-EN ISO 1452-2, made of polyvinyl chloride PVC-U, in black, is intended for joining pressure pipes draining drinking water. Fittings made of the highest quality plastics are easy to assemble, corrosion resistant, and guarantee durability in the installation. 
zł9.07
Single Arch 22 ° DN 63mm
One-wire bow with 63mm diameter, 22 degree angle with Polish standard PN-EN ISO 1452-2, made of < span>Poly (vinyl chloride) PVC w kolorze czarnym, przeznaczony jest do łączenia rur ciśnieniowych pod różnym kątem, odprowadzających uzdatnioną wodę pitną. Łuk z uszczelką wykonany z tworzyw najwyższej jakości, jest wytrzymały i odporny na uszkodzenia mechaniczne.
zł23.51
Single Arch 90 ° DN 63mm
A single-socket bow with a diameter of 63mm, an angle of 90 degrees with the Polish standard PN-EN ISO 1452-2, made of < span>Poly (vinyl chloride) PVC w kolorze czarnym, przeznaczony jest do łączenia rur ciśnieniowych pod różnym kątem, odprowadzających uzdatnioną wodę pitną. Łuk z uszczelką wykonany z tworzyw najwyższej jakości, jest wytrzymały i odporny na uszkodzenia mechaniczne.
zł28.18
Single Arch 30 ° DN 63mm
One-wire bow with 63mm diameter, 30 degree angle with Polish standard PN-EN ISO 1452-2, made of < span>Poly (vinyl chloride) PVC w kolorze czarnym, przeznaczony jest do łączenia rur ciśnieniowych pod różnym kątem, odprowadzających uzdatnioną wodę pitną. Łuk z uszczelką wykonany z tworzyw najwyższej jakości, jest wytrzymały i odporny na uszkodzenia mechaniczne.
zł24.18
Tee with Loose flange fi 160/80mm
Pressure tee with loose flange PN 10 with a diameter of fi 160/80mm, with Polish standard PN-EN ISO 1452-3, made of polyvinyl chloride PVC-U in black, is designed for joining pressure pipes that transmit drinking water. The tee with gasket made of the highest quality plastics allows to carry out a smooth installation of the watertight water mains, in addition, it is durable and resistant to corro
zł173.90
Single Arch 45 ° DN 63mm
A single-socket bow with a diameter of 63mm, an angle of 45 degrees with the Polish standard PN-EN ISO 1452-2, made of < span>Poly (vinyl chloride) PVC w kolorze czarnym, przeznaczony jest do łączenia rur ciśnieniowych pod różnym kątem, odprowadzających uzdatnioną wodę pitną. Łuk z uszczelką wykonany z tworzyw najwyższej jakości, jest wytrzymały i odporny na uszkodzenia mechaniczne.
zł25.10
Single Arch 11 ° DN 90mm
Single-socket bow with 90 mm diameter, 11 degree angle with Polish standard PN-EN ISO 1452-2, made of < span>Poly (vinyl chloride) PVC w kolorze czarnym, przeznaczony jest do łączenia rur ciśnieniowych pod różnym kątem, odprowadzających uzdatnioną wodę pitną. Łuk z uszczelką wykonany z tworzyw najwyższej jakości, jest wytrzymały i odporny na uszkodzenia mechaniczne.
zł27.45