Butt molted Arches PE100 PN 10 Angle 30 °

Moulded angle Curves 30 °

Moulded arch PE100 PN 10 fi 63 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 63mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 75 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of 75mm, an angle of 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 90 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of 90 mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 110 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 110mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 125 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 125mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 140 angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 140mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 160 angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 160mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 180 angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 180mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 200 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 200mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 225 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 225mm, an angle of 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 250 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 250mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 280 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with diameter fi 280mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 315 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 diameter fi 315mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 355 Angle 30 °
Moulded Arch PE 100, PN 10 SDR 17, diameter fi 355mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 400 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 400mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 450 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with diameter fi 450mm, angle 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 500 angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 500mm, an angle of 30 degrees with the standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 560 angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 560mm, an angle of 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.
Moulded arch PE100 PN 10 fi 630 Angle 30 °
Moulded Arch PE 100 PN 10 SDR 17 with a diameter of fi 630mm, an angle of 30 degrees with standard EN 1555, 12201, made of high density polyethylene in black, is intended for gas and water installations of underground and terrestrial. Due to its high resistance to chemicals, it is also used in industrial installations.