PP-R reducers Welded-10 YEARS WARRANTY

Reducers

Wide selection of PPR reducers with different dimensions and operating parameters for installation of central heating system and hot and cold water transmission. It consists of tees in diameters ranging from fi 16mm to fi 110mm in grey or white. 

Welded Reducer Tee PPR fi 20/16mm angle 90 degrees
Welded reduction tee with a diameter of 20/16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded Reducer Tee PPR fi 25/16mm angle 90 degrees
Welded reduction tee with diameter fi 25/16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded Reducer Tee PPR fi 25/20mm angle 90 degrees
Welded reduction tee with a diameter of fi 25/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded Reducer Tee PPR fi 32/20mm angle 90 degrees
Welded reduction tee with a diameter of fi 32/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded Reducer Tee PPR fi 32/25mm angle 90 degrees
Welded reduction tee with a diameter of fi 32/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded reducer Tee PPR fi 40/20mm angle 90 degrees
Welded reduction tee with a diameter of fi 40/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded reducer Tee PPR fi 40/25mm angle 90 degrees
Welded reduction tee with diameter fi 40/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded reducer Tee PPR fi 40/32mm angle 90 degrees
Welded reduction tee with diameter fi 40/32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded reducer Tee PPR fi 50/20mm angle 90 degrees
Welded reduction tee with a diameter of fi 50/20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded reducer Tee PPR fi 50/25mm angle 90 degrees
Welded reduction tee with diameter fi 50/25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded reducer Tee PPR fi 50/32mm angle 90 degrees
Welded reduction tee with diameter fi 50/32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded reducer Tee PPR fi 50/40mm angle 90 degrees
Welded reduction tee with diameter fi 50/40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded Reducer Tee PPR fi 63/32mm angle 90 degrees
Welded reduction tee with diameter fi 63/32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded Reducer Tee PPR fi 63/40mm angle 90 degrees
Welded reduction tee with diameter fi 63/40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded Reducer Tee PPR fi 63/50mm angle 90 degrees
Welded reduction tee with diameter fi 63/50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded Reducer Tee PPR fi 75/40mm angle 90 degrees
Welded reduction tee with a diameter of fi 75/40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded Reducer Tee PPR fi 75/50mm angle 90 degrees
Welded reduction tee with a diameter of fi 75/50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded Reducer Tee PPR fi 75/63mm angle 90 degrees
Welded reduction tee with a diameter of fi 75/63mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded reducer Tee PPR fi 90/50mm angle 90 degrees
Welded reduction tee with a diameter of fi 90/50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded reducer Tee PPR fi 90/63mm angle 90 degrees
Welded reduction tee with diameter fi 90/63mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded reducer Tee PPR fi 90/75mm angle 90 degrees
Welded reduction tee with a diameter of fi 90/75mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded reducer Tee PPR fi 110/50mm angle 90 degrees
Welded reduction tee with a diameter of fi 110/50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded reducer Tee PPR fi 110/63mm angle 90 degrees
Welded reduction tee with a diameter of fi 110/63mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded reducer Tee PPR fi 110/75mm angle 90 degrees
Welded reduction tee with a diameter of fi 110/75mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
Welded reducer Tee PPR fi 110/90mm angle 90 degrees
Welded reduction tee with a diameter of fi 110/90mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat.