Welded PPR Fittings

PP-R Welded fittings

Welded PPR fittings are designed for indoor installation. The system is based on grey or white fittings in diameters from fi 16mm to fi 90mm. Durability and usability make these products widely used in residential and general construction.

Welded elbow PP-R fi 16mm angle 90 degrees
Welded knee diameter fi 16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
zł0.22
Welded elbow PP-R fi 16mm angle 45 degrees
Welded knee diameter fi 16mm, angle 45 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
zł0.42
Welded nipple PP-R fi 16mm angle 90 degrees
Welded nipple with a diameter of fi 16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building . The knee made of the highest quality plastics is durable and resistant to heat. 
zł0.46
Welded PP-R fi 16mm
Welded with a diameter of fi 16mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
zł0.31
PP-R fi 16/20mm reduction
Welded reduction with a diameter of fi 16/20mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and heat resistant. 
zł0.24
Welded Tee PP-R fi 16mm angle 90 degrees
Welded tee with a diameter of fi 16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The tee made of the highest quality plastics is durable and resistant to heat. 
zł0.34
Welded Reducer Tee PPR fi 20/16mm angle 90 degrees
Welded reduction tee with a diameter of 20/16mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The tee made of the highest quality plastics is durable and resistant to heat. 
zł0.53
Tee with external thread PP-R fi 16x1/2
A tee with external thread diameter fi 16x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
zł4.06
Welded elbow PP-R fi 20mm angle 90 degrees
Welded Knee diameter fi 20mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
zł0.27
Tee with internal thread PP-R fi 16x1/2
A tee with internal thread of diameter fi 16x1/2 "mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water Indoor. The tee made of the highest quality plastics is durable and resistant to heat. 
zł3.07
Ball valve PP-R fi 20mm
A ball valve with a diameter of fi 20mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The ball valve made of the highest quality plastic is durable and resistant to heat. 
zł8.99
PP Plug-RCT fi 20mm
PP-RCT fi 20mm plug, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant. 
zł0.35
with external thread PP-R fi 16x1/2
with external thread diameter fi 16x1/2 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
zł3.08
PP Plug-RCT fi 25mm
PP-RCT fi 25mm plug, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant. 
zł0.46
with internal thread PP-R fi 16x1/2
with Internal thread fi 16x1/2 mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The made of the highest quality plastic is durable and resistant to heat. 
zł2.48
PP Plug-RCT fi 32mm
PP-RCT fi 32mm plug, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant. 
zł0.63
Screw with external thread PP-R fi 20x1/2
Screw with external thread diameter fi 20x1/2 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
zł7.45
Screw with internal thread PP-R fi 20x1/2
Screw with internal thread fi 20x1/2 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside the building. The high-quality plastic screw is durable and heat resistant. 
zł6.50
Semi-screw with internal thread PP-R fi 20x3/4
Semi-screw with inner thread diameter fi 20x3/4 "mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is designed for the installation of central heating and transmission of hot and cold water inside Building. The semi-screw made of the highest quality plastics is durable and resistant to heat. 
zł2.79
Elbow with external thread PP-R fi 16x1/2
Elbow with external thread of diameter fi 16x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 
zł3.50
Elbow with internal thread PP-R fi 16x1/2
Elbow with internal thread of diameter fi 16x1/2 ", angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside Building. The knee made of the highest quality plastics is durable and resistant to heat. 
zł2.72
Elbow GW Hanger PP-R fi 16x1/2
Knee hanger with inner thread diameter fi 16x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
zł2.59
Elbow GZ Hanger PP-R fi 16x1/2
Knee hanger with external thread diameter fi 16x1/2mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water Indoor. The knee made of the highest quality plastics is durable and resistant to heat. 
zł3.82
Holder fi 20mm
The holder fi 20mm, with the Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PP) in grey or white, is designed for the installation of central heating inside the building. The handle made of the highest quality plastic is durable and resistant to heat. 
zł0.34
Welded elbow PP-R fi 25mm angle 90 degrees
Welded Knee diameter fi 25mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
zł0.38
PP-R plug fi 16mm
PPR fi 16mm, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating, tight closure of the pipeline circuit inside the building. The top-quality blanking cap is durable and heat resistant. 
zł0.22
Welded elbow PP-R fi 32mm angle 90 degrees
Welded Knee diameter fi 32mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
zł0.71
Welded elbow PP-R fi 40mm angle 90 degrees
Welded knee diameter fi 40mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
zł1.33
Welded elbow PP-R fi 50mm angle 90 degrees
Welded Knee diameter fi 50mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
zł2.53
Welded elbow PP-R fi 63mm angle 90 degrees
Welded Knee diameter fi 63mm, angle 90 degrees, with Polish standard PN-EN ISO 15874-2:2005, made of polypropylene (PPR) in grey or white, is intended for installation of central heating and transmission of hot and cold water inside the building. The knee made of the highest quality plastics is durable and resistant to heat. 
zł4.66